• Title/Summary/Keyword: 전하중

Search Result 421, Processing Time 0.023 seconds

Surgical Angioplasty of Left Main and Proximal Left Anterior Descending Coronary Artery (좌주관상동맥및 좌전하챙지기시부의 수술적 혈관 성형술)

  • 이원용;김응중
    • Journal of Chest Surgery
    • /
    • v.29 no.8
    • /
    • pp.861-866
    • /
    • 1996
  • Surgical angioplasty of isolated stenosis of the left main coronary artery(LMCA) restores a more physiologic flow to the myocardium, allows percutdneous transluminal coronary angioplasty (PTCA) of distal coronary stenoses at a later stage, and is a less time consuming and convenient procedure than the conventional coronary artery bypass grafting(CABG) . Between Jul. 1994 and Dec. 1995, 7 surgical angioplasty had been performed. LMCA stenoses involved ostium in 2 patients, middle third in 3, and dis- tal third in 2. In 2 patients, the origin of left anterior descending coronary artery was involved in conjunction with LMCA. T e additional coronary artery stenoses were found in 2 cases. One patient was emergently operated after coronary angiography following his cardiac arrest. LMCA was approached anteriorly in all patients. The pulmonary artery was transected in 3 patients for a better exposure. The onlay patch consisted or autologous or bovine pericardium. There was no postoperative myocardial infarction or mortality. Left ventricular functions were well preserved in all patients. Postoperative coronary angiography revealed widely patent LMCA in 5 cases, and mild narrowing of distal anastomotic sites in 2 cases. Provided that well defined indications are followed correctly, surgical angioplasty can be a safe alternative to conventional CABG.

  • PDF

Studies on the Surface Charge Characteristics of Two Inceptisols and One Aridsol in Hawaii (하와이 화산회(火山灰)로부터 발달한 Inceptisols과 Aridsol 토양(土壤)의 표면전하(表面電荷) 특성(特性)에 관(關)하여)

  • Lim, Sookil H.
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.14 no.3
    • /
    • pp.110-116
    • /
    • 1981
  • Soil surface charge which manipulates some important soil physico-chemical properties such as nutrient and water holding abilities, colloidal stability and soil erosion was investigated in wide range of soil pH, using soils developed originally from same volcanic ash deposit but under different rainfall condition in Hawaii. The results can be summarized as follows : 1. Ustollic Camorthid (Kawaihae soil) which was developed under the lowest rainfall (less than 500 mm/yr) revealed low Z.P.C. (4.5-5.0) and less dependence of net charge on concentration of indifferent electrolytes. 2. Typic Hydrandepts (Akaka and Hilo soils) which were developed under the high rainfall (3050-7600 mm/yr) showed the Z.P.C. in between 5.5-7.0 and high dependence of net charge on concentration of indifferent electroytes. 3. It was found by X-ray diffraction together with total chemical analysis that amorphous materials were dominant (above 6.0%) in Typic Hydrandepts while dehydrated halloy-site (1 : 1 clay minerals) was dominant (45-50%) in Ustollic Camorthid. 4. In spite of little difference in particle size distribution of the soils, the difference of specific surface area was remarkable showing the order of Akaka (289) > Hilo (268) > Kawaihae (93). 5. It was evident, taking account of apparent field pH values, 5.2 of Akaka, 5.5 of Hilo and 7.0 of Kawaihae soil, respectively, that Akaka, and Hilo soils would show either positive or near zero (+ or 0) of ${\Delta}pH$ while Kawaihae soil would exhibit negative (-) of ${\Delta}pH$ at natural field condition.

  • PDF

Prediction of optimum pH of hydrolases

  • Sung, Nak-Gyu;Yoo, Young-Je
    • 한국생물공학회:학술대회논문집
    • /
    • 2000.11a
    • /
    • pp.571-574
    • /
    • 2000
  • Hydrolase is a group of the most widely used enzymes in industrial biological processes. Generally, their activities are easily changed with pH. With this characteristics, research for the optimal pH of hydrolases is required to obtain the optimization of process conditions. We selected xylanase, lysozyme, glucoamylase and barnase as model enzymes. To predict optimum pH of hydrolases, the calculation program based on Tanford-Kirkwood(TK) model was used. Results show that charge difference of catalytic residues is an important parameter deciding optimum pH and when charge difference of catalytic residues is maximum, optimum pH of the hydrolase establishes.

