Journal of the Korean Society for Precision Engineering
/
v.21
no.5
/
pp.14-18
/
2004
스페클 간섭계는 빛을 이용하는 측정 방법이므로 비접촉/원격 측정 방법이며, 빛의 파장의 수십-수백 분의 1 정도의 정밀도로 측정이 가능하고, 레이저가 조사되는 영역 전체의 동시 측정이 가능하다는 장점을 가지고 있다 특히 최근에는 전자, 영상, 컴퓨터 기술의 발달에 힘입어 ESPI(Electronic Speckle Pattern interferometer; 전자 스페클 상관 간섭계) 장치가 많은 발전을 이루었고, 이에 따라 산업 현장에서의 활용도 계속 늘고 있다. (중략)
Journal of the Korean Society for Precision Engineering
/
v.17
no.6
/
pp.40-45
/
2000
교정은 모든 측정분야에서 어렵고 까다로운 주제인데, 특히 정전센서, 레이저간섭계, AFM, STM 등을 포함하는 나노메트롤로지(nanometrology : 나노측정) 분야에서는 그러하다. 나노측정에서는 전체 측정범위가 센서들의 한계분해능 값과 비슷한데, 이러한 측정에서 높은 소급성을 유지하기는 매우 어렵기 때문이다.(중략)
Transactions of the Korean Society of Mechanical Engineers
/
v.18
no.9
/
pp.2358-2367
/
1994
This paper presents techniques for evaluation and compensation of total measuring errors in a commercial CMM. The probe errors as well as the machine geometric errors are assessed from probing of the mechanical artefacts such as shpere, step, and rings. For the error compensation, the integrated volumetric error equations are considered, including the probe error adn the machine geometric error. The error compensation is performed on the absolute scale coordinate system, in order to overcome the redundant degree of freedom in the CMM with multi-axis probe. A interface box and corresponding software driver are developed for data intercepting/correction between the machine controller and machine, thus the volumetric errors can be compensated in real time with minimum interference to the operating software and hardware of a commercial CMM. The developed system applied to a practical CMM installed on the shop floor, and demonstrated its performance.
Proceedings of the Korean Society of Precision Engineering Conference
/
2001.10a
/
pp.154-158
/
2001
산업이 고도화, 대형화됨에 따라 조선, 건설, 기계산업문야에서 대용량 힘 측정의 필요성이 날로 증가하고 있다. 힘 측정에 사용되는 힘 센서는 국가 힘 표준인 힘 표준기로부터 교정을 받아 사용함으로써 힘 측정 결과에 대해 국제적으로 인정받을 수 있다. 본 연구에서는 build-up 힘 표준기에 사용되는 build-up 힘센서를 설계 및 제작하고 힘 센서 각각의 특성과 build-up 시스템 전체의 특성을 실험하여 build-up 힘 센서의 오차를 평가하였다.
우리나라에는 조선 태조와 숙종대에 돌에 새겨 만든 두 개의 천상열차분야지도(天象列次分野之圖)가 남아 전하고 있다. 숙종본 천문도는 태조본을 다시 복각한 것으로 알려져 있으며 천문도의 구성은 태조본의 뒷면과 같은 모습이다. 국보 228호로 지정된 태조본 천문도는 오랜 시간의 흐름에 따른 표면 마모로 명문이나 별자리 확인이 쉽지 않다. 특히, 태조본 뒷면은 심한 훼손으로 별의 크기 뿐 아니라 대부분의 별자리 확인도 어려운 상황이다. 지금까지 천문도 표면의 훼손으로 인해 태조본의 앞 뒷면과 숙종본에 새겨진 별의 위치와 크기를 정량적으로 비교하기가 어려웠다. 본 연구에서는 숙종본 천문도의 별자리와 함께 태조본의 앞뒷면 천문도의 별의 위치 및 크기를 정량적으로 비교하기 위해 2008년과 2009년에 걸쳐 태조본 석각 천문도를 3차원 정밀 측정하였다. 천문도 측정은 삼각측량과 간섭효과를 활용한 3차원 스캐너인 Breukmann을 사용하였으며 0.1mm 이내의 측정 정밀도로 측정하였다. 3차원 정밀 측정 자료는 유물 훼손을 대비한 복원 자료구축, 복제품 제작을 위한 기초자료 그리고 별자리 연구를 위한 천문자료 등으로 활용할 수 있다. 우리는 3차원 측정을 통해 석각 천문도의 전체 형태뿐 아니라 모든 별의 위치와 크기의 측정 자료를 DB화 하였으며, 이를 이용해 태조본의 앞 뒷면과 숙종본에 새겨진 별의 위치와 크기를 비교하고 각각의 특성을 조사하였다. 또한 천문도에 새겨진 별의 크기와 실제 별의 밝기와의 상관관계를 알아보았다.
