• Korean Journal of Veterinary Pathology
• /
• v.2 no.2
• /
• pp.127-138
• /
• 1998

Transmissible venereal tumor(TVT) is a naturally occurring contagious neoplasm which can be transmitted by mechanical contact during mating in dogs and transplanted as intact viable cells to dogs and other members of canine family such as coyotes, jackals, wolves, and foxes. The incidence of this tumors tends to increase in Korean native Jindo dogs. This is probably due to the high density and unrestrained management system. With time, TVT reaches the maximum size and then tends to regress spontaneously unless individuals are immunologically compromised. It consists of different types of cells depending on the stage. In this study, 10 tumors were selected from Jindo dogs. These were histologically calssified into three stages; progressive, steady-state, and regressive. Mitotic figures were counted, and their histological appearance at each stage is compared with their DNA ploidy. Histologically, 5 tumor cases were calssed as the progressors, 3 cases as the steady-state tumors, and 2 cases as regressors. Progressors were composed of round cells with large nuclei containing conspicuous nucleoli and frequent mitotic figures. A few spindle-shaped cells and inflammatory cells including mainly lymphocytes, a few neutrophils and macrophages were also seen. In the steady-state tumors, there was an increased number of spindle shaped cells and mitotic figures were rare. Six tumors were diploid and four were aneuploid with the variation coefficient of 7.02. Two of five progressive tumors were aneuploid. Two of three steady-state tumors were aneuploid while both tumors at the regressive stage were diploid. Progressive and steady-state tumors had a much larger S/G2M fraction and a higher mitotic index than regressive tumors. Two tumors which persisted for more than one year were aneuploid. These results suggest that the progressive and steady-state tumors had more active cell division than the regressive neoplasms.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.237-246
• /
• 1999

A finite element model is studied to simulate unsteady free surface flow based on dynamic wave equation and collocation method. The collocation method is used in conjunction with Hermite polynomials, and resulting matrix equations are solved by skyline method. The model is verified by applying to hydraulic jump, nonlinear disturbance propagation and dam-break flow in a horizontal frictionless channel. The computed results are compared with those by Bubnov-Galerkin and Petrov-Galerkin methods. It is also applied to the North Han River to simulate the floodwave propagation. The computed results have good agreements with those of DWOPER model in terms of discharge hydrographs. The suggested model has proven to be one of the promising scheme for simulating the gradually and rapidly varied unsteady flow in open channels.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.6
• /
• pp.349-356
• /
• 2013

The purpose of this study is to review and overcome the limits of the existing design wave model applied to such waters as those located inside bays or near islands where the impact of wind influenced waves are more dominant, due to the nature of topographic isolation, than the influence of direct waves coming from the open sea. Although the existing model for an inside bay design wave is excellent for considering wind factors and very adaptable to topographically complicated areas compared to other models, it is difficult to show the wave diffractions and reflections caused by large scale structures or topographic features in the region. The study examined the various methods capable of taking into account wave diffraction, the angle of wave reflection, and changes in water depth. As a result of applying the modified design wave model to the target situation (inside bay or near island areas), it was found that the reliability of the design wave height around marine structures was improved, compared to the existing models. Therefore, it is fair to predict that the new model could provide more accurate design waves in the design of marine structures.

• Explosives and Blasting
• /
• v.22 no.4
• /
• pp.7-15
• /
• 2004

An explosion modeling technique was developed by using the spherical discrete element code, PFC3D, which can be used to model the dynamic stress wave propagation phenomenon. The modeling technique is simply based on an idea that the explosion pressure should be applied to a PFC3D particle assembly not in the form of an external force (body force), but in the form of a contact force (surface force). According to this concept, the explosion pressure is applied to the wall particles by the scheme of radius expansion/contraction of inner-hole particles. The output wall force is compared to the input hole pressure in every time step, and a correction routine is activated to control the radius multiplier of the inner-hole particles. A comparative blast simulation far a cement mortar block of $80\times90\times80mm$ was conducted by using the conventional explosion modeling method and the new one. The results of the simulation are presented in a qualitative fashion.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.515-523
• /
• 2012

In this paper, the resonance characteristics and radiation characteristics of a spherical patch on a dielectric sphere are analyzed. Resonance characteristics can be obtained from the resonant frequency and the quality factor. Radiation characteristics can be also analyzed from the E-field in the far region. In order to calculate these parameters, spectral domain analysis method is applied. Algebraic equation can be obtained in spectral domain through Vector Legendre transform pair and Galerkin's method. So, efficient calculation is possible numerically. It is investigated that radius, curvature of a spherical patch, and dielectric constant of a dielectric sphere have an effect on characteristics of a spherical patch.

• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.280-285
• /
• 2008

Two kinds of failure model, that is, the Gurson model and a shear failure model were used for the finite element analyses of simple and notch tensile specimens and axial compression of a fracture tube with initial saw-cuts. The parameter values for the shear failure model were determined by a combined experimental and numerical analysis of the notch tensile specimens. After fitting the numerical parameters such as the yielding stress and the fracture shear strains, the Gurson model and the shear failure model were applied to the analysis of the fracture tube. Although the Gurson model and the shear failure model showed similar fracture behavior for the case of the tensile specimens, the respective results were different in the axial force and the crack growth rate of the fracture tube. That is, the shear failure model required more axial force to make the cracks propagate along the tube than the Gurson model. These are believed to show the lack of damage evolution process of the shear failure model. To decide which model is better in the tube analysis, experimental verification will be necessary.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.703-713
• /
• 2002

Recently, an improved EFG(Element-Free Galerkin) crack analysis technique, which includes a discontinuous approximation and a singular basis function on the auxiliary supports, was developed. The technique is able to accurately analyze the crack propagation problem without any modification of the analysis model; however, it shows some dependency on the analysis parameters used. In this study, the effect of analysis parameters such as the size of compact support, dilation parameter, the smoothness of shape function around the crack tip, and the number of node using auxiliary supports on the accuracy of solution has been investigated. Through a patch test with a crack, relative L₂ error norm of stresses and the stress intensity factor were computed and compared for various analysis parameters and the results were presented as guidelines for adequate choice of analysis parameters.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.36-41
• /
• 2003

This experimental study shows the combustion characteristics for each coating thickness of water and oil paint which are used as fire retardant paints that prevent fire propagation through cables in underground culverts and trays. To evaluate combustion characteristics, smoke density(ASTM E 662) and Limited Oxygen Index(ASTM D 2863) experiment method was used. As the results of this study, the combustion characteristics of fire retardant paints produced the following : (a) The molt suitable coating thickness of fire retardant paint was 1.5∼2.0 mm in water paint and 0.2 mm in oil paint. (b) Flaming method in experiments of smoke density were found to be higher than Non-flaming method. (c) Water paint has the fire retardant effect and characteristics better than oil paint in measurement results of smoke density and oxygen index. (d) The oxygen index of water and oil fire retardant was able to know that it was satisfied a standard (30 or above).

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.34-39
• /
• 2010

Due to big demand for satellite and communication service using personal handheld terminals, demand for satellites with huge antennas is increasing correspondingly. While such large antennas are realized by various types of deployable antennas, the reflecting surface is made by many facets irrespective of deploying mechanisms. In order to analyze the faceted-reflector more accurately, an existing ray-tracing method is improved. The algorithm allows the rays to cross each other, which is the main characteristic of the faceted-reflector, and takes unevenness of amplitude and phase over the aperture plane into consideration. For the study of the effect of facet configuration, facet generating algorithm is devised. From the analysis algorithm and the facet-generating algorithm, it has been found that the number of facets in a radial direction affects both directivity and sidelobe level. On the other hand, the number of facets in a circumferential direction affects sidelobe level only.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.425-430
• /
• 2015

This paper is a study to improve the classification efficiency of rotating objects by using deep neural networks to which a deep learning algorithm was applied. For the classification experiment of rotating objects, COIL-20 is used as data and total 3 types of classifiers are compared and analyzed. 3 types of classifiers used in the study include PCA classifier to derive a feature value while reducing the dimension of data by using Principal Component Analysis and classify by using euclidean distance, MLP classifier of the way of reducing the error energy by using error back-propagation algorithm and finally, deep learning applied DBN classifier of the way of increasing the probability of observing learning data through pre-training and reducing the error energy through fine-tuning. In order to identify the structure-specific error rate of the deep neural networks, the experiment is carried out while changing the number of hidden layers and number of hidden neurons. The classifier using DBN showed the lowest error rate. Its structure of deep neural networks with 2 hidden layers showed a high recognition rate by moving parameters to a location helpful for recognition.