• Title/Summary/Keyword: 전체 차량 모델

Search Result 94, Processing Time 0.042 seconds

Development of a Dynamic Model for Real-Time Simulation of Tracked Vehicle (궤도차량의 실시간 시뮬레이션을 위한 동운동 모델 개발)

  • 안재준;오중석;윤석준
    • Proceedings of the Korea Society for Simulation Conference
    • /
    • 2002.05a
    • /
    • pp.189-195
    • /
    • 2002
  • 궤도차량 운동의 실시간 시뮬레이션을 위해서 실시간 시간제약 조건을 만족하기 위한 모델링을 시도하였다. 단위 블록 열차로 연결된 전체 차체를 질점으로 가정하여 모델을 단순화함으로써 차량 설계 시 사용되는 궤도 차량 모델보다 실시간성을 향상시키고자 하였다. 당 모델에서 궤도차량의 운동은 트랙의 형상에 구속되는데, 차량의 운동 궤적은 궤도의 형상에 의해 결정된다. 단, 매 단위 시간마다에서 궤도 차량의 위치는 뉴턴의 제2법칙으로 결정된다. 본 모델링은 몇 개의 단위 트랙을 설정하여 이들의 조합으로 전체트랙을 설계할 수 있도록 사용자가 임의로 설계한 전체트랙에서 바로 실시간으로 시뮬레이션할 수 있는 특징을 갖는다. 당 궤도차량 운동 모델은 전동차, 철도, 롤러코스터의 궤도 설계 등에 사용될 수 있으며, 주 용도는 롤러코스터 게임 시뮬레이터에서 동 특성을 비교적 엄밀하게 시뮬레이션 하는데 있다.

  • PDF

결함주입기법을 이용한 차량용 고신뢰성 임베디드 시스템의 안전성 검증방안

  • Lee, Dong-U;Ryu, Dae-Hyun;Na, Jong-Hwa
    • Review of KIISC
    • /
    • v.24 no.2
    • /
    • pp.50-55
    • /
    • 2014
  • 자동차 전장제품 활용의 급속한 증가에 대응하기 위하여 자동차 분야에서는 ISO 26262 안전설계절차를 도입하여 차량용 임베디드 시스템의 안전성을 확보하려고 노력하고 있다. ISO 26262는 자동차에서 발생 가능한 비정상상태(abnormal state)를 식별하고 그의 영향을 분석하며 전체 시스템의 안전을 검증하는 것을 목표로 하고 있다. 다양한 종류의 부품이 연동되는 복잡한 시스템의 안전 검증은 결함수목법과 고장모드영향분석법을 활용하는 위험분석법이 보편적으로 사용된다. 결함주입시험은 이러한 위험분석의 기반도구로서 안전성을 향상시키기 위하여 사용된 고장감내 기능의 동작여부 및 그에 따른 시스템의 안전성을 검증하는 목적으로 사용된다. 본 논문에서는 차량용 고신뢰성 임베디드 시스템에서 사용되는 고장감내 메카니즘들의 기능과 안전을 검증하는 방법과 사례를 소개한다. 최근의 복잡한 차량용 임베디드 시스템의 개발은 상위수준의 모델을 개발하여 지정된 위험 및 고장을 초래하는 결함을 시스템에 주입하고 그의 결과를 분석하여 안전을 검증하는 것이 일반적인 방법이다. 개발 목표 차량의 임베디드 시스템 모델을 개발하고, 식별된 결함의 결함모델을 준비한 뒤, 시스템 모델 기반 결함주입 도구를 이용하여 결함주입을 수행하는 시험방법과 그 결과에 대하여 논의한다. 하드웨어는 SystemC 하드웨어 설계언어를 이용하여 개발하고, 소프트웨어를 컴파일하여 실행화일을 확보하여 시험대상인 결함모델을 개발하고 이를 대상으로 결함주입시험에 대해 설명한다.

Model Based Design and Validation of Vehicle Transmission Control Unit (차량용 변속기 제어 장치의 모델기반 설계 및 검증)

  • Jeong, Byeong-Guk;Hwang, Seon-Hwan;Lee, Jae-Seok;Ko, Hee-Young
    • Proceedings of the KIPE Conference
    • /
    • 2015.11a
    • /
    • pp.157-158
    • /
    • 2015
  • 본 논문에서는 Matlab/Simulink와 Renesas사의 프로세서를 이용하여 차량용 변속 제어를 위한 모델기반 시스템을 구현하였다. 차량용 변속 제어를 위한 전체 시스템 모델은 Simulink와 Renesas사의 Real Time Interface(RTI)를 이용하여 구현한 후에 실험을 수행하였다. Matlab과 Renesas 제어보드의 컴파일러가 설계된 변속기 제어 모델의 C-소스 파일과 Object 파일을 자동으로 생성시켜주기 때문에 사용자에 의한 추가적인 프로그램의 Coding 없이 실제 시스템의 시뮬레이션과 실험을 동시에 수행할 수 있다.

