• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.419-420
• /
• 2008

근래 무선통신기술의 발전으로 휴대폰 등, 무선기기의 사용이 급증하고 있으며, 주택가 인근에는 많은 무선기지국들이 시설되어 있다. 이러한 무선기기의 무선시설물은 목적한 바의 신호 송출을 위하여 전자파를 방출하고 있다. 본 논문에서는 무선기지국 안테나 근처에 서 있는 사람이 전자파에 노출될 때를 가정하여 2-ray 전파모델을 적용하려 참조규격의 전기장 강도 및 전력밀도를 산출하는 새로운 평가방법을 제시하고, 본 방법을 적용하여 일례의 전자파인체노출기준의 적합성을 평가한 결과를 분석, 고찰한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.311-318
• /
• 2014

Electromagnetic compatibility(EMC) performance of the first Korea space launch vehicle(KSLV-I) should be ensured and verified in order to guarantee the normal operation among the spacecraft, ground facilities which are installed in the space center, and other wireless communication networks. For the purpose of the EMC performance verification, pertinent EMC test specifications, methods, and procedures for both the subsystems and the system should be established in consideration of operational properties and electromagnetic environmental effects. And it is required to maintain and control the EMC properties consistently in accordance with the determined specifications up to the program closing phase. In this paper, sequential management work conducted during the overall development process of the KSLV-I is explained, and not only the phased EMC test plan for each model of the KSLV-I and its subsystem but also test method, specification, and results of the verification tests are presented. And also, multipaction analysis results are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1184-1193
• /
• 2010

The upper frequency of international EMC regulations is being expanded above 1 GHz. Radiated emissions above 1 GHz are different from those below 1 GHz that is existing upper regulation frequency, and which have lower field strength and sharper and tilted beam-width, relatively. In this paper, an effective evaluation method to be used above 1 GHz is studied using an offset parabola antenna system having a double-ridged horn antenna as a feed. First, simple model is proposed for calculating antenna factor and field uniformity of the parabola antenna system, and then real radiated emission and radiated susceptibility measurements are performed using a constant noise emitter and the suggested antenna system. The results show that the proposed antenna system has higher gain and power efficiency, and wider field uniformity relative to a conventional double-ridged horn antenna. Therefore, it is confirmed that the proposed system can be effectively used for EMC measurements above 1 GHz.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.82-86
• /
• 2011

This paper presents an RF Electric field assessment at 2.290 [GHz] inside launcher PROTON M/Breeze M long fairings, produced by COMS TM. COMS intentional RE due to TM ON under fairing has been assessed considering PROTON M / BREEZE M fairing characteristics. As fairings of all launchers present similar sizes, a similar E-field level under fairing is expected for the other launchers. As a result, the RE level under faring is compliant with COMS RS limits, but is not compliant with RS requirements of the launcher PROTON M/Breeze M.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.102-111
• /
• 2004

신속하고 편리한 현대사회의 핵심에는 정보통신 기술이 자리하고 있다. 근래에는 개인용 휴대통신단말기와 무선인터넷 접속을 위한 무선 LAN(local area network) 등 무선통신기기의 사용주파수가 높아져서 1 GHz이상의 주파수 대역에서 불필요한 전자파 발생이 증가하고 있다. 전자파장해 방지 및 내성시험에 관한 국제규격은 국제 전기 기술위원회(IEC, International Electrotechnical Commission) 산하의 민간 전문가들로 구성된 기술위원회(TC, Technical Committee) 77과 국제무선장해특별위원회(CISPR, International Special Committee on Radio Interference)에서 정해진다. TC 17과 CISPR는 많은 심의를 거쳐 1 GHz 이상 주파수 대역의 전자파장해 국제규격을 일부 완성하였으며, 지금도 규격개정 과정에서 활발하게 토의하고 있다. (중략)

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.153-163
• /
• 2003

Electronic equipments and make other electronic systems to operate abnormally by means of electromagnetic interference, or can operate abnormally themselves by electromagnetic interference of other electronic systems. Therefore, electronic equipments are required to reduce their electromagnetic interference as small as for other systems to operate properly and operate properly within electromagnetic interference from other electronic systems. In order to prove that electronic equipments meet such requirements, they should undergo electromagnetic environmental test. In this study, we introduce electromagnetic environmental requirements, test procedures and test results of gimbal engine actuation system of KSR-III.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.116-123
• /
• 2004

대부분의 국가에서는 생산제품의 적합성. 평가를 위해 인정기구를 통한 시험기관 인증제도를 운영하고 있으며, 세계 표준화 기구들과 상호 연계하여 표준화 및 관리 제도를 운영하고 있다. 국내의 경우 정보통신부 전락연구소는 정보통신기기에 대해 분야별로 시험 기관 인증(지정)제도를 운영하고 있으며 이에 대한 사후관리 업무도 수행하고 있다.(중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.917-919
• /
• 2005

This study is based on the recent research which is focused on the correlation of GTEM cell Simulate correlation factor for measurement a result between GTEM cell and OATS

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.222-229
• /
• 2007

Environmental tests should be carried out to show that design performance is in an operational condition in an actual operational environment to assure maintainability and reliability. Aero-products electromagnetic compatibility tests are performed mainly for the individual parts and Specifications MIL-STD-461E and RTCA DO-160E are developed for the military and commercial parts tests respectively. The MIL-STD-461E which is a military environmental test standard is targeting all munitions and that user can apply by selecting applicable requirements from this specification. On the other hand, requirements are applied exclusively for the Avionics Equipments in commercial test standard.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.293
• /
• pp.30-39
• /
• 2001