• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10C
• /
• pp.995-1006
• /
• 2003

It is well know that in the wireless communication systems the transmitted signals can suffer from multipath fading due to the wave propagation characteristics and the obstacles over the paths, resulting in serious reduction in the power of the received signals. However, it is possible to take advantage of the inherent diversity imposed in the multipath reception if the underlying channel can be properly estimated. One of the diversity reception methods in this case is Rake processing. In this paper we study the Rake receivers for the direct-sequence spread-spectrum communication systems utilizing PN (pseudo noise) sequences to achieve spread spectrum. A conventional Rake receiver can use the finite-duration impulse (FIR) filter followed by the PN sequence demodulator, where the FIR filter coefficients are the reverse-ordered complex conjugate values of the fading channel impulse response estimates. Here, we propose a new Rake processing method by replacing the aforementioned PN code sequence with a new set of optimum demodulator coefficients. More specifically, the concept of the new optimum Rake processing is first introduced and then the optimum demodulator coefficients are theoretically derived. The performance obtained using the new optimum Rake processing is also calculated. The analytical results are verified by computer simulation. As a result, it is shown that the new optimum Rake processing method improves the MSE performance more than 10 dB over the conventional one using the fixed PN sequence demodulator. It is also shown that the new optimum Rake processing method improves the MSE performance about 10 dB over the Adaptive Correlator that performs the combining of the multipath components and PN demodulation concurrently. And finally, the MSE performance of the optimum Rake demodulator is very close to the MSE performance of OPSK demodulator under the AWGN channel.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.06a
• /
• pp.69-73
• /
• 1998

경기도 퇴촌에 위치한 경희대학교 연습림내의 경사도와 수종을 달리하는 3개의 서로 다른 임반에서 등고선을 따라 지표면의 토층분화를 조사하였고 이에 따른 수분침투특성을 조사하였다. 3개의 임반은 낙엽송, 잣나무 및 굴참나무의 천연활엽수로 구성되었고 이에 구성 수종에 따라 지표면에 퇴적되는 O, A, B층의 깊이를 달리한다. 토층분화 길이는 3개 임반 모두 경사도가 낮은 하부사면에서 양호하게 발달하였으며 경사도가 높은 산사면이나 수간우가 많은 일부 지역에서는 유거수에 의해 유기물이나 표층토가 유실되어 바로 암반층 또는 풍화층이 나타나는 경향을 보이고 있다. 그러나 잣나무 임반의 경우 밀식 수간에 의해 유기물퇴적층과 A층의 발달이 다른 낙엽송이나 굴참나무 임반보다 토층 발달 깊이가 약 2배 이상으로 깊게 발달되었다. 그리고 조사된 임반의 하부사면의 경우 A층의 발달이 약 35cm부터 약 60cm에 이르고 있으나 토성을 구성하는 요소 중 직경 2mm 이상의 자갈에 토양입자들이 전체 토양의 40%정도를 차지하고 있다. 이러한 토층분화 특성을 달리하는 임반에서의 수분 이동특성은 퇴적된 유기물의 두께가 깊으면 깊을수록 수분침투율은 낮아지는 반면 포면 유거수량은 증가하는 경향을 보여주고 있다. 그리고 지표면, 유기물 퇴적층 아래, 지표면으로부터 30cm 아래에 설치된 Lysimeter를 이용하여 조사된 침출수의 분포는 전체를 100으로 환산시 지표면은 약 55%, 유기물퇴적층 아래는 30%, 그라고 30cm의 위치에서는 나머지 15%정도의 침출수가 포집되었다. 따라서 본 실험의 결과를 살펴보았을 때 지표 층에 존재하는 유기물이 전체 수분이동에 영향을 미치는 것으로 조사되었다.양 실험 결과, 서식지에서 조사된 결과인 잎과 줄기에서 Pb$\alpha$ 추정시에는 SeaWiFS 위성과 관련된 global algorithms 중에서 490nm와 555nm의 복합밴드를 포함하는 OC2 알고리즘(ocean color chlorophyll 2 algorithm)을 사용하는 것이 OC2 series 및 OC4 알고리즘보다 좋은 추정 값을 도출할 수 있을 것으로 기대된다.환경에서는 5일에서 7월에 주로 이 충체의 유충이 발육되고 전파되는 것으로 추측되었다.러 가지 방법들을 적극 적용하여 금후 검토해볼 필요가 있을 것이다.잡은 전혀 삭과가 형성되지 않았다. 이 결과는 종간 교잡종을 자방친으로 하고 그 자방친의 화분친을 사용할 때만 교잡이 이루어지고 있음을 나타내고 있다. 따라서 여교잡을 통한 종간잡종 품종육성 활용방안을 금후 적극 확대 검토해야 할 것이다하였다.함을 보이고 있다.X> , ZnCl$_{3}$$^{-}$같은