An, Jongho;Pak, Soojong;Kim, Sanghyuk;Park, Woojin;Jeong, Byeongjoon
The Bulletin of The Korean Astronomical Society
/
v.41
no.1
/
pp.73.3-74
/
2016
본 연구에서는 비구면 반사경의 형상오차를 3가지 방법으로 측정, 비교하였다. 실험에 사용한 포물면 반사경의 구경은 108 mm, 유효초점거리는 444.5 mm 이다. 첫 번째로 접촉식 형상측정방식인 FTS(Form TalySurf)를 이용하여 표면 거칠기와 반사경의 최적 곡률 반경(BestFitt Radius) 값을 측정하였다. 두 번째로는 비접촉식 형상측정방식인 UA3P(Ultrahigh Accurate 3-D Profilometer)를 이용하여 반사경의 형상 정밀도를 측정하였다. UA3P를 이용할 경우 반사경의 전체 형상을 측정할 수 있다. 세번째로 Shark-Hartmann 센서를 이용한 광학측정방법으로 반사경의 형상 정밀도를 측정하였다. 측정에 필요한 레이저 광학계는 레이저, 콜리메이터, 핀홀, 카메라 렌즈 및 비구면 광학계를 이용하여 설계하였다. 본 연구에서 도출한 각 측정 방법의 신뢰도를 바탕으로 간섭계 사용에 제약이 있는 자유형상곡면의 반사경 표면의 형상오차 측정에 적용할 계획이다.
Proceedings of the Korean Society of Precision Engineering Conference
/
2004.05a
/
pp.295-295
/
2004
본 연구에서는 한국인 20대 남자 50명(23$\pm$2세)과 여자 50명(20$\pm$1세)의 MR 뇌 영상을 KAIST 뇌과학 연구센터에 있는 37 MRI 기기로 획득하였고 Brain Voyager(B/V)를 이용하여 소뇌의 부피를 측정하고자 한다. 남자와 여자의 뇌의 구조가 부분적으로 차이가 있다는 것은 이미 밝혀진 사실이다 남자의 전체적인 brain volume이 약 10% 크다는 사실도 잘 알려져 있다. 그러므로 본 연구에서도 성별에 따라 소뇌의 부피의 차이가 있는지도 검증하고자 한다.(중략)
The The contactless railway abrasion measurement system have to satisfy two conditions to increase the measurement accuracy as follows. The laser region projected on the rail have to be extracted without the geometrical distortion. The mapping of the acquired laser region data on the rail profile have to be matched with the cross section of rail, exactly. But, the conventional railway abrasion measurement system is required the post image processing with a camera model and a perspective transform for the exact mapping between the cross section of rail and the coordinate data extracted from a line laser region or the raw image obtained from a camera because the image captured from the camera has an oblique viewpoint. So, the measured rail profile data had limits to the measurement accuracy because of a discontinuity point. In this Paper, we propose the 3D rail profile reconstruction method to increase the accuracy of the railway abrasion measurement system applying the modified camera model and perspective transform to the image obtained from the bidirectional rail.
The Journal of Korean Institute of Communications and Information Sciences
/
v.32
no.3A
/
pp.319-323
/
2007
In this paper, the automatic precision measurement of RF voltage has been done using the power and impedance standards [1] in the frequency range of 50 to 1000 MHz. A coaxial microcalorimeter and an automatic network analyzer were used for the determination of the RF-DC differences and the total uncertainty is about 1.0 %. A HP computer, a commodore computer and IEEE-488 interface bus were used for measuring the effective efficiency of thermistor mount and the RF-DC difference of thermal voltage converter, All processes of measurement were accomplished by self-developed program automatically.
Proceedings of the Korean Society for Noise and Vibration Engineering Conference
/
1995.04a
/
pp.233-239
/
1995
정밀장비의 내진 및 방진설계에 대한 일반적인 procedure를 제시하고 이를 정밀제어 장비인 HDD CELL에 적용하였다. 정밀장비의 내진 설계를 위해서 는 정확한 진동 허용규제치와 정밀장비가 설치되는 구조물의 진동 환경에 대한 데이터를 확보하는 것이 우선적으로 해야할 일이다. 구조물의 진동은 직접 측정을 하거나 설계 자료를 이용하는 것이 가능하지만 진동 허용규제치는 장비 제작사에서 진동환경시험을 통하여 얻어진 자료를 사용 자에게 제시하는 것이 일반적인 과정이다. 그러나 고도의 정밀성을 요하는 장비 전체를 가진 테이블에 설치하여 진동환경시험을 수행하는 일은 시간과 경제적인 측면에서 유익하지 못하다. 그러한 면에서 본 논문에 제시한 진동 허용가진력 규제치를 이용한 정밀장비의 내진 및 방진의 정량적인 설계뿐만 아니라 진동 허용규제치를 손쉽게 구할 수 있다는 점에서 유익하다 하겠다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.