  • PDF

Design of an Embedded Integrated Model for Human-Vehicle Interaction (인간-차량 상호작용을 위한 임베디드 기반 통합 모델 설계)

  • Park, Seung Hyeon;Yang, Ji Hyun
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2015.10a
    • /
    • pp.1794-1795
    • /
    • 2015
  • 현재의 자동차는 운전자에게 안정성과 편의성을 제공하기 위해서, 자동차 중심의 인터페이스를 넘어 인간 중심의 인간-차량 인터페이스로 발전함에 따라서 차량의 전체 시스템 설계에 영향을 미치는 새로운 양방향 인터페이스를 필요로 하고 있다. 운전자가 운전함에 있어 사용하고 있는 운전자의 음성, 신체 동작, 생체 신호와 차량의 주행 상태에 대한 종합적이고 체계적으로 관리가 기반이 되는 통합 모델을 통해서 지능화, 복합 체계화된 지능형 자동차를 효율적으로 구현할 수 있는 인간-차량 인터페이스를 제공할 것으로 기대된다.

Analysis of Dynamic Interaction Between Maglev Vehicle and Guideway (자기부상열차/가이드웨이 동적상호작용 해석)

  • Kim, Ki-Jung;Han, Hyung-Suk;Yang, Seok-Jo
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.37 no.12
    • /
    • pp.1559-1565
    • /
    • 2013
  • This study aims to investigate the dynamic interaction characteristics between Maglev vehicles and an elevated guideway. A more detailed model for the dynamic interaction of the vehicle/guideway is proposed. The proposed model incorporates a 3D full vehicle model based on prototyping, flexible guideway by a modal superposition method, and levitation electromagnets including the feedback controller into an integrated model. The proposed model was applied to an urban transit Maglev developed for a commercial application to analyze the dynamic response of the vehicle and guideway, and the effect of the surface roughness of the rail, mid-span guideway deflections, and air gap variations are then investigated from the numerical simulation.

Refinement of Vehicle Cabin Noise by Changing Interior Trims (흡음/차음재 변경에 의한 차실 내부소음 개선)

  • 김재권
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • 1998.06e
    • /
    • pp.107-110
    • /
    • 1998
  • 차량의 주요 소음원부터 실내 탑승자의 귀의 위치까지 도달되는 소음의 전달에 대한 전체적인 경로 및 주파수특성에 대한 해석은 차량의 구조-음향적인 특성이 복잡하므로 매우 어렵다. 그러나, 중-고주파수에 대한 대책에 있어서는 흡차음재가 유용함은 이미 알려진 사실이다. 차실 벽면에 사용된 흡/차음재는 소음레벨에 부분적인 기여를 함은 물론이고 음질에도 영향을 미친다. 소음 레벨에 있어서는 수백 Hz 이하의 저주파수 성분이 주요하며, 음질에는 중-고주파수 대역의 소음특성이 큰 영향을 미친다[1]. 본 논문에서는, 실험적으로 측정된 소음원의 특성을 수치해석 모델에 이용하여 소음레벨 저감과 음질개선을 위한 흡/차음재의 개선방향을 모색하였다.

  • PDF

Characteristics of Heavy Vehicles Using Expressway Networks Based on Weigh-in-motion Data (WIM 데이터를 이용한 고속도로 중차량 특성 분석)

  • Gil, Heungbae;Kang, Sang Gyu
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.33 no.5
    • /
    • pp.1731-1740
    • /
    • 2013
  • The design life and durability of the bridges are strongly affected by the Gross Vehicle Weight(GVW) of heavyweight trucks. The Weigh-In-Motion(WIM) systems are typically used to collect information on truck total weight and speed. The statistical analysis of the GVW measured using High Speed WIM systems showed that most of heavy vehicles were from Vehicle Type 7, 10, and 12. The analysis was also carried out to determine goodness of fit with theoretical probability distributions. The normal distribution was shown to best describe the overall distribution of GVW. The top 10% of the GVW appeared to best fit by the Weibull 3 probability distribution.

