• Journal of Plant Biotechnology
• /
• v.34 no.1
• /
• pp.37-45
• /
• 2007

The genetic transformation of watermelon by Agrobacterium has been known very difficult and a few successful cases have been reported by obtaining the direct shoot formation. However, since this direct shoot formation is not guaranteed the stable transformation, the stable transformation with reproducibility is required by a different approach such as a callus induced manner. The best conditions for inducing the callus from cotyledon and root explants of watermelon were 2 mg/L zeatin + 0.1 mg/L IAA and 2 mg/L BA + 0.1 mg/L 2,4-D, respectively. The GFP expression in the callus was identified and monitored through fluorescent microscopy after transformation with pmGFP5-ER vector. Paromomycin rather than kanamycin was used for selecting the nptll gene expression because it was more effective to select the watermelon explants. Four different callus types were observed and the solid green callus showed stronger GFP expression. The highest frequency of GFP expression in the callus developed from cotyledon was 9.0% (WM8 inbred line), while the highest frequency from root was 8.3% (WM6 inbred line). The WMV-CP was transformed using the method of GFP transformation and the genetic transformation of WMV-CP was confirmed by PCR and Southern blot analysis. Here we present a system for callus induction of watermelon explant and the callus induced method would facilitate the establishment of stable watermelon transformation.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1991.06a
• /
• pp.70-75
• /
• 1991

기어는 기계시스템에서 동력전달 및 운동전환을 담당하는 기본 요소로 공작기계, 건설기계, 농업기계 등의 산업기계와 항공기, 자동차, 선박등의 운송분야, 사무용 및 계측기기 등 산업전반에 걸쳐 사용되고 있으며, 최근에는 로보트를 위시한 자동화 장치의 구동 및 동력전달 장치로 사용되고 있다. 최근의 기어시스템은 기계류의 일반적인 경향인 고속, 고부하, 결량화 추세에 따라 고정밀, 소형화되어 가고 있으며 부하한계에 가깝도록 큰 하중에 견딜것이 요구되고 있다. 따라서 기어의 설계 및 제작시, 여유있는 설계가 허용되지 않으며 정밀성을 높이기 위한 설계로, 설계인자의 세분화가 요구되어지고 있다. 국제적으로 통용되고 있는 강도설계 규격에서 면압강도시 표면상태계수(Surface condition factor)를 정의하고 있다. 본 연구에서는 동력순환식 기어 시험장치를 이용하여 표면처리 상태가 다른 3종류(열처리를 하지 않은 기어, 침탄 및 고주파 표면 열처리한 기어)의 스퍼어 기어를 이요하여 회전수별 표면거칠기의 변화 상태를 고찰하고, 변수를 응용하여 물리적 의미를 파아갛고, 윤활해석을 통한 윤활조건과 치면상태와의 상호 관계에 대하여 고찰해 보고자 한다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.600-606
• /
• 2006

실제 지반은 경계가 없는 무한상태로 존재하기 때문에 지반구조물의 동적거동을 유한요소법을 이용하여 해석할 시 모델의 영역을 성립하는 것은 특별한 고려가 필요하다. 유한요소법에서의 동적해석은 파동의 전달을 포함하기 때문에 모델의 경계에서 인공적인 경계조건이 필요하다. 인공적인 경계 조건은 유한요소내의 지반상태를 무한상태로 변형시킬 수 있어야 하며, 경계에 도달하는 응력 파동을 모델내로 반사시키지 않고 흡수 할 수 있어야 한다. 본 논문에서는 간단한 점 탄성 반무한 불연속 요소를 이용하여 지반구조물의 동적해석을 수행하는 방법을 보여준다. 반무한 요소의 실행은 OpenSees라는 유한요소 해석프로그램을 이용하여 수행되었으며, 예를 통하여 불연속 요소가 경계에 도달하는 응력 파동을 충분히 흡수하여 유한요소 모델을 반무한 상태로 전환 시킬 수 있다는 것을 보여준다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.700-709
• /
• 2007

The heterogeneous wireless access networks has been envisioned to characterize the future wireless networks. In such environments, TCP(Transmission Control Protocol) has to experience poor end-to-end performance because bandwidth and link delay change suddenly when a mobile node moves over different types of wireless networks, which is called vertical handoff. In this paper, we propose a new TCP which maintains each set of congestion control variables, which we call TCP context, for each type of wireless network. The proposed TCP can switch the TCP context against vertical handoff in order to adjust quickly to a newly arrived network. In simulations, the proposed TCP has higher throughput than TCP SACK(Selective Acknowledgment Options) due to its great features to vertical handoff situations.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.129-135
• /
• 2011

