• Journal of Aquaculture
• /
• v.15 no.2
• /
• pp.87-93
• /
• 2002

To improve the efficiency of biological filters used for treating recycled wastewater of aquaculture, the conventional and advanced DynaSand Filters were tested. Applying the fluid mechanics and physical chemistry theories to wastewater treatment plant, the advanced filter focuses on detection of wastewater characteristics and automatic operation of DynaSand Filter to improve backwashing, oxygen transport, turbidity removal and continuous head loss. The Filter removes COD, ammonia, and suspended solids (SS), the major pollutants in aquaculture wastewater. The total volume of the DynaSand Filter is 70 L, while the working volume is 35 L per cycle. The removal efficiency of the advanced DynaSand Filter is 71 % for SS (as against 55 % for the conventional filter), 84 % for ammonia, 85 % for T-P, and 88 % for SRP.

• Journal of Energy Engineering
• /
• v.20 no.4
• /
• pp.278-285
• /
• 2011

Computational modelling and simulation for the charge-discharge characteristics of Lithium-ion batteries have been carried out. The battery system consists of a simplified 2-dimensional single cell for the modelling, in which the thermal modelling on the charge-discharge characteristics was conducted in the temperature range from 288 K through 318 K by using FEMLAB as an engineering PDE solver. While material parameters adopted in the present modelling were dependent on the system temperature, their thermal modelling were applied on the simulations of the charge-discharge period and the rate of transferring charges systematically. The resulting simulation shows that the cycle of the charge-discharge shorten itself by reducing the system temperature, regardless of the charge-discharge rates. In addition, the mass-transport phenomena of Lithium ion have been discussed in connection with the charge-discharge characteristics in the battery.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.99-103
• /
• 2013

An emzymatic bioanode for a glucose/oxygen biofuel cell was prepared by the sequential coating of carbon nanotube (CNT), charge transfer complex (CTC) based on tetracyanoquinodimethane (TCNQ) and tetrathiafulvalene (TTF), glucose oxidase (GOx), and polyion complex (mixture of poly-L-lysine hydrobromide and poly (sodium 4-styrenesulfonate)) on a glassy carbon electrode. A biocathode was also prepared by the sequential coating of CNT, bilirubin oxidase (BOD), 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), and polyion complex. The effect of CNT and CTC on the electrochemical performance was investigated. The biofuel cell exhibited a promising performance with maximum power densities of 3.6, 10.1, and $46.5{\mu}W/cm^2$ at 5, 20, and 200 mM of glucose concentration, respectively. The result indicates that the biofuel cell architecture prepared in this study can be used in the development of biofuel cells and biosensors.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.396-402
• /
• 1999

To verify enchancing effect of polycation of polycation on the retroviral infecivity, we directly measured the binding affinity of retroviruses to the target cells in the presence or in the absence of polybrene with R18 fluorescence assay and examined the effect of the polymers on the relationship between the host cell and the retroviral infecity. There was no difference in the effect of the types of charge of the polymer on the binding affinity. However, polycations, in general, show effect on the retrovirus infecity. This results suggest that the enhancing effect of polybrene and other polycations on the infecity is not due to the binding step but due to the post-binding steps, especially the internalization step. With the result of the internalization of FITC-labeled poly-L-lysine into the host cells, it is suggested that the uptake of polycations into the host cells would play a crucial role in the intermalization of retroviruses.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.2
• /
• pp.69-79
• /
• 2004

To correctly simulate performance characteristics of fuel cells with a modeling method, various physical and chemical phenomena must be considered in fuel cells. In this study, performance characteristics of planar solid oxide fuel cells were simulated by a commercial CFD code, CFD-ACE+. Through simultaneous considerations for mass transfer, heat transfer and charge movement according to electrochemical reactions in the 3-dimensional planar SOFC unit stack, we could successfully predict performance characteristics of solid oxide fuel cells under operation for structural and progress variables. In other words, we solved mass fraction distribution of reactants and products for diffusion and movement, and investigated qualitative and quantitative analysis for performance characteristics in the SOFC unit stack through internal temperature distribution and polarization curve for electrical characteristics. Through this study, we could effectively predict performance characteristics with variables in the unit stack of planar SOFCs and present systematic approach for SOFCs under operation by computer simulation.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.99-105
• /
• 2005

