• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.63-70
• /
• 2009

The purpose of this paper is to propose a CSMA/CA protocol to reduce the delay time and increase the throughput of the original CSMA/CA protocol. In underwater environments, the efficiency of the protocol is reduced due to the increase of the propagation delay time, which results in increase of the collision possibility causing lowering of the transmission efficiency Considering this propagation delay, this paper propose to insert the STANDBY frame in a CTS packet in order to avoid the TimeOut status of the CSMA/CA protocol. According to the simulated test results, proposed protocol is increased about 20% throughput than original CSMA/CA protocol. And the more value of propagation per transmission delay 'a' is low, the more throughput of protocol is better.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.3
• /
• pp.470-477
• /
• 2001

Constant ΔK fatigue crack growth tests were performed by applying an intermediate multiple overload for S45C steel. The purpose of the present study is to investigate effects of specimen thickness at various baseline stress intensity factor range levels (ΔK(sub)b), overload application position (a/W) and overload application frequency (OL(sub)HZ) on fatigue crack growth retardation behavior. The principal results are summarized as follows. The amount of retardation for a given ΔK(sub)b level is increased with increasing the baseline stress intensity factor range level for all specimen thickness. The normalized minimum crack growth rate is increased with increasing the specimen thickness, except for ΔK=45MPa√m. The retardation cycle is decreased with increasing a/W and increased with OL(sub)HZ.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.55-60
• /
• 2000

Constant ${\Delta}K$ fatigue crack growth tests were performed applying an intermediate multiple overload for SM45C steel. The purpose of the present study is to investigate the effects of specimen thickness at various baseline stress intensity levels$({\Delta}K_b)$, overload application frequency(a/W) and overload application frequency$(OL_{HZ})$ on fatigue crack growth retardation behavior. The principal results are summarized as follows. The amount of retardation for a given ${\Delta}K_b$ level is increased with increasing the baseline stress intensity level in all specimen thickness. The normalized minimum crack growth rate is increased with increasing the specimen thickness, except for ${\Delta}K=45MPa \sqrt m$. The retardation cycle is decreased with increasing the overload application position and increased with the overload application frequency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1104-1111
• /
• 2012

Airborne tactical networks is used to air-to-air or air-to-ground operation and have a large propagation delay. All nodes share the data by using TDMA-based broadcasting. In airborne tactical networks, each time slot needs the guard time to ensure the broadcasting because the collisions occur due to the large propagation delay. However, the channel utilization of the networks can be greatly degraded due to the waste of guard time. In this paper, we propose Inter-Transmitter Distance-Based TDMA (ID-TDMA) scheme which ensures the broadcasting while improving the channel utilization by reducing the guard time with the inter-transmitter distance information. The proposed scheme shows the effectiveness through the performance evaluation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.515-519
• /
• 2021

IEEE 1588 PTP is a precision time protocol in which two systems synchronize without the aid of GPS by exchanging packets including transmission/reception time information. In the time synchronization process, the propagation delay time can be calculated and the distance between the two systems can be measured using this. In this paper, we proposed a method to improve the distance measurement precision less than the modulation symbol period using the timing error information extracted from the preamble of the received packet. Computer simulations show that the distance measurement precision is proportional to the length of the preamble PN sequence and the signal-to-noise ratio.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.386-391
• /
• 2019

This paper presents analysis results for the effect of the directional group delay of the antenna to implement a precision radio navigation system. The analysis was conducted through antenna simulation and test, and the test was performed in an anechoic chamber. The directional group delay of the antenna was calculated in phase-based analysis method. The results showed that a variation of up to 7.7ns in group delay occurred per antenna direction. The group delay variation from the analysis is 2.31 meters when converted into distance. It was tested using a real radio navigation system based on the time of arrival (TOA). The test verified the distance variation of 2.1 meters, and this value is similar to those obtained from the simulation and chamber test analysis.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.103-107
• /
• 2003

현재 관측점간의 3차원 상대위치를 구하고 기준점의 측지학적 좌표ㆍ표고를 결정하는 작업을 수행하는 GPS(Global Positioning System) 측량은 신호가 전파인 관계로 대기권의 전파지연 오차를 포함하게 되며, 전리층 지연은 주파수에 반비례하는 특성이 있으므로 지역의 대소에 구분 없이 이주파수 수신기(dual-frequency GPS receiver)를 사용하여 정확하게 지연시간을 측정하고 그로 인한 측위정밀도의 정확성을 확보하고 있다. 본 연구는 비교적 낮은 가격인 일주파 수신기를 사용하여 기선거리별로 삼각점을 선점한 후 동일 시간에 관측을 실시하고 취득한 데이터 값을 추출한 후 기선거리에 따른 허용오차를 분석하고, 그 활용성 및 경제성과 일주파 수신기의 기선에 대한 사용 가능성을 분석하였다. 그 결과, 100km이내의 지역에서는 일주파 수신기 만으로도 충분히 만족스러운 결과를 얻을 수 있었다.

• Electrical & Electronic Materials
• /
• v.6 no.2
• /
• pp.109-114
• /
• 1993

본 논문에서는 0.05Pb(Sn$_{1}$2/Sb$_{1}$2/)-0.35PbTiO$_{3}$-0.60PbZrO $_{3}$+0.4[wt%] MnO$_{2}$ 조성을 갖는 3성분계 압전세라믹스에 Cr$_{2}$O$_{3}$ 의 첨가량을 변화시켜서 지연선을 제작하고 탄성표면파를 여기시켜 전파속도를 측정하였으며 EMMAS 기준에 따라 각 시편의 재료정수를 측정하고 이를 압전방정식에 적용하여 매질에 따라 여기되는 탄성표면파의 계산속도를 이론적으로 산출한 후 이를 지연선에서 측정된 실험속도와 비교하여 재료의 특성이 탄성표면파의 전파특성에 미치는 영향을 조사하였다. 그 결과 SAW 지연선에서 측정된 탄성표면파는 Generalized Rayleigh Wave였으며 재료의 특성이 우수한 시편일 수록 계산속도와 측정속도와의 차가 적었던 것으로 나타났고 오차한도는 평균 99.39[%]였으므로 실험속도 측정방법이 feed through 현상없이 우수한 측정방법이었음을 알 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.12
• /
• pp.2004-2010
• /
• 2003

Fracture life and crack retardation behavior were examined experimentally using CT specimens of aluminum alloy 5083. Crack retardation life and fracture life were a wide difference. between 0.8 and 0.6 in proportion to ratio of load reduction. The wheeler model retardation parameter was used successfully to predict crack growth behavior. By using a crack propagation rule, prediction of fracture life can be evaluated quantitatively. A statistical approach based on Weibull distribution was applied to the test data to evaluate the dispersion in the retardation life and fracture life by the change of load reduction.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.320-321
• /
• 2003

위성통신 및 무선통신에서 안테나의 수신 감도를 향상시키기 위한 노력은 계속되어 왔다. 안테나의 지향성을 높이기 위하여 다수의 동형 단위 안테나들을 일정 방향으로 배열하여 안테나를 기계적으로 회전시키지 않고, 고정된 다수의 동형 단위 안테나들에서 방사되는 전파의 위상을 전자적으로 변화시켜 방사 빔을 주사하는 방법, 즉 위상배열 안테나(Phased Array Antenna)를 널리 사용하고 있다. 위상배열 안테나의 단위 안테나에서 방사되는 전파의 위상을 변화시키기 위해선 실시간 시간지연 시스템이 필요하다. (중략)