• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1201-1211
• /
• 2014

The purpose of this paper is to present the aperture cut-off filter for reduction of electromagnetic field penetration through a slot in conducting screen. The reduction characteristics of electric field penetration by the aperture cut-off filter are considered. In order to establish the concept of the aperture cut-off filter, the integral equation on the slot aperture field distribution is derived and solved by method of moments, and the reduction characteristics of penetration electric fields for the incident plane wave are calculated. The numerical results showed that the aperture cut-off filter for reduction of electric field penetration through the slot can be realized. To check the validity of the concept of an aperture cut-off filter and the theoretical analysis, the calculated electric field penetration of the metallic wall with narrow slot were compared with the experimental results.

• Proceedings of the Korean Society of Community Living Science Conference
• /
• 2003.05a
• /
• pp.213-216
• /
• 2003

이상의 연구를 통하여 다음과 같은 결과를 얻었다. 첫째, 휴대폰을 포켓에 넣지 않았을 때와 차단가공이 안된 소재에서 전자파 투과량이 0.036-0.05lmW/$ extrm{cm}^2$로 안전기준치 0-0.02mW/$\textrm{cm}^2$ 초과하였으며 전자파 차단 가공 소재를 안감으로 사용하였을 매의 투과량은 0-0.012mW/$\textrm{cm}^2$로 안전기준치 이내의 양이었다. 둘째, 휴대폰 뒷면의 전자파 투과량이 휴대폰 앞면에 비하여 높았다. 셋째, 전자파 차단 가공제로 나켈만을 도포한 소재에서는 투과량이 다소 높았으나 안전기준치를 초과하지는 않았다. 넷째, 총 전자파 투과량은 포켓에 넣지 않았을 때와 가공 처리를 하지 않은 안감의 경우 0.083mW/$\textrm{cm}^2$을 초과하였고 가공처리를 한 경우에 도 0.043mW/$\textrm{cm}^2$을 초과하였다. 이상의 결과로 남성복 안 Pocket에 전자파 차단제 처리를 한 소재의 사용이 바람직할 것으로 생각되어지며, 휴대폰의 뒷면이 인체 바깥으로 향하도록 하는 것이 보다 효과적이라 생각되어진다.

• The Science & Technology
• /
• v.31 no.3 s.346
• /
• pp.90-91
• /
• 1998

각종 전기전자제품들로 발생하는 유해 전자파를 정확한 접지를 통해 100%차단하는 전자파 차단기를 국내서 개발한 (주)엠에스존은 촉망되는 벤쳐기업중의 하나이다. (주)엠에스존은 보이지 않는 전자파를 고객이 눈으로 확인할 수 있도록 차단기와 함께 감지기도 개발했다. 또한 전자파와 수맥의 유해파까지 완벽하게 차단하는 전자파 차단매트(상품명 조아닥터)를 개발 국내는 물론 미국 호주 등지로 수출을 준비하고 있다.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.849-852
• /
• 2006

In this research electromagnetic waves in interception and that do so that keep in step in trend that develop material that draw water by sucking and material that can absorb electromagnetic waves use and do goods anger focus. Character that electromagnetic waves use and make material that can absorb electromagnetic waves to be happened much in portable phone for instance using sticking on hand phone bar Terry part electromagnetic waves intercept wish to. Wish to study character that can conglutinate by evil worldly affairs reason combined us introducing character concept beside function originally electromagnetic waves interception and use region that intercept this time. Because character application process executes question investigation, design preference degree reflects the highest thing and arranged to conclusion.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.35-38
• /
• 2002

Ferrite thin film with glass substrate was prepared by ferrite plating method in order to make sunglass which cut off ultraviolet and electromagnetic field. It has single phase of polycrystalline spinel structure and has gloss like as mirror and has hardness without scratch by scraping with nail. The transmittance of ferrite thin film is lowered near 400nm manifestly, which shows that the ferrite thin film was cut off ultraviolet successfully. Therefore, the sunglass with ferrite plating is use of cut of ultraviolet and electromagnetic field.

• Horticultural Science & Technology
• /
• v.17 no.6
• /
• pp.773-776
• /
• 1999

Effects of cacti and a few indoor plants on the protection of the harmful electromagnetic waves (ELF: extremely low frequency and VLF: very low frequency bands) radiated from the monitor of computer were investigated in indoor condition. The front screen of monitor evoked the highest amounts of electromagnetic waves as compared to other positions. Therefore, plants and other objects were placed on the front or side of monitor in order to measure electromagnetic waves. It was shown that all plants including cacti did not have any effect on the reduction of magnetic waves in both ELF and VLF, regardless of species and varieties, sizes, and dispositions. In the case of electric waves, however, there was a little reduction by cacti, depending upon several treatments mentioned before, but the measured values did not reach below values ruled by TCO (Tjatemannens Central Organization, Swedish Confederation of Professional Employees; electric field: 10 V/m and 1 V/m in ELF and VLF, respectively).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.611-616
• /
• 2018

RFID-based Smart cabinets can make a recognition error owing to the electromagnetic wave interference. This paper proposes and implements a smart cabinet system for inventory management using RFID, especially which can be applied to biological laboratories. We calculate the optimal value of partition distance for the higher recognition rate between RFID tags and the reader, and the optimal partition thickness for electromagnetic wave absorption to achieve the higher recognition rate, in which two kinds of the partitions have been tested, a pure steel partition with various thickness and a thin steel partition attached with electromagnetic waves absorber. The experimental results show that the most recommended partition structure for the smart cabinets is one with the partition distance of 30cm and the partition thickness of 1mm attached with the electromagnetic wave absorption tapes.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.25-29
• /
• 2003

Nickel-ferrite $Ni_xFe_{3-x}O_4$ thin films with several composition for Ni on glass substrate was prepared by ferrite plating method in order to make sunglass which cut off ultraviolet and shield electromagnetic field. It has single phase of polycrystalline spinel structure and has gloss as mirror and has high hardness which is no scratch while scraping by using nail. The transmittance of nickel-ferrite thin film is lowered to zero below 400 nm manifestly. And it shows that the nickel-ferrite thin film in nickel composition rate x = 0.09 was most cut oil ultraviolet when compared with goods of other company in the cut off effect of ultraviolet. Therefore, sunglasses coated with $Ni_xFe_{3-x}O_4$ thin film can be used in removing ultraviolet and electromagnetic field.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.320-327
• /
• 2012

In this paper, a novel ultra wide band(UWB) antenna with tri-band notch capability is proposed. The proposed antenna can reject WiMAX(3.3~3.7 GHz), WLAN IEEE 802.11a/n(5.15~5.825 GHz), and ITU(8.025~8.4 GHz) bands. Band rejection capability is achieved only split ring resonators(SRRs) and complementary SRRs(CSRRs). The SRR under the radiating patch, the CSRR loaded on the radiating patch, and the CSRRs on the ground of the CPW feeding reject the WiMAX, WLAN, and ITU bands, respectively. The simulation and measurement results demonstrate the performances of the proposed antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.170-175
• /
• 2002

The cut-off frequencies of higher order modes in a symmetrical stripline are calculated using the variational finite element method combined with the conformal mapping. The conformal mapping is used to Improve the modeling of the infinite transverse extents of a stripline. And then the finite element method is employed to solve the variational equation in the transformed finite region. Comparisons with numerical results found in the literature validate the presented method.