In this study, the $PPy/CLO_4$ and PPy/PVS composite electrodes were prepared at various polymerization potential by incorporating electrolyte anions of different anion size during constant potential polymerization. The reulting Polypyrrole surfaces were inspected by SEM, and their electrochemical Properties were investigated with CV and ac impedance method. The results of electrochemical analysis were suggested that anion for $PPy/CLO_4$ electrode and cation fir PPy/PVS electrode were transferred during redox reaction. As constant potential of polymerization was increased, the charge transfer resistance of $PPy/CLO_4$ and PPy/PVS was decreased and the electric double layer capacitances of $PPy/CLO_4$ was higher than that of PPy/PVS. The change of PPy/PVS surface was relatively smaller than that of $PPy/CLO_4$ according to electropolymerization potential.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.486-492
• /
• 2005

Into a no-conjugated polymer chain we have introduced side chains with a styrene-linked triphenylamine segment as a $\pi-electron$ donor, styrene-]inked aminobenzaldehyde segment as a tunable reactive -CHO group, and PM (4-(dicyanomethylene)-2-(tert-butyl)-4H-pyran) moiety as a $\pi-electron$ acceptor for red emitting materials. The thermal stability and the optical properties of the statistical copolymers have been studied. All the polymers were electrochemically active and showed electroluminescent emission at around 700nm. The EL device of P5-PM based on the sturcture of $ITO/PPV/polymer/BCP/Alq_3/Al$ showed a maximum brightness of $120cd/m^2\;at\;50mA/cm^2$ with an external quantum efficiency of $0.67\%$. It was possible to enhance the external quantum efficiency by balancing the charge recombination. A red-emitting polymer with high external quantum efficiency was developed by incorporating bifunctionality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.165-165
• /
• 2013

희토류 발광 물질은 4f 껍질에 위치하는 전자의 독특한 특성 때문에 발광 소자와 디스플레이에 그 응용성을 확장하고 있다. 본 연구에서는 고효율의 적색과 주황색 형광체를 합성하기 위하여 모체 격자 CaNb2O6에 희토류 이온인 유로퓸과 사마륨을 치환 고용하여 최적의 합성 조건을 조사하였다. Ca1-1.5xNb2O6:REx3+ (RE=Eu, Sm) 형광체 분말 시료는 고상반응법을 사용하여 활성제 이온인 Eu3+와 Sm3+의 농도비를 0, 0.01, 0.05, 0.10, 0.15, 0.20 mol 로 변화시키면서 합성하였다. 초기 물질 CaO, Nb2O5, Eu2O3와 Sm2O3을 화학 적량으로 측정하고, 400 rpm의 속도로 24시간 밀링 작업을 수행한 후에, 건조기 $60^{\circ}C$에서 28시간 건조하고, 시료를 막자 사발에서 갈아 세라믹 도가니에 담아 튜브형 전기로에서 분당 $5^{\circ}C$의 비율로 승온시켜 $500^{\circ}C$에서 5시간 동안 하소와 $1,100^{\circ}C$에서 6시간 소결하여 합성하였다. Eu3+가 도핑된 경우에, 발광 스펙트럼은 Eu3+ 이온의 농도비에 관계없이 강한 적색 발광 스펙트럼이 616 nm에서 관측되었다. 이외에도, 596 nm와 708 nm에서 상대적으로 발광 세기가 약한 주황색 발광과 적색 발광 신호가 검출되었으며, 541 nm에서는 매우 약한 녹색스펙트럼이 관측되었다. Eu3+ 이온의 농도비에 0.01 mol에서 0.15 mol로 증가함에 따라 주발광 신호의 세기는 점점 증가하였으며, 0.15 mol에서 최대 발광 세기를 나타내었다. Eu3+ 이온의 농도비가 0.20 mol 로 더욱 증가함에 따라 주 피크의 세기는 농도 소강 현상에 의하여 현저히 감소함을 보였다. 한편, 주된 흡광 스펙트럼은 279 nm에서 나타났는데, 이것은 전하전달밴드 신호이다. Sm3+가 도핑된 형광체 분말의 발광 스펙트럼은 모든 시료의 경우에 613 nm에서 강한 적주황색 발광 스펙트럼이 관측되었고, 상대적으로 세기가 약한 570 nm와 660 nm에 피크를 갖는 황색과 적색 발광 스펙트럼이 발생하였다. 흡광과 발광 스펙트럼의 최대 세기는 0.05 mol에서 나타났으며, Sm3+ 이온의 농도비가 더욱 증가함에 따라 흡광과 발광 세기는 급격하게 감소하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.72.1-72.1
• /
• 2013

