• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.1
• /
• pp.26-35
• /
• 1996

In this paper, characteristics of the electromagnetically coupled broadband microstrip antennas are analyzed by the Finite Difference Time Domain (FDTD) method, and antenna para- meters are optimized to get maximum bnadwidth. By using short radial tuning stub in microstrip feedline, electromagnetically coupled microstrip antenna shows broadband ($\simeq$13%) characteristics, and the characteristics are varied as a function of radius, radial angle, and position of the radial tuning stub. Operating frequency, return loss, VSWR and input impedance are calculated by Fourier transforming the time domain results. After optimization of the parameters, maximum bandwidth of the radial stub tuning microstrip antenna is about 15% and the ripple char- acteristic of the VSWR is better than the rectangular tuning stub microstrip antenna.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.81-87
• /
• 2003

This paper simulated discharge progress and partial discharge using needle-plan electrode system in air, in this time with discharge progress, studied the distribution of frequency spectrum of the radiated electromagnetic waves using biconical antenna and spectrum analyzer. From results of this study, a method was introduced for measurement and analyzation of the radiated electromagnetic waves in accordance with AC discharge progress in air, Besides, according to the consideration of the mutual relation between frequency spectrum of the radiated electromagnetic waves and discharge progress, it was confirmed that detecting partial discharge and estimating discharge progress were possible.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1233-1238
• /
• 2003

In this paper, radially corrugated circular-type microstrip patch antenna was devised and manufactured for GPS (center frequency: 1.575 GHz). Radially corrugated circular-type microstrip patch antenna having radiational corrugation-patch contributed to add size reduction ratio by lowering the resonant frequency because the edge current also has the extended and perpendicular path. As a result, radially corrugated circular-type microstrip patch antenna has 28 % area reduction than planer circular-type patch antenna for linear polarization and 27.7 % area reduction than planer circular-type patch antenna for circular polarization. Radially corrugated circular-type microstrip patch antenna is suitable for miniaturized receive antenna for GPS which has the characteristic of gain 2.1 dBd, axiai ratio 1.3 dB, 2 dB axial bandwidth 15 MHz(0.9 %).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.32-38
• /
• 2014

In this paper, we design a secant pattern antenna combined with a septum circular polarizer to be used in the satellite data communications. To generate a radiation pattern with secant type, Fourier relationship between current distribution and space factor is applied and the circular symmetric structure of the aperture simplifies the design. The optimization process is performed by combining the radiator with the septum circular polarizer, and it is confirmed that the designed radiation pattern, axial ratio, and return loss characteristics satisfies the required performance of the antenna.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.7-14
• /
• 2021

Recently, the amount of electrical and electronic systems is increasing rapidly with the development of advanced vehicles such as ADAS, smart cars, connected cars, automated driving systems. It is necessary to examine the electromagnetic compatibility of vehicles equipped with those systems. The standards and regulations for examination of electromagnetic compatibility have been established and revised according to newly introduced electrical and electronic systems. They are administered in some different international standard associations such as ISO, CISPR, UN/ECE and are somewhat complex and bulky. In the study, the improvements and changes in them are tracked and analyzed chronologically. Research of the history of them will be helpful for understanding progress and forecasting the direction of development.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.38-45
• /
• 1996

