• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.3
• /
• pp.1-6
• /
• 2000

A simple and compact type of thermoelectric generator was developed as the energy saving system using waste hot water and low temperature waste heat sources. Sixteen of Bi-Te thermoelectric modules were packaged in series for thermoelectric conversion system using hot water as heat source. The thermoelectric generator shows the power output of about 4.5 W with the temperature difference of about 75 K at 40 $\Omega$ and 0.35 A for the electrical resistance and current of the used thermoelectric module, respectively.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.487-494
• /
• 2005

Nowadays a large amount of wastewater containing metal working fluids and cleaning agents is generated during the cleaning process of parts working in various industries of automobile, machine and metal, and electronics etc. In this study, aqueous or semi-aqueous cleaning wastewater contaminated with soluble or nonsoluble oils was treated using ultrafiltration system. And the membrane permeability flux and performance of oil-water separation (or COD removal efficiency) of the ultrafiltration system employing PAN as its membrane material were measured at various operating conditions with change of membrane pore sizes and soil concentrations of wastewater and examined their suitability for wastewater treatment contaminated with soluble or insoluble oil. As a result, in case of wastewater contaminated with soluble oil and aqueous or semi-aqueous cleaning agent, the membrane permeability increased rapidly even though COD removal efficiency was almost constant as 90 or 95％ as the membrane pore size increased from 10 kDa to 100 kDa. However, in case of the wastewater contaminated with nonsoluble oil and aqueous or semi-aqueous cleaning agent, as the membrane pore size increased from 10 kDa to 100 kDa and the soil concentration of wastewater increased, the membrane permeability was reduced rapidly while COD removal efficiency was almost constant. These phenomena explain that since the membrane material is hydrophilic PAN material, it blocks nonsoluble oil and reduces membrane permeability. Thus, it can be concluded that the aqueous or semi-aqueous cleaning solution contaminated with soluble oil can be treated by ultrafiltration system with the membrane of PAN material and its pore size of 100 kDa. Based on these basic experimental results, a pilot plant facility of ultrafiltration system with PAN material and 100 kDa pore size was designed, installed and operated in order to treat and recycle alkaline cleaning solution contaminated with deep drawing oil. As a result of its field application, the ultrafiltration system was able to separate aqueous cleaning solution and soluble oil effectively, and recycle them. Further more, it can increase life span of aqueous cleaning solution 12 times compared with the previous process.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2002.05a
• /
• pp.27-36
• /
• 2002

1995년 이후부터 현재까지 전기로 제강더스트의 재활용 또는 처리에 대하여 국내 및 전 세계의 공개특허 및 연구논문을 분석하여 전기로 더스트의 재활용연구 동향을 파악하고자 하였다. 국내의 경우, 35건의 특허가 공개 또는 등록되었는데, 활용방법에 따라 분류하면 다음과 같다. 고형안정화처리가 6건, 케미칼 제조 7건, 아스콘 채움재가 4건, 토건재료로 활용이 3건, 습식처리 회수가 4건, 용융환원 3건, 폐수처리활용이 2건, 시멘트원료 1건, 건식회수법 5건으로 나눌 수 있다. 또한 년도별로는 95년 2건, 96년 1건, 97년 4건, 98년 4건, 99년 5건, 2000년 18건, 2001년 1건이 출원되었다. 2000년에 전체 출원 건수의 절반이 집중되었다. 미국특허는 이 기간중 39건이 등록된 것으로 검색되었다. 년도별로는 95년 3건, 96년 6건, 97년 5건, 98년 7건, 99년 9건, 00년 2건, 01년 3건, 2002년 4건(2개는 한국출원)이 검색되었다. 처리방법 별로는 마찰재 원료로 활용 3건, 고화처리 3건, 건식장치 1건, 습식처리 13건, 유동환원, 직접환원, 환원배소, 플라즈마환원등의 건식 처리법이 10건, 습식+건식콘크리트 4건, 폐수처리 활용 1건, 건자채 생산 1건등이 등록되었다. 국가전자도서관에서 EAF Dust를 키워드로 1993년 이후의 EAF Dust 관련 연구문헌을 검색한 결과 48건이 검색되었고, 01년에 5건, 00년에 3건, 99년에 4건, 98년 2건, 97년이 가장 활발하여 15건의 보고가 확인되었다. 96년에는 8건, 95년에는 3건의 보고가 검색되었다. 01년의 연구논문들은 direct recycling, reduction kinetics, distillation reduction등에 관심을 보이고 있었다. 가장 활발하게 많은 연구논문이 발표되었던 97년 이후에는 논문 발표수가 현저히 감소되어 97년 이후에 이 분야에 대한 관심이 감소하고 있음을 보여주고 있다.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.107-113
• /
• 2019

Recently, due to global warming, the trend shows an increase in number of lightning strikes which increase risk regarding industry infrastructures. Especially in case where the lightning strikes infrastructures including refinery, petorchemical plant facilities or storage tanks, it can cause power failures, electrical machine malfunction and damage which can lead to fire explosion and multiple calamities. Therefore, detailed case studies must be conducted through a systematic research regarding lightning strike accidents in order to understand its mechanism and devise preventive measures. This paper aims to study cases of explosion regarding waste water storage tanks in refineries and petrochemical plants in order to analyze its root cause and provide preventive measures for avoiding lightning related incidents.