  • PDF

타이어로 인한 교통사고의 미연방지

  • Lee, Won-Seon
    • The tire
    • /
    • s.120
    • /
    • pp.44-47
    • /
    • 1985
  • 타이어는 비록 둥글고 간단한 것으로만 보이고 있지만, 일단 자동차에 끼워서 움직이게 될 때에는 그 역할이야말로 실로 크다고 할 수 있다. 타이어의 기능을 크게 요약해 보면, 첫째, 타이어는 차량의 전하중을 지지하며, 둘째, 스프링작용을 하며, 셋째,자동차의 구동력ㆍ제동력을 전달하며, 자동차를 조종하기 쉽도록 한다. 이와같은 주요기능이 자동차의 성능에 매치되어 안전운행에 그 역할을 다하게 된다. 따라서 이러한 주요역할을 일시적이나마 도외시하여 과마모된 타이어나 상처가 심한 타이어 등을 사용하게 된다면, 불의의 교통사고를 일으킬 뿐 아니라 인명까지 잃게 된다. 그러므로 보다 타이어에 대한 일반인식이 달라지도록 계도하여 날로 더해가는 타이어로 인한 교통사고를 다소라도 미연에 방지하고자 본고에서는 "교통안전진흥공단"에서 발간한(85.4) "우리나라 도로운송차량안전기준의 개선방향에 관한 연구"(차성한, 김준식 연구원) 중에서 특히 타이어에 관한 내용만을 발췌하여 요약해 보았다 <편집자 주>

  • PDF

Adhesion of Alumina Slurry Particles on Wafer Surfaces during Cu CMP (Cu CMP 공정중 Wafer 표면의 알루미나 연마입자의 점착)

  • Hong, Yi-Koan;Park, Jin-Goo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.07b
    • /
    • pp.1292-1295
    • /
    • 2004
  • 본 연구는 Cu CMP공정 중 알루미나 연마입자의 wafer 표면에서의 점착과 오염을 AFM (Atomic Force Microscopy)을 사용하여 슬러리내에서 점착력 측정과 실제 연마 후 wafer 표면의 오염을 실험적으로 비교 평가하였다. 연마입자의 adhesionn force 측정에 있어서도 역시 wafer들의 zetapotential 결과와 잘 일치하였으며, 모든 wafer 종류에 관계없이, 산성 영역에서 염기성영역의 슬러리가 적용됨에 따라 adhesion force가 작아짐을 확인할 수 있었다. 특히 FSG wafer의 zetapotential 결과는 비록 산성 분위기에서는 양성 전하값을 나타내었으나, 염기성 분위기의 pH에서는 급격하게 음성 전하값을 나타내었고, 이는 adhesionn force결과와 FESEM 결과와 잘 일치하였다.

  • PDF

Effects of Soil Component and Index ion on the Surface Charge Characteristics of some Korean arable soils (일부 경작지 토양의 표면전하 특성에 미치는 점토광물, 유기물 및 지표이온의 영향)

  • Ok, Yong-Sik;Choi, You-Suk;Lee, Sang-Eun;Lim, Soo-Kil;Chung, Nam-Hyun;Kim, Jeong-Gyu
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.34 no.4
    • /
    • pp.237-244
    • /
    • 2001
  • Investigation on the surface charge properties of some Korean arable soils was performed by ion adsorption technique with two kinds of indifferent ion ($Na^+$ and $K^+$) at the range of pH 3 to 9 in bulk solution. The contribution of soil components(organic matter, oxides and clay mineral) on the surface charge density was determined at two soil depth with different solid particle composition When the pH of solution increased, the negative charge of soil surface was increased among the all soils, but positive charge were not appeared above pH 6. apparently. The magnitude of surface charge density measured by NaCl adsorption method showed ra nges of $0.01{\sim}2.84cmol_c{\cdot}kg^{-1}$ and $7.41{\sim}12.20cmol_c{\cdot}kg^{-1}$ at pH 3 and pH 9, respectively. Ion adsorption method using KCl as index ion overestimated than the method using NaCl as index ion. The content of organic matter is the strongest factor on the value of dCEC/dpH.

  • PDF

A Design of an Automatic Current Correcting Charge-Pump using Replica Charge Pump with Current Mismatch Detection (부정합 감지 복제 전하 펌프를 이용한 자동 전류 보상 전하 펌프의 설계)

  • Kim, Seong-Geun;Kim, Young-Shin;Pu, Young-Gun;Park, Joon-Sung;Hur, Jeong;Lee, Kang-Yoon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.47 no.2
    • /
    • pp.94-99
    • /
    • 2010
  • This paper presents a charge pump architecture for correcting the current mismatch due to the PVT variation. In general, the current mismatch of the charge pump should be minimized to improve the phase noise and spur performance of the PLL. In order to correct the current mismatch of the charge pump, the current difference is detected by the replica charge pump and fed back into the main charge pump. This scheme is very simple and guarantees the high accuracy compared with the prior works. Also, it shows a good dynamic performance because the mismatch is corrected continuously. It is implemented in 0.13um CMOS process and the die area is $100{\mu}m\;{\times}\;160{\mu}m$. The voltage swing is from 0.2V to 1V at supply voltage of 1.2V. The charging and discharging currents are $100{\mu}A$, respectively and the current mismatch due to the PVT variation is less than 1%.