우리의 일상 생활에 있어 가정용 전기기기는 우리 삶의 일부분이라고 말할 수 있을 정도로 그 존재 가치가 절대적이다. 최근 반도체 기술의 발달은 이러한 기기의 제어를 기계적인 방법에서 digital 방식의 전자자적인 방법으로 바꾸어 놓고 있다. 이러한 전자적인 제어장치를 갖는 기기로 의 발전은 사용상의 편리함을 갖고 있는 반면 EMC(Electromagnetic Compactibility)부분에 취약한 단점을 가지고 있다. 특히 가정용 전기기기는 물론이고 전동공구류 또한 일반 가정에서 쉽게 사용 될 수 있는 기기이므로 전자파장해에 대한 문제는 기기의 오동작 문제를 떠나 사용자 신체의 손상 등 위해를 가할수 있는 가능성을 항상 갖고 있다. 가정용 전기기기 및 전동 공구류에 대한 EMC문 제는 장착된 Micro-Processor 구동을 위한 clock 신호, 모터 등 회전기 부분에서 발생하는 불연속 적인 전자파 noise, 전원선에서 발생하는 전도성 noise와 방사성 noise가 그 원인이 되고 있으며 이러한 전자파 noise는 주변에서 동작하고 있는 다른 기기의 동작을 방해하고 또한 주변에서 동작 하고 있는 다른 기기로부터의 전자파 noise에 의해 자신이 영향을 받아 불필요한 오동작을 유발하 기도 한다. 여기에서는 EMI 부분의 경우 금번 고시 내용과 기존의 전기용품 안전관리법의 내용을 비교하였 으며, EMS 부분은 가정용 전기기기 뿐만아니라 고시된 해당 제품 모두를 비교하여 관련 제조업체 및 관계자에게 도움이 되도록 하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.45-52
• /
• 2002

EMI(Electromagnetic Interface) is a measure of electomagnetic radiation from equipment in the range of 10KHz to 3GHz, and can cause unexpected reactions of electronics/electrical equipment. In this study, for safe and stable communication operation, a STGU(System Timing Genetation Unit), which is a 2.5Gbps SDH System and a major EMI source, was employed to simulate electromagnetic interface. In On-Site test, the power of fundamental frequency of EMI of interest and its harmonics were measured. Also, a low pass filter at cut-off frequency of 2GHz was specifically designed to minimize the effect of EMI between electronic components. When the low pass filter was implemented within the STGU, the power of EMI decreased more than 20dBm. Finally, when TIE and MTIE, two important quality measure in synchronous reference clcok, was assessed, ITU-T G8l3 requirements are satisfied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.843-849
• /
• 2002

This study is based on the recent CISPR research which is focused on correlation of OATS and FAR. First, we calculate the correlaton factor about OATS and FAR. We measured the field strengths at the OATS and in the FAR both for 3 m distances to obtain the experimental correlation factors. We programmed correlation factor that calculated from theoretical models. The Results showed the measured correlation factor in 6 dB from 30 to 1,000 MHz. It will be use to substitute FAR for OATS about efficient to measure EMI(Electro Magnetic Interference).

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.2-11
• /
• 2001

The L-shaped strip is shown to be an attractive feed for the thick mierostrip antenna (thickness around 10% of the operating wavelength). The L-strip incorporated with the radiating patch introduces a capacitance suppressing some of the inductance introduced by the strip itself. In this paper, a wideband microstrip patch antenna fed by L-strip for the PCS ($1,750{\sim}1,850MHz$) and IMT-2000 ($1,920{\sim}2,170MHz$) broad-band is presented. A two-element array fed by L-strip is also proposed. Both the antennas have stable radiation patterns across the passband. The impedance bandwidth is over 31% (VSWR < 1.5, 615 MHz) of the center frequency. Moreover, both the antennas have about 7 dBi average gain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.336-344
• /
• 2011

The purpose of this study is to analyze the radiation-pattern characteristics above 1 GHz for the electromagnetic wave radiated from multi-slot such as ventilations, etc. on the enclosure of an EUT and so to make recommendations for suitable test methods. An experimental EUT was formed by putting a comb-generator at the center of a rectangular enclosure with 4 slots, and its radiation pattern was analyzed in the frequency range of 1~6 GHz. As analysis results, multi-lobe appears above 2 GHz and the number of multi-lobes is growing as the frequency increases. And real radiated-emission measurements were performed for the experimental EUT by scanning a receiving antenna in the height of 1~4 m and tilting toward maximum radiation, as well as setting the height of a receiving antenna to the central position of the EUT which is prescribed at the present standards. The measured results are +12.8 dB in the scanning and +16.4 in the scanning and tilting compared with the present standard test method. Therefore, the latter must be revised in order to consider the radiation pattern above 1 GHz.