• Resources Recycling
• /
• v.28 no.1
• /
• pp.62-72
• /
• 2019

Generally, $H_2SO_4$ and Cu metal are used as raw materials for producing copper sulfate. The study relates to a method for producing copper sulfate using electrowinning from a waste solution of copper chloride. Uses are used for copper plating for industry, plating, feed, agriculture, electronic grade PCB. Conventional methods for producing copper sulfate have a problem of a large amount of waste water and a high energy cost. A study on the production method of copper sulfate ($CuSO_4$), which is the most used among copper (Cu) compounds, has a low process operation ratio, a small amount of waste water, and a simple manufacturing process. It is easy to remove Na, Ca, Mg, and Al as impurities by using a cationic membrane. At the same time, high purity copper powder could be recovered by an electrowinninng method. Using the recovered copper powder, high purity copper sulfate could be produced.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.3
• /
• pp.228-233
• /
• 2000

This study was carried out to estimate the possibility on the removal of phenols and anilines, which were contained in pulp or dye waste water, and the reusability of plant materials, shepherd's purse and turnip. Most of phenols catalyzed with shepherd's purse were removed more than 90% in the presence of $H_2O_2$, and the removal was ranged from 53.1% for 2,6-DMP to more than 99% for 2,4,6-TCP when turnip was used as catalysts. The removal of anilines catalyzed with shepherd's purse was ranged from 42.2% for 2-CA to 78.7% for 3,4-DCA in the presence of $H_2O_2$, and in case of turnip, from 31.5% for 2-CA to 90.0 % for 2,4-DCA. The reuse of plant materials was proved to be possible for not only the batch method but also the continuous method. No decreasing removal was observed during 30 cycles in waster water contaminated with 100ppm of 2,4-DCP. However, it was observed that the removal was decreased with increasing the number of cycles in higher concentration of 2,4-DCP(800ppm). Therefore, it could be suggested that the number of reusable cycles depends on the initial concentration of substrates.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.1
• /
• pp.69-74
• /
• 2009

In Korea, large amounts of chestnut shell as by-products are produced from food industries. However, most of the by-products exist with no disposal options. Biosorption uses biomass that are either abundant or wastes from industrial operations to remove toxic metals from water. Objective of this research was to evaluate the feasibility of using chestnut shell as by-products for removal of metal ions(Pb, Cu and Cd) from aqueous solution. The chestnut shell was tested for its efficiency for metal removal by adopting batch-type adsorption experiments. The adsorption selectivity of chestnut shell for metals was Pb > Cu > Cd at solution pH 5.5. The Langmuir isotherm adequately described the adsorption of chestnut shell for each metal. Using The maximum adsorption capacity predicted using Langmuir equation was 31.25 mg $g^{-1}$ 7.87 mg $g^{-1}$ and 6.85 mg $g^{-1}$ for Pb, Cu and Cd, respectively. Surface morphology, functional group and existence of metals on chestnut shell surface was confirmed by FT-IR, SEM and EDX analysis. The chestnut shell showed an outstanding removal capability for Pb compared to various adsorbents reported in the literatures. The overall results suggested that chestnut shell might can be used for biosorption of Pb from industrial wastewater.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.29-34
• /
• 2009

This study was performed under four operational conditions for nitrogen removal in metal finishing wastewater. The conditions include electrode gap, reducing agent, the recycling of treated wastewater in 1st step and the simultaneous treatment of nitrate and other materials. Result showed that the removal efficiency of $NO_3{^-}-N$ was highest at the electrode gap of 10 mm. As the electrode gap was shorter than 10 mm, the removal efficiency of $NO_3{^-}-N$ decreased due to increasing in concentration polarization on electrode. And, in case that the electrode gap was longer than 10 mm, the removal efficiency of $NO_3{^-}-N$ increased with an increase in energy consumption. Because hydrogen ions are consumed when nitrate is reduced, reducing reaction of nitrate was effected more in acid solution. As 1.2 excess amount of zinc was injected, the removal efficiency of $NO_3{^-}-N$ increased due to increasing in amount of reaction with nitrate. As the effluent from 1st step in the reactor was recycled into the 1st step, the removal efficiency of $NO_3{^-}-N$ increased. Because the zinc were detached from the cathode and concentration-polarization was decreased due to formation of turbulence in the reactor. The presence of $NH_4{^+}-N$ did not affect the removal efficiency of $NO_3{^-}-N$ but the addition of heavy metal decreased the removal efficiency of $NO_3{^-}-N$. As chlorine is enough in wastewater, the simultaneous treatment of nitrate and ammonia nitrogen may be possible. The problem that heavy metal decrease the removal efficiency of $NO_3{^-}-N$ may be solved by increasing current density or using front step of electrochemical process for heavy metal removal.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1315-1318
• /
• 2003

Wastewater treatment processes are usually located in the outskirts of cities. But these processes should be dealt with continuous maintenance by expert operators. Therefore, in this paper, unmaned and automated control system is designed for the SBR(Sequencing Batch Reactor) plant. This plant is constructed in Gimhae city. Networks and wireless modules are employed for the data transmission. A local controller is in the SBR plant as a client and a monitoring system is located in the other place as a server. Remote control and monitoring system are constructed at the laboratory of ours. Measured data from plant sensors are translated to the remote site using communication modules, and then the data could be displayed and analyzed by means of remote monitoring and control systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.44-44
• /
• 2010

Conventional water treatment facilities like precipitation process need large-scale equipment and wide space to purify the wastewater of paper factory. In case of massive waste water, high gradient magnetic separation (HGMS) parts are more effective to purify it rapidly and to occupy relatively small space, since large voids at filter with HGMS are adopted. Cryo-cooled Nb-Ti superconducting magnet with room temperature bore in diameter of 100 mm and 600 mm in height was used for magnetic separator. Magnetic filters were designed by the analysis of magnetic field distribution at superconducting magnets.