• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.601-602
• /
• 2013

경로손실 예측 모델은 무선 네트워크 설계를 위한 기본 척도이며, 적용 환경과 적용 시스템에 영향을 받는 특징이 있다. 대부분의 기존 연구는 도심, 교외와 같은 육상 환경을 기반으로 한다. 일반적으로 해수면 경로 손실은 전파의 잦은 굴절로 인해 지표면 보다 크며, 주파수에 비례한 경로손실이 있다고 알려져 있다. 하지만 해상 환경의 관련 연구는 자유공간에 적용하기 때문에 예측 모델의 정확성을 낮춘다. 본 논문은 해상 무선통신 서비스를 위한 2.4 GHz 대역의 해수면 경로손실 예측 모델을 제안한다. 이를 위해 육상과 해상에서 각각 수신신호 세기를 측정하고, 다양한 예측 모델과 비교 분석하여 실용성과 정확성을 입증한다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.106-112
• /
• 2001

Unfortunately, the area without economical efficiency, especially the far distance sea, is much lower than that of a urban area-built-up area. It should be promoted the equivalent level to a urban area in the light of future-oriented universal service. Actually, Because propagation environment of mobile communication in the sea is greatly different from that for inland focused on built-up area, a propagation prediction model in the sea should be distinguished from inland-based one. Accordingly, the purpose of this study is to suggest the propagation prediction model for the sea service as a method to minimize unnecessary facilities investment and maintenance caused by additional or new building of a base station. If mobile phone service for far distance sea is provided by expanding limited communication zone of narrow band CDMA mobile communication whose spread band FA is 1.2288MHz. Suggested propagation prediction model includes five parameters to minimize facilities investment of a base station and maximize channel capacity: equivalent line of sight, chip delay by PN code, antenna altitude, power of base station and gain of antennas. Finally, suggested propagation prediction model is simulated and, the results are examined for its utility by comparing with loss of free space.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.697-708
• /
• 2016

As the needs for fast wireless communication technology in various fields, including companies, individuals, etc., grows, many research projects related to the coverage of propagation are being carried out for plaining optimized communication services. On the other hand, there are some limitations in surveying and analyzing propagation in highland areas. To provide a better communication service of a new service, a range of radio environment conditions based on a wide radio bandwidth (selection of propagation model, correction of value in accordance with radio bandwidth, etc.) should be considered. In particular, radio environment conditions are becoming increasingly sophisticated. By the early detection of real-time changes in the radio spectrum, which is based on an examination and research of regional occupied band width condition, proper measures should be established. To make a proper solution of above, the basic real-time analysis of spectrum distribution status by regional groups is necessary. In addition, the establishment of prompt measures should be enable by stored or analyzed radio data. In an attempt to predict reliable propagation coverage, this thesis examines the limited propagation data with HTZ Warfare, which were collected from domestic high land sites faced with limited access. Furthermore, a comparative result value evaluation for an optimized propagation model was performed through testing simulations, and frequency-dependent and propagation model-dependent analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3B
• /
• pp.297-304
• /
• 2011

MIMO wireless communication embedded systems, and for propagation prediction for indoor and outdoor propagation prediction program incorporates an indoor/outdoor propagation through the simulator can be predicted. This analysis technique developed by the interference between multiple transmitters and a maximum transmission distance issues, the frequency utilization efficiency for a variety of issues, including analysis and prediction becomes possible. Development of the prediction of the conventional methods, but I can consider the environmental characteristics of the ray tracing simulation software to develop and implement an efficient ray tracing, ray tracing techniques and are designed to enable tracked beam analysis of propagation characteristics using information technology by combining the theoretical characteristics of an efficient and well-reflected propagation prediction technique was employed. The frequency of domestic embedded systems, ensure the frequency characteristics and frequency of 3-5GHz band for propagation to investigate the development of local wireless communication technology-based skills needed for securing and jeonpaganseopdeung frequency management techniques to ensure the verification and verified through experiments.

• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.63-69
• /
• 2008

The characteristics of the spread of a forest fire are generally related to the attributes of combustibles, geographical features, and meteorological conditions, such as wind conditions. The most common methodology used to create a prediction model for the spread of forest fires, based on the numerical analysis of the development stages of a forest fire, is an analysis of heat energy transmission by the stage of heat transmission. When a forest fire breaks out, the analysis of the transmission velocity of heat energy is quantifiable by the spread velocity of flame movement through a physical and chemical analysis at every stage of the fire development from flame production and heat transmission to its termination. In this study, the formula used for the 1-D surface forest fire behavior prediction model, derived from a numerical analysis of the surface flame spread rate of solid combustibles, is introduced. The formula for the 1-D surface forest fire behavior prediction model is the estimated equation of the flame spread velocity, depending on the condition of wind velocity on the ground. Experimental and theoretical equations on flame duration, flame height, flame temperature, ignition temperature of surface fuels, etc., has been applied to the device of this formula. As a result of a comparison between the ROS(rate of spread) from this formula and ROSs from various equations of other models or experimental values, a trend suggesting an increasing curved line of the exponent function under 3m/s or less wind velocity condition was identified. As a result of a comparison between experimental values and numerically analyzed values for fallen pine tree leaves, the flame spread velocity reveals a prediction of an approximately 10% upward tendency under wind velocity conditions of 1 to 2m/s, and of an approximately 20% downward tendency under those of 3m/s.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.726-731
• /
• 2002

The purpose of this paper is to analyze the path loss for the mobile cellular system. The maximum distance is 150 km and the area is about 6,000 $\textrm{km}^2$ and the field test was performed for the total 5 base stations. The path loss was calculated by Hata and Okumura models, respectively. As a result, it was shown that a proper model for the field test data is the middle one between the rural model and suburban/rural Hata model.

