• 한국세라믹학회지
• /
• 제29권4호
• /
• pp.293-297
• /
• 1992

A proper combination of complex permeability and permittivity is necessary to produce the zero-reflection microwave absorber with an impedance matching. Increasing of dielectric permittivity and development of an impedance matching was investigated in ferrite-rubber composite specimens by addition of conducting materials. Graphite powder of high dielectric constant was added to the composite specimens to increase the permittivity. The precise estimation of graphite content to produce the matched-wave-impedance absorber at a given frequency can be made by using the numerically derived solution map of impedance matching. It was suggested that permittivity adjustment is an effective technique to obtained the microwave absorber with both good absorbing properties and small thickness as well.

• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.823-828
• /
• 1993

The performance of ferrite composite microwave absorber has been evaluated as the matching frequency, the matching thickness and the band width. Especially, matching frequency is very important in application of microwave absorber because it determines operating frequency range. In this study, the ferrite composite microwave absorbers consisted Ni-Zn ferrite and Zn2Y ferroxplana were prepared in order to control matching frequency. Then, the variation of the material constants and microwave absorbing characteristics were investigated with various ferrite mixing ratio. The material constants of ferrite composite microwave absorber could be controlled by variation ferrite mixing ratio. Therefore, it was confirm that matching frequency of microwave absorber could be shifted by control of material constants.

• 한국전자파학회지:전자파기술
• /
• 제4권2호
• /
• pp.11-16
• /
• 1993

A design method for the electromagnetic wave absorber with the attenuation over 20 dB at a frequency was formulated. In addition to the matching boundary which is determined by the theoretical equation, several limiting conditions due to the fabrication process were examined. Based on the study on the effects of the variance of the thickness and permittivity on the electromagnetic wave absorbing characteristics, a mean to exclude such effects was also included in the proposed design method. The ranges of variables were limited as the frequency of 9.45 GHz and .epsilon.' = 5 ~ 30, when the effect of .epsilon. " was not considered.

• 한국항해학회지
• /
• 제15권1호
• /
• pp.1-9
• /
• 1991

The coaxial sample holder with 20mm in diameter and the adaptor from type N connector-to-20mm${\phi}$ coaxial tube are designed and manufactured which have been used for designing and measuring the fabricated microwave absorber. In addition, the measure in method of material constants of the microwave absorbers is described, which is focused on minimizing the error due to the sample's shapes, the fitting conditions, etc. After describing the design method of a single-layed microwave absorber, the microwave absorbers for X-band, C-band and S-band RADARs are designed and fabricated, respectively, which are composed of ferrite, carborn, and binder and have good performance. Futhermore, we develop the high performance microwave absorber in extremely wide-band type for RADAR, which is composed of different material and its mixing ratio and which could cover nearly from 4 to 10 GHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 1993

In this paper, the permeability(${\mu}$$\sub$r′/, ${\mu}$$\sub$r"/), permittivity($\varepsilon$$\sub$r′/, $\varepsilon$$\sub$r"/) and absorption properties of Ferroxplana/Rubber composites were investigated. The composite specimens were prepared by molding and curing the mixtures of matrix rubber and Ni$_2$Y ferroxplana powders which were synthesized by coprecipitated method. The permeability(${\mu}$$\sub$r′/) of specimen was decreased in the range of 8∼12.5(GHz) and the permeability(${\mu}$$\sub$r"/) and Permittivity($\varepsilon$$\sub$r′/, $\varepsilon$$\sub$r"/) were increased. The optimum thickness of electromagnetic wave absorber (F/R=4, 1,200($^{\circ}C$) ), utilizing the Smith chart, was about 3.0(mm). The Figure of Merit was 93(%).

• 전자공학회논문지A
• /
• 제28A권11호
• /
• pp.874-879
• /
• 1991

The effect of air gap between specimen and jig on the material constant (permittivity, permeability) and attenuation characteristics of electromagnetic wave absorbers in the coaxial line method was investigated. The presence of a air gap made both permittivity and permeability measured lower than true value, and the tendency was greater in the case of permittivity. An inner gap compared to an outer gop was found to yield a larger difference between measured and true values. The effect of air gap was measured for a Ni0.3Zn0.7Fe2O4, with the gap eliminated by metallizing with Ag-paste. The measured characteristics were in good agreement with corrected values by calculation.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.67-68
• /
• 2005

This thesis is concerned with basic research for development of EM wave absorbers in sheet type for mobile phones. By controlling the sendust ratio, the $Al(OH)_3$ coating, the thickness, the kind of binders, EM wave absorbers were prepared and examined. Centeral frequency shifts toward lower with increasing thickness of the absorber, and absorption ability controlled to adjust Sendust amount. The absorption band of the EM wave absorber coated with $Al(OH)_3$ becomes larger than that of non-coated one. Sendust composite microwave absorbers mixed with CPE were prepared at $70^{\circ}C$ in temperature. The fabricated EM wave absorbers show a reflection coefficient 5.56 dB at 1.8 GHz in thickness of 0.85 mm.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.423-428
• /
• 2005

We prepared paint-type and sheet-type EM wave absorbers with Mn-Zn Ferrite, Ni-Zn Ferrite, Ba Ferrite, Sr Ferrite, and Sendust against ghosts of a mater in ships. To prepare the absorbers, enamel paint and epoxy paint were used as binders. The prepared EM wave absorber's absorption properties were investigated. The prepared EM wave absorbers have 6 dB over in 2 GHz ${\sim}$ 4 GHz. We compared properties of wave absorption between paint-type and spray-type

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.429-434
• /
• 2005

In this paper, we investigated EM wave absorption property of EM wave absorbers prepared with sendust. The EM wave absorbers have good EM wave absorption properties in 1 GHz ${\sim}$ 3 GHz. On the other hand, the absorption band of the EM wave absorber coated with $Al(OH)_3$ larger than non-coated one. Pulverization effect of sendust on EM wave absorption properties was also investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1478-1480
• /
• 1994

In this paper, the microwave absorption properties of two layered absorber were evaluated. The two layer absorber were composed of Ni-Zn ferrite/rubber absorber and Ferroxplana/rubber absorber. The most absorption properties condition were obtained when the transforming layer and absorbing layer were Ferroxplana/robber absorber and Ni -Zn ferrite/rubber absorber. respectivity. The optimal thickness of the transforming and the absorbing layer were 4(mm) and 1(mm), respective1y.