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.63-76
• /
• 2005

Wood-culture is new paradigm which is substituted for the cement culture, and the study of wood-culture should keep pace with not only the study of a engineering science but also a sociological study to form a theory system. The purpose of this study is to suggest the method of sociological approach of the wood culture which have not yet tried at home and abroad; in view of structural-functionalism, systemical-functionalism, conflict theory, social-change theory by analyzing cases in Korea. In view of structural-functionalism, social system consists of cognition system, institution system, life system and technology system. These sub-systems fulfill the function of what-should-be, reasonability, reality and development. In view of systemical-functionalism, according to the acknowledgment and spreading proccess of the wood usefulness, wood culture system consists of the individual system, organizational system and the social system. In view of conflict theory, the society which has the wood culture can be classified into three types. The one is society which the traditional wood culture is declining and the cement culture is spreading. The other one is society which the cement culture is declining and the traditional wood culture is spreading. Another is Finally the society which the two type balance with. In view of social-change theory, the society can be classified into three types. The one is society which the wood culture is proceeding to the cement culture. The other is society which the cement culture is proceeding to the wood culture. Another is society which the wood culture changes itself. Finally, from a view of changing level, the society can be classified into three types: the micro-change, the middle-level-change, and the macro-change. It's need to study wood culture systemically in view of engineering and sociological science. And then it will be possible to make 'wood culture theory system'.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.165-170
• /
• 2014

Shear horizontal (SH) waves propagate as a type of plate wave in a thin sheet. The dispersion characteristics of SH waves can be used for signal analysis. Therefore, SH-waves are useful for monitoring the structural health of a thin-sheet-structure. An electromagnetic acoustic transducer (EMAT), which is a non-contact ultrasonic transducer, can generate SH-waves easily by varying the shape and array of magnets and coils. Therefore, an EMAT can be applied to an automated ultrasonic testing system for structural health monitoring. When used as a sensor, however, the EMAT has a weakness in that electromagnetic interference (EMI) noise can occur easily in the automated system because of motors and electric devices. Alternatively, a fiber optic sensor works well in the same environment with EMI noise because it uses a light signal instead of an electric signal. In this paper, a fiber Fabry-P$\acute{e}$rot interferometer (FFPI) was proposed as a sensor to receive the SH-waves generated by an EMAT. A simple test was performed to verify the performance of the FFPI sensor. It is thus shown that the FFPI can receive SH-wave signals clearly.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.4
• /
• pp.444-452
• /
• 2019

Carbapenem resistance, mediated by the major acquired metallo-β-lactamase (MBL) genes, has been increasingly reported, particularly for clinical isolates of Acinetobacter spp. Of the 191 nonduplicate clinical isolates of the carbapenem-nonsusceptible Acinetobacter spp. evaluated, 125 isolates (65.4%) were positive for the modified imipenem or meropenem-Hodge test, and 49 isolates (25.7%) were positive for the imipenem-EDTA+SMA double disk synergy test (DDS). PCR and sequencing of the bla_VIM-2-allele and bla_IMP-1-allele showed that 29 A. baumannii isolates and 1 A. calcoaceticus isolate had bla_VIM-2, whereas 16 A. baumannii isolates and 2 A. calcoaceticus isolates had bla_IMP-6; 1 isolate of the A. genomospecies 3 had bla_VIM-2 and bla_AIM-1. All the above MBL genes belong to class 1 integron. The size of class 1 integron encompassing bla_VIM-2 or bla_IMP-6 ranges from 2.8 kb to 3.2 kb in clinical isolates of A. baumannii, and 3.2 kb to 3.5 kb in clinical isolates of A. genomospecies 3. bla_VIM-2 was most often located first or second in the class 1 integron, and these integrons often included aacA4. Due to dispersion of the MBL-producing Acinetobacter spp. as well as integron, which may encompass various resistance genes, there is an expectation for the increase of multidrug resistant Gram-negative bacteria, including resistance of carbapenems such as imipenem or meropenem. Hence, the development of new antimicrobial agents for treating severe Acinetobacter spp. infections is needed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.3
• /
• pp.250-257
• /
• 1993

The Global Positioning System(GPS) is a worldwide radio navigation system based on satellite technology. Signal availability and accuracy of GPS are subject to change due to an incomplete constellation and operational test activities. In order to analyze the signal availability and accuracy of GPS, we made an experiment on this system in Kunsan during April 6, 7, 9, 10, 1992. The results obtained are summarized as follows: 1. It was possible to avail the GPS system almost 24 hours per day, but sometimes it was impossible to obtain the GPS signal 2 or 3 times per day and its total time was at the most an hour. 2. By using satellite almanac, we also could calculate PDOP(HDOP) and forecast signal availability. And the mean positional error was $37.9{\sim}73.6m$ and standard deviation was $37.4{\sim}133.1m$. The positional error almost coincided with PDOP(HDOP). 3. The mean positional error of 3D was less than that of 2D. And the altitude error in 3D was about $56{\sim}74m$ and its standard deviation was about $65{\sim}93m$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.879-886
• /
• 2008