• Journal of Environmental Impact Assessment
• /
• v.26 no.1
• /
• pp.11-26
• /
• 2017

Approximate empirical equations obtained by measuring overall noise levels at different distances have been used to evaluate environmental influence of the railway noise though the accurate prediction of noise levels is important. In this paper, a noise prediction model considering the frequency characteristics of noise sources and propagation was suggested to improve the accuracy of noise prediction. The railway noise source was assorted into track, wheel, traction and aerodynamic components and they were characterized with the source strength and speed coefficient at each octave-band frequency. Correction terms for the acoustic roughness and the track/bridge condition were introduced. The sound attenuation from a source to a receiver was calculated taking account of the geometrical divergence, atmospheric absorption, ground effect, diffraction at obstacles and directivity of source by applying ISO 9613-2. For obtaining the source strength and speed coefficients, the results of rolling noise model, numerical analysis and measurements of pass-by noise were analyzed. We compared the predicted and measured noise levels in various vehicles and tracks, and verified the accuracy of the present model. It is found that the present model gives less error than the conventional one, so that it can be applied to make the accurate prediction of railway noise effect and establish its countermeasures efficiently.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.104-104
• /
• 2021

연안에 발생하는 지진해일은 많은 인명 및 재산 피해를 유발할 수 있다. 이에 따라 주요 선진국은 자국의 피해 뿐 아니라 세계 주요도시에 거주하는 자국민의 안전과 대피에 대한 경보발령을 목적으로 전지구 지진해일 시스템을 구축하여 상시 운영중에 있다. 우리나라의 지진해일 예측시스템은 지진해일의 발생과 전파, 그리고 전세계 주요 연안에 도달할 때의 해일고 모의 등에서 우수한 성과를 보이는 것으로 인정되고 있으나, 실제적인 위험경보를 발령하기 위해서 필요한 해일도달 시 조위와의 상호작용에 대한 기능은 현재 없는 상태이다. 해일에 의한 주된 피해는 연안으로의 범람에 대한 것으로 이를 파악하기 위해서는 해일 도달 당시의 조위를 예측하고 해일과 조석과의 상호작용을 반영한 예측시스템 구축이 필요하다. 이에 따라 본 연구에서는 현재 사용되고 있는 지진해일 예측모델에서 조석-지진해일 상호작용을 고려하기 위해 조석과 지진해일을 동시에 모의할 수 있는 예측 알고리즘을 제시한다. 지진해일의 전파 및 범람에 조석이 상당한 영향을 미칠 수 있음은 관련 연구자들에 의해 꾸준히 지적되어왔으나 과거 연구는 이상적인 지형이나 조석 조건에 대해서만 일부 이루어졌으며, 아직까지 실제 조석을 활용한 충분한 연구는 미흡한 실정이다. 향후 실제 조석에 의한 지진해일의 변화를 모의하기 위해 지진해일 예측모델에서 실제 조석과 조류 조건에서 지진해일을 동시에 모의할 수 있도록 예측 알고리즘을 개발하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.765-770
• /
• 1995

지체균열전파(DHC)는 중수로 압력관의 수명에 근 영향을 미치는 중요한 현상 중의 하나이다. 본 연구에서는 열처리를 통하여 압력관 재료인 Zr-2,5Nb의 기계적 성질, 집합조직을 변화시켜 각 인자들이 DHC에 미치는 영향을 조사하였다. 그 결과 지체균열전파속도(DHCV)는 항복강도와 경도와 비례한다는 것과 유사한 미세구조와 집합조직을 갖는 Zr-2.5Nb의 경우 항복강도와 Puls의 모델을 이용하여 지체균열전파속도(DHCV)를 예측할 수 있었다. 그리고 secondary cracking이 annealing한 시편들에서는 관찰되었으나 $\beta$열처리 후 급냉한 시편에서는 관찰되지 않았다. 이것의 수소화물 형상의 차이에 의한 것으로 생각된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.51-59
• /
• 2003

A method of autonomous update is presented for onboard orbit propagator. On board propagator is an alternative means that could be used for navigation purpose in case of CPS receiver's failure. Although the ground station is not a able to upload a new propagator, the onboard propagator must be maintained most up-to-date. For this, a filtering technique is proposed wherein GPS data are effectively used to continuously update the on board propagator which was uploaded previously. Even if the ground station has generated the on board propagator based on the wrong information, the onboard propagator with updating scheme can automatically correct the errors in the coefficients of residual reconstruction function. Several scenarios were used to show the validity of the scheme for updating the onboard propagator using KOMPSAT-1 orbit data.