광촉매 활용 기술은 수질 및 대기 중의 난분해성 오염 물질 처리 등의 환경 분야에서부터 항균 및 초친수성 기능을 활용한 소재 분야, 그리고 태양광을 이용한 물분해 수소 제조 및 이산화탄소의 전환 등의 인공 광합성 연구 분야까지 그 응용분야가 대단히 넓은 기술이다. 본 강연에서는 이러한 광촉매의 반응 원리와 대표적인 응용분야인 환경 정화 분야 및 에너지 분야에서의 광촉매 기술의 활용, 그리고 현재 광촉매 관련 연구 분야의 주요 관심사 및 미래 성장을 위한 과제 등을 포괄적으로 다루고자 한다. 광촉매 반응은 반도체의 따간격 에너지 흡수에 따라 전자와 정공(+전하를 가진 전자와 같은 거동을 하는 입자)가 발생한 뒤에 일어나는 계면에서의 전자전달 반응을 기초한다. 발생한 정공과 전자는 각각 산화와 환원 반응을 유발하며 이러한 산화, 환원반응을 통해 다양한 분야로의 응용이 가능하다. 환경 정화 분야의 경우, 정공이 물 혹은 공기 속에 존재하는 수분과 반응하여 생성되는 OH 라디칼 ($OH{\cdot}$)의 강력한 산화력을 주로 이용하게 된다. OH 라디칼에 의한 다양한 난분해성 유기물질의 산화분해 반응을 활용하여 고도처리공정이 가능하게 되며, 수계 난분해성 유기오염물질의 제거뿐만 아니라 대기 중에 존재하는 VOCs, 악취물질 등의 분해도 가능하며, 아울러 바이러스나 박테리아와 같은 세균을 제거할 수 있는 것으로 알려져 있다. 한편, 물 분해 수소제조 및 이산화탄소의 전환과 같은 에너지 분야 응용의 경우, 전도대의 전자를 활용한 환원반응에 기초한다. 앞서 언급한 다양한 응용분야에서 활용될 수 있는 광촉매의 종류 또한 매우 다양하며, 이사화티탄(TiO2)는 대표적인 고효율 상용 광촉매이다. 아울러, 원하는 응용 분야에서의 광활성이 높은 새로운 광촉매의 제조 및 평가가 꾸준히 진행되고 있으며, 그 가운데 태양광의 가장 많은 영역을 차지하고 있는 가시광 활성을 갖는 광촉매 개발에 관한 연구가 활발히 수행되고 있다. 이에, 현재까지 개발된 다양한 가시광 광촉매 시스템에 대한 소개 및 각 광촉매 응용분야에서 최근 새롭게 대두되고 있는 이슈들에 대하여 중점적으로 고찰하고자 한다.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.615-618
• /
• 2011

Carbon nanotubes (CNTs) draw attention as promising materials due to their excellent electrical and mechanical properties. However, the intrinsic strong interaction between CNTs presents a challenge to their use in various applications. Here, we present a facile method to disperse single-walled carbon nanotubes (SWCNTs) in a polar solution using a graft copolymer, poly(vinyl chloride)-graft-poly(oxyethylene methacrylate), PVC-g-POEM. The graft copolymer was synthesized via atom transfer radical polymerization (ATRP), as confirmed by gel permeation chromatography (GPC) and $^1H$ NMR spectroscopy. The SWCNTs were uniformly dispersed in a polar solvent such as dimethylsiloxane (DMSO) using PVC-g-POEM as a dispersant, due to interaction between CNT and the graft copolymer, as revealed by transmission electron microscopy (TEM) analysis. Upon removal of the solvent, free standing nanocomposite films with good homogeneity were obtained.