A Study on the Development of Electrophotographic Photoreceptor by Metal free-Phthalocyanine Dye Sensitized System (무금속프탈로시아닌 색소계를 이용한 전자사진 감광체의 개발에 관한 연구)

  • Jeong, Eun-Sil;Kim, Yeong-Sun;Jeong, Pyeong-Jin
    • Korean Journal of Materials Research
    • /
    • v.10 no.1
    • /
    • pp.7-14
    • /
    • 2000
  • The object of this study was to improve electrophotographic photoreceptor using metal free-phthalocyanine dye sensitized system. In here a various types of metal free-phthalocyanine and polymers and hydrazone were used as charge generation material(CGM) and binder, respectively, and also the hydrazone derivative or zinc complex was used as charge transport material(CTM). It was found that $x-H_2Pc$ showed the highest sensitivity among the ${\alpha}-$, ${\beta}-$ and x- metal free-phthalocyanine($x-H_2Pc$) as CGM. The photoreceptor made by $x-H_2Pc$ and hydrazone derivative as CGM and CTM, respectively, showed the highest ratio of dark decay having 73.1% and the good sensitivity of $1.50lux{\cdot}sec$ compared to other photoreceptors.

  • PDF

실리콘 다이오드를 적용한 다채널 중성 입자 분석기 개발

  • Cheon, Se-Min;Jwa, Sang-Beom;Gang, In-Je;Lee, Heon-Ju
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.211-212
    • /
    • 2011
  • 플라즈마를 제어하기 위해서는 플라즈마의 온도, 밀도, 에너지 분포등과 같은 플라즈마의 특성을 정확히 측정할 수 있어야한다. 핵융합발전에서는 플라즈마를 발생하기 위하여 플라즈마의 온도, 밀도 등 각종 변수들을 시공간적으로 계측, 분석할 수 있는 진달설비를 사용하고 있으며, 정확한 플라즈마 제어와 측정을 위한 새로운 진단기술을 개발하고 있다. 그리고 중요한 변수중에 하나인 플라즈마 이온온도를 측정하기 위해 중성입자 검출법이 잘 알려져 있다. 이 실험은 수소 중성입자가 토카막 내부의 플라즈마 이온과 충돌하면서 생성된 고속 중성입자의 에너지를 분석하는 실험이다. 본 연구의 실험방법은 수소 중성입자를 이온빔 장치에서 이온화 시킨 후 자체 제작한 가속기를 통하여 가속시켜 에너지 특성을 분석을 하는 것이다. 본 연구의 실험장치로 에너지 교정용 100 keV 이온빔 소스를 제작 하였고 이온빔 장치 내부에 수소기체를 주입하고 기체방전을 일으켜 플라즈마를 발생시켰다. 이온빔 외부에는 팬을 설치하고 전도성이 강한 물 대신 전도성이 약한 오일을 사용하여 냉각 하였다. 이온빔 장치와 결합될 이온 가속장치는 지름 300 mm, 두께 2 mm의 원형 구리판을 여러층으로 쌓아 전극으로 제작하였고 전극과 전극 사이에서 코로나 방전과 스파크를 방지하기 위해 전극 둘레에 코로나링을 설치 하였다. 또한 전극 사이마다 1G${\Omega}$의 저항을 설치한 후 고전압을 생성하여 이온 가속 효율을 증대시켰다. 진공시스템으로는 Alcatel사의 CFF100 터보분자 펌프와 우성진공사의 MVP24 진공로타리펌프를 결합하여 사용하였으며, 진공도측정은 Alcatel사의 ACS1000 장치를 사용하였다. 고진공후 고속 중성입자의 이온화와 에너지 측정을 위한 전하교환기를 설치하였다. 전하교환기로는 진공시스템을 별도로 설치하고 비용이 비교적 많이 드는 기체형 전하교환기 대신 소형화가 가능하고 유지보수가 좋은 고체형 전하교환기 제작하여 실험 하였다. 전하교환기에서 이온화된 고속 중성입자가 전기장이나 자장에 영향을 받았을때 에너지분포를 디텍터를 통해 측정하였다. 즉, 이온화된 중성입자의 에너지가 실리콘 다이오드를 통해 전압 펄스 신호로 변환되고 이차 증폭기를 통해 전압 펄스 신호들이 증폭한다. 에너지 측정을 위한 디텍터는 소형화가 가능하고 비용이 비교적 적게 드는 실리콘 다이오드를 설치하였다. 본 연구결과 중성입자 에너지 분석 장치가 실제 핵융합 장치의 플라즈마 이온온도와 특성 측정에 적용할 수 있으며, 앞으로 개발될 여러 형태의 응용 플라즈마 발생장치의 플라즈마 진단에 이용될 것으로 기대한다.