A Model for Simplified 3-dimensional Analysis of High-speed Train Vehicle (TGV)-Bridge Interactions (고속철도차량(TGV)-교량 상호작용의 단순화된 3차원 해석모델)

  • 최창근;송명관;양신추
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.13 no.2
    • /
    • pp.165-178
    • /
    • 2000
  • The simplified model for 3-dimensional analysis of vehicle-bridge interactions is presented in this study. By using the analysis model which includes the eccentricity of axle loads and the effect of the torsional forces acting on the bridge, the more accurate analysis results of the behavior of the bridge can be obtained. The equations of kinetic energy, potential energy and damping energy are expressed by degrees of freedom of the vehicle and the bridge. And then by applying Lagrange's equations of motion, the equations of motion of the vehicle and the bridge are obtained. By deriving the equations of forces acting on the bridge considering the vehicle-bridge vertical interactions and also by identifying the position of vehicle as time goes by, mass matrix, stiffness matrix, damping matrix and load vector of vehicle-bridge system are constructed in accordance with the position of vehicles. Then using Newmark's β-method(average acceleration), the equations of motion for the total vehicle bridge system are solved.

  • PDF

Preliminary Study on Automated Path Generation and Tracking Simulation for an Unmanned Combine Harvester (자율주행 콤바인을 위한 포장 자동 경로생성 및 추종 시뮬레이션 기초연구)

  • Jeon, Chan-Woo;Kim, Hak-Jin;Han, XiongZhe;Kim, Jung-Hun
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2017.04a
    • /
    • pp.20-20
    • /
    • 2017
  • 궤도형 차량의 이동구조는 에너지 소비 측면에서 단점이 있지만 접지압의 감소로 인한 평지 및 야지험지에서도 원활한 주행이 가능한 장점으로 인해 농업분야의 플랫폼에서 많이 사용된다. 곡식을 베는 일과 탈곡하는 일을 한 번에 하는 콤바인도 이러한 무한궤도형 이동구조를 사용한다. 또한 궤도형 차량의 방향전환 및 주행속도 변환은 좌 우 궤도의 회전 속도를 다르게 하여 동시에 제어하기 때문에 정교한 주행 성능을 위해서는 궤도형 차량의 기구학 모델을 고려한 경로 계획이 필요하다. 본 연구에서는 직교형 포장에서 Round harvesting 기법 기반으로 궤도형 차량의 기구학 모델 및 포장정보를 고려한 자율주행 콤바인 경로계획 알고리즘을 개발하고자 하였다. 이를 위해 Labview 기반의 궤도형 차량 시뮬레이션을 구축하여 실제 포장정보를 이용해 생성 된 경로의 적용 가능성을 구명하고자 하였다. 자율주행 콤바인 경로 계획은 콤바인의 길이, 너비, 회전 시 좌 우 궤도의 속도 비, 직진 속도와 회전 속도 비, 회전 각도, 포장의 외부 경계선, 작업 겹침 량, 회경 횟수를 이용하여 좌현 새머리 선회를 포함한 내부 왕복작업 경로를 생성하며 외부 회경 횟수는 2~3회를 가정하였다. 자율주행 시뮬레이션은 차체와 궤도 자체의 미끄러짐과 작동기 지연시간을 단순화 한 궤도형 기구학 모델형태로 구성하였다. 추종 알고리즘은 선견 거리법을 사용하였으며, 측면 변이값과 방향 오차의 선형조합을 이용하여 조향변수를 정의하고 퍼지로직기반으로 좌 우 궤도 속도를 7 단계화하여 조향장치를 모델링하였다. 실험결과 개발 된 경로생성 알고리즘은 실제 취득 된 포장 외부 경계 GPS 위 경도를 이용해 자동으로 생성이 가능하며 간략화 된 콤바인 시뮬레이션에서 직진주행 RMS 위치 오차는 0.05 m, 선회구간에서 직진 구간 진입 시 RMS 위치 오차는 0.11 m, 직진 구간 RMSE 방향 오차는 3.2 deg로 콤바인 예취부 간격인 30 cm보다 작은 위치 오차를 보이며 생성된 경로 전체 추종이 가능함을 나타내었다.

  • PDF

Analysis of Vibration Characteristics of a Full Vehicle Model Using Substructure Synthesis Method (부분구조합성법을 이용한 전차량 모델의 진동 특성 분석)

  • Kim, Bum-Suk;Kim, Bong-Soo;Yoo, Hong-Hee
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.34 no.5
    • /
    • pp.519-525
    • /
    • 2010
  • The finite element (FE) method is generally used to model and simulate the physical behavior of large structures, such as passenger vehicles or aircraft. However, FE analysis involves a very large computation time and cost for developing the analysis model. Therefore, the vibration characteristics of large structural systems are often analyzed using the component mode synthesis (CMS) method, which is one of the substructure synthesis methods. In this study, the vibration characteristics of passenger vehicles are analyzed by using the substructure synthesis method. A passenger vehicle model, which includes a vehicle body, suspension systems, and a sub-frame, is presented. The physical components of the vehicle system are modeled as equivalent substructures using the Craig-Bampton method of CMS. The vibration characteristics, such as the natural frequencies and mode shapes and frequency response, of the vehicle system are determined. The effects of variations in some design parameters on the vibration characteristics of the full vehicle model are also investigated.