This paper addresses the analysis and the design optimization of differential interconnects for Low-Voltage Differential Signaling (LVDS) applications. Thanks to the differential transmission and the low voltage swing, LVDS offers high data rates and improved noise immunity with significantly reduced power consumption in data communications, high-resolution display, and flat panel display. We present an improved model and new equations to reduce impedance mismatch and signal degradation in cascaded interconnects using optimization of interconnect design parameters such as trace width, trace height and trace space in differential flexible printed circuit board (FPCB) transmission lines. We have carried out frequency-domain full-wave electromagnetic simulations, time-domain transient simulations, and S-parameter simulations to evaluate the high-frequency characteristics of the differential FPCB interconnects. The 10% change in trace width produced change of approximately 6% and 5.6% in differential impedance for trace thickness of $17.5{\mu}m$ and $35{\mu}m$, respectively. The change in the trace space showed a little change. We believe that the proposed approach is very helpful to optimize high-speed differential FPCB interconnects for LVDS applications.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.303-316
• /
• 2005

Strong radar returns were observed in oyster sea farms, and coherent interferometric pairs were successfully constructed. Tide height in coastal area is possible to be measured by using interferometric phase and intensity of SAR data. This SAR application technique for measuring the tide height in the near coastal zone can be further improved when applied to double bounce dominant areas. In this paper, we investigate the characteristics of polarimetric signature in the oyster farm structures. Laboratory experiments were carried out using Ku-band according to the target scale. Radar returns from vertical poles are stronger than those from horizontal Pole by 10.5 dB. Single bounce components were as strong as double bounce components and more sensitive to antenna look direction. Double bounce components show quasi-linear relation with the height of vertical poles, which implies double bounce is more useful to determine water level than total power. A L-band NASA/IPL airborne SAR (AIRSAR) image was classified into single-, double-bounce, and volume scattering components. It is observed that oyster farms are not always characterized by double bounced scattering. Double bounce is a main scattering mechanism in oyster farms standing above seawater, while single bounce is stronger than double bounce when bottom tidal flats are exposed to air. Ratios of the normalized single to double bounce components in the former and latter cases were 0.46 and 5.62, respectively. It is necessary to use double bounce dominant sea farms for tide height measurement by DInSAR technique.

• Trans-
• /
• v.8
• /
• pp.1-28
• /
• 2020

This study examines musical characteristics of so-called 'Hongdae Sound' as a historic musical trend by comparing with 'US 8^th Army Sound' and British 'London Punk'. Hongdae Sound refers to the musical trend that was formed with independent bands and musicians who mostly performed live in the club called 'Drug' in Hongdae area, and voluntarily adopted minor musical sensitivity and indie spirit of 'post-punk rock' genre. But as an industrial standpoint the superficial identity of 'indie' interferes with academic approach when analysing musical aspects of Hongdae Sound. Therefore it is necessary to rearrange its characteristics as the musical trend based on regional classification in order to fully appreciate its status in history of Korean popular music. US 8^th Army Sound refers to the musical trend that was played within the live stages in US military bases in Korea. Many hired Korean musicians for those shows were able to learn the current popular musical trend in the States, and to spread those to the general public outside the bases. The industrial system of the Army Sound was very similar to that of K-Pop, but when it comes to leading the newest musical trend of 'rock-n-roll', it had more resemblance to that of Hongdae Sound. London punk was the back-to-basic form of pure rock that was armed with social angst and rebel, indie spirit. Its primal motto was 'do-it-yourself', and Hongdae Sound mostly followed its industrial, musical and spiritual paths. London punk was short-lived because it abandoned its indie spirits and became absorbed to the mainstream. But Hongdae sound maintain its longevity by maintaining the spirit and truthfulness of indie, while endlessly experimenting with new trends.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.141-146
• /
• 2019

Economic analysis predicts that the drone market will grow, and the growth of the toy and hobby drone market is expected to gradually expand. Drone expectations are rising due to the net economic function of drone market growth, but accidents due to improper management and operations are also increasing. The difference in toy drone performance is incomparably small compared to industrial drone performance, but the ordinary buyer can not know whether the difference can cause an accident during use. The toy drones used in this study were obtained from KC and CE certification, and 20 kinds of drones were used. The flight time ranged from a minimum of 3 minutes to a maximum of 12 minutes, and the control distance ranged from a minimum of 20m to a maximum of 380m. Therefore, it is necessary to secure product safety through sampling inspection of the radio wave output of toy drones, and it is also necessary to mount an algorithm that automatically lowers the altitude or hover when exceeding the limit flight distance. For future research, we will build data to establish toy drone safety standards through a altitude testing and impact testing of toy drone.