  • PDF

여름철 낙뢰 발생 시 강수 및 위성의 휘도온도 특성

  • Lee, Yun-Jeong;Seo, Myeong-Seok;O, Seok-Geun
    • 한국지구과학회:학술대회논문집
    • /
    • 2010.04a
    • /
    • pp.38-39
    • /
    • 2010
  • 낙뢰란 뇌운 속에서 분리 축적 된 음 (-)과 양 (+)의 전하 사이 또는 뇌운 속의 전하와 지면에 유도되는 전하 사이에서 발생하는 불꽃 방전을 말한다. 뇌운 안에는 이 불꽃 방전을 반복하기에 충분한 전하의 분리가 계속 일어나고 있는데, 그 결과 양전하 (+)는 구름의 상부에 넓게 분산되어 분포하고, 음전하 (-)는 주로 구름 하부에 분포한다. 이 때 음전하가 대지로 방전되어 발생하는 낙뢰를 부극성 (-)낙뢰, 양전하가 대지로 방전되어 발생하는 낙뢰를 정극성 (+)낙뢰라 한다. 낙뢰의 약 80%는 구름 내부 또는 구름 대 구름 사이에서 발생하고, 약 20%만이 구름과 지면 사이에서 발생하는데, 이러한 구름-지면 낙뢰 (Cloud-to-ground lightning)는 가장 위험하고 그 피해도 크다. 우리나라는 동아시아 몬순 기후의 영향으로 여름철에 대기가 불안정하여 낙뢰가 집중적으로 발생하며, 복잡한 지형과 해양의 영향으로 낙뢰현상의 공간적 변동도 크게 나타난다. 이러한 낙뢰는 최근으로 올수록 강도가 증가하고 있어 그 피해의 증가가 우려되기 때문에 낙뢰 발생 특성에 대한 연구가 필요하다. 본 연구에서는 낙뢰자료와 강수자료, 그리고 시 공간 분해능이 뛰어난 MTSAT-1R (Multi-functional Transport SATellite - 1 Replacement) 정지궤도 위성의 휘도온도를 이용하여 낙뢰 발생 시 강수 및 위성 휘도온도의 특성을 분석하고자 한다. 이러한 연구는 대류활동에 대한 정보 제공 뿐 아니라, 낙뢰 예측성 향상 및 재해 경감에도 활용될 수 있을 것이다. 본 연구에서는 2001년 기상청에 도입되어 운영 중인 신 낙뢰관측 시스템 (Total Lightning Detection System, TLDS)에서 관측된 낙뢰자료와 MTSAT-1R 위성에서 관측된 휘도온도 자료, 그리고 자동기상관측장비 (Automatic Weather System, AWS)에서 관측된 강수자료를 사용하였으며, 세 자료의 출처는 모두 기상청이다. 분석 기간은 2006년부터 2007년까지이며 우리나라에서 낙뢰발생 빈도가 여름철에 집중되어 나타나는 것을 고려하여 여름철 (6~8월) 낙뢰에 대해서만 분석하였다. 또한 낙뢰 발생 사례에 대하여 관측 효율이 90% 이상으로 알려진 위도 $33{\sim}39^{\circ}N$, 경도 $124{\sim}130^{\circ}E$ 영역에서 낙뢰발생시 강수 및 위성 휘도온도의 특성을 분석하였다. 사례는 낙뢰 발생 횟수가 많은 날을 중심으로 먼저 적외영상과 낙뢰영상을 정성적으로 분석한 후 뇌우의 지속시간이 긴 9개 사례를 선정하였다. MTSAT-1R 위성과 낙뢰자료 및 강수자료는 관측주기와 공간규모가 서로 다르기 때문에 세 자료를 함께 사용하기 위해서는 시 공간을 일치시키는 과정이 필요하다. 본 연구에서는 위성자료 관측시간(00분, 33분)과 AWS 지점 위 경도를 시 공간 일치를 위한 기준으로 사용하였다.

  • PDF