The alternate adaptation algorithm (AAA) is proposed to improve the convergence characteristics and steady-state performance of the constant modulus algorithm (CMA). The alternate adaptation algorithm is a new equalization method which adapts an equalizer alternately by the algorithm with excellent blind convergence characteristics or the algorithm with better steady-state error performance. In this paper, it is introduced that the alternate adaptation equalization of the vsCMA (variable step-size CMA) and the decision-directed (DD) algorithm. We, first, designed the vsCMA with variable step-size to improve the steady-state error performance of the CMA, and combined it with the DD by alternate adaptation. As a result, it was mitigated that the sensitivity of performance fluctuation due to switching timing in CMA-DD switching method, and it was improved that the convergence speed and steady-state error performance of the CMA. Through computer simulations, under multipath channel condition, the usefulness of the proposed method was confirmed for 16-QAM.

• KSBB Journal
• /
• v.18 no.6
• /
• pp.517-521
• /
• 2003

Superoxide dismutase which is metalloenzyme that decomposes superoxide radicals into hydrogen peroxide and molecular oxygen. Vitreoscilla has FeSOD. Expression of FeSOD to paraquat was largely constitutive. This suggests that the basal level of FeSOD is sufficient to provide protection against superoxide generated during normal aerobic metabolism. Induction of SOD by iron supports that insertion of the active site metal into the corresponding apoprotein. The effect of paraquat on induction by iron seemed that iron brought the synergism effect in SOD activity with paraquat. It suggests that the relief of growth inhibition is due to protection against the lethality of O$_2$afforded by the elevated SOD. There may be control of FeSOD activity posttranslationally. Posttranslation control of enzyme function is particularly feasible for a metalloenzyme, for which conversion of apo- to holoenzyme may be the rate-limiting or regulatory step.

• Journal of Information Technology and Architecture
• /
• v.9 no.4
• /
• pp.443-453
• /
• 2012

In order to minimize the damage from system failures, systems over various fields are requested to contain the safety-critical features. In this paper, we deliver the considerable issues, especially, in the cyber physical systems that is recently used as a safety-critical system, as well as we propose the model driven architecture based on time as its the important factor. Based on meta-modeling approach, we introduce the time-based architecture which is associated with deadline, transition state, and threshold, and also we work out a design for this by using model driven architecture. We propose a realizable safety-critical architecture by means of showing failure handling components with safety transaction model from the meta-model. In the detailed models and the example, we design a basic safety processing state, a multiple safety processing state, and a compound safety processing state for completing the safety-critical system architecture.

• Digital Contents
• /
• no.1 s.152
• /
• pp.43-46
• /
• 2006

영화 산업의 디지털화가 급속히 진행되고 있다. 필름 없는 영화를 가능케 하는 디지털 시네마는 제작비용 절감.고화질 구현, 신규 비지니스 모델 창출 등 영화 시장의 새로운 장을 열 것으로 기대를 모으고 있다. 이미 전세계 주요 국가들은 디지털 시네마의 주도권을 잡기위한 본격저인 경쟁에 돌입한 상태.국내에서도 2004년 디지털 시네마 포럼을 결성하여 첫걸음을 내디뎠다. 정부도 2010년까지 전체 스크린의 50% 디지털 전환을 목표로 사업 추진에 들어갔다.

• Journal of Labour Economics
• /
• v.29 no.3
• /
• pp.113-150
• /
• 2006

This study examines how labor unions change in the 21st centry and what is needed for successful transformation of Korean labor union. The study identifies four major driving forces of change in union's role. They are changes in industrial and occupational structures, utilization of information technology, labor substitution, and changing attitude of workers. The effects are decrease in union membership, shrinking coverage of bargaining, weakening voice mechanism, and representation. Thus, labor unions in the 21st centry transform themselves into service union, individual representation system, and worker participation model. Korean labor union, with its current reputation of militant unionism, needs to transform into above mentioned model. Two keys for the change are market competition and family unionism.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.7
• /
• pp.712-718
• /
• 2008

This paper deals with a development of flight control law switching system which can be used for flight test of the research control law by switching control law during flight. Through this research program, fader logic and integrator stabilization design has been introduced to minimize the transient response of aircraft caused by flight control law switching and to prevent the divergence of the integrator included in the control law in standby mode. MIL-STD-1553B communication was applied to transfer the data between the two control laws. This paper introduce the control law switching system architecture and major design concept and include the system verification and validation result performed on the flying quality simulator of the advanced trainer.