• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.416-425
• /
• 2002

In this Paper, It is analysed 5 GHz frequency characteristics that carry out interference experimental under the indoor environments for understanding propagation interference between existing 5 GHz band wireless communication system and 5 GHz band wireless LAN system. The interference signal which was generated by signal generator injected to 5 GHz Wireless LAN communication system measured interference characteristics and This radio propagation main interference factors were classified received power level separation by interference source frequency and interference source frequency pulse period & width separation. It is measured transmission rate according to variable data and packet size for conforming the quality of 5 GHz band wireless LAN system. We measured the packet data loss rate and power level of received signal and analyzed its frequency characteristics effected by interference signal.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.117-122
• /
• 2017

In a wireless communication system, increasing the channel capacity with a limited frequency is a problem in all frequency bands. Increasing the frequency bandwidth and increasing the output can increase the channel capacity, but sometimes the communication is not possible due to interference noise. If the radio frequency allocation is set to world standardization such as WRC or ITU-R, each country has strict control over regulations. This is because one wireless communication system should not affect other systems. We present the results of a study on scenarios and analysis of radio waves to be installed inside and outside the aircraft without interfering with the wireless LAN.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.6
• /
• pp.1-8
• /
• 2012

An experimental study has been conducted to scrutinize into the influence of ultrasonic standing wave on the propagating behavior and structural stabilization of propane/air premixed flame at various equivalence ratios in half-open rectangular duct. Evolutionary features of the flame fronts are caught by high-speed images, and the variation of flame structure and local flame velocities along the propagation are analyzed. It is revealed that the propagation velocity agitated by the ultrasonic standing wave is greater than that without the agitation: the velocity enhancement diminishes as the equivalence ratio approaches the stoichiometric. Influence of standing wave on the flame overwhelms that of the buoyancy which slants the flame front towards top of the duct, and thus the standing wave contributes to the structural stabilization of propane/air premixed flame.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.103-109
• /
• 2005

Fiber reinforced plastic material should be inspected in fabrication process in order to enhance quality by prevent defects such as delamination and void. Generally, ultrasonic technique is widely used to evaluate FRP. In conventional ultrasonic techniques, transducer should be contacted on FRP. However, conventional contacting method could not be applied in fabrication process and novel non-contact evaluating technique was required. Laser-based ultrasonic technique was tried to evaluate CFRP plate. Laser-based ultrasonic waves propagated on CFRP were received with various transducers such as accelerometer and AE sensor in order to evaluate the properties of waves due to the variation of frequency. Velocities of laser-based ultrasonic waves were evaluated for various fiber orientation. In addition, laser interferometry was used to receive ultrasonic wave in CFRP and frequency was analysed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1631-1636
• /
• 2015

With the advance of wireless communication technology in terrestrial area, underwater communication is also evolving very fast from a simple point-to-point transmission to an elaborate networked communications. Underwater acoustic channel has quite different features comparing with the terrestrial radio channel in terms of propagation delay, Doppler shift, multipath, and path loss. Thus, existing technologies developed for terrestrial communication might not work properly in underwater channel. Especially medium access control (MAC) protocols which highly depend on propagation phenomenon should be newly designed for underwater network. CSMA/CA has drawn lots of attention as a candidate of underwater MAC protocol, since it is able to resolve a packet collision and the hidden node problem. However, a received signal could be degraded by the interferences from the nodes locating outside the receiver's propagation radius. In this paper, we study the effects of interference on the CSMA/CA based underwater network. We derived the SNR with the interference using the sonar equation and analyzed the degradation of the RTS/CTS effects. These results are compared with the terrestrial results to understand the differences. Finally we summarized the design considerations in CSMA/CA based underwater network.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1245-1258
• /
• 2023

To efficiently manage forest resources, it is essential to deploy multiple unmanned aerial vehicles equipped with various sensors simultaneously. Consequently, the ground control station antenna should not only maintain continuous tracking of the target station but also minimize the impact of radio interference on other unmanned aerial vehicle stations. In this paper, we presented beam forming techniques based on the VPR algorithm within a ground control station constructed using a phased array antenna system. Through simulation experiments in diverse unmanned aerial vehicle operating environments, it was demonstrated that the presented method enables not only the continuous tracking of operational unmanned aerial vehicles but also the suppression of radio interference by establishing a continuous pattern null for multiple operational radio interference sources.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1344-1349
• /
• 2012

The Korean DGPS station transmits the 200 bps GPS enhancement signal using the MSK modulation in frequency range of 283.5 kHz to 325 kHz. The land-based stations of 6 sites provide the service area of 80 km with the output power of 500 W. The ocean-based stations of 11 sites provide the output power of 300 W, which provide the DGPS service to 185 kM. Some places are serviced from two or three DGPS stations. The interferences among the DGPS stations using the high power can be occurred. Also, the performances of the user terminasl in dual service area can be degraded. In this paper, the protection ratios for the DGPS service are defined. Using the MF wave propagation model, the interferences among the DGPS stations and the adjacent wireless ground stations are analyzed. Also, the performances of DGPS user terminals are analyzed in the viewpoint of interference.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1401-1402
• /
• 2008

UHF 대역의 RFID는 기존의 13.56MHz의 RFID에 비해 인식 범위가 넓어 다양한 응용 서비스를 가능하게 하는 장점을 제공하는 반면, 900MHz대 이동(Cellular) 통신과 같은 이종 무선통신과의 간섭과 멀티 리더 환경에서의 리더간 간섭의 충돌이 발생하기 때문에 시스템 성능에 제약을 받는다. 더욱이 국내의 경우 모바일 RFID의 이용이 활성화되면 현재의 협소한 주파수 대역내에서 기존의 서비스인 고정형 및 이동형 RFID가 동시 운용할 경우 리더간 간섭으로 인하여 안정적인 서비스 제공이 곤란하게 된다. 따라서 본 논문에서는 국내 UHF대역 RFID 서비스 환경에서의 전파 간섭 분석 및 효율적인 채널 운용 방안을 제시 하였다. 시뮬레이션 환경의 정확도를 높이기 위하여 MATLAB과 ADS를 연동하여 본 논문의 제안된 방안을 입증하였고, 후리의 공식을 이용해 경로손실을 모델링 하였다.

• The Journal of the Korea Contents Association
• /
• v.9 no.3
• /
• pp.58-71
• /
• 2009

Today is the Information age which Internet service acts a most important Information Source. So A Power Line Communication has been achieved to offer Internet service for Last-Mile area. And Research is achieved to frequence range from 30MHz to 80MHz for High-speed communication service. But, Power Line is not suitable for communication, so, electric wave is generated from flow of communication information. And the electric wave is interfered with Wireless Communication Service using the same frequence range. In this paper, we calculated a 3 steps and 8 steps dynamic Notch Filter to consider the bandwidth of interference signals based on ETSI standard for reduce of interference between Power Line Communication and Wireless Communication Service. And we applied a Notch Filter and verified the application performance from Spectrum and BER.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1952-1962
• /
• 1998

Radio interference ahs been occurred in TRS service on the south seashore in Korea from 1994. After monitoring the radio signal interference, it is found that the main reasons of radio interference are due to the source stations located at Fukuoka and Yamaguchi in Japan. However, Japan didn't agree about this fact, based on the their technique evaluationof the radio signal; since the distance (about 240-300km) of the radio station between Fukuoka and Pusan is enough to separate from the interference, the radio signal from Digital Mobile Phone is Japan cannot be reached to Pusan area in Korea. In this paper, we verified that the main sources of radio interference are a ducting propagation generated from Japan area by using the computer simulation technique and the measuring data.