• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.182.1-182.1
• /
• 2016

전자빔의 운동에너지를 변화시켜 전자기장을 발생시키는 진공튜브 장치는 기본적으로 전자빔 발생부인 전자총을 핵심 구성부로 사용한다. 이러한 전자총을 이용하는 진공튜브로는 핵융합을 위해 플라즈마 가열용의 RF를 발생시키는 자이로트론 튜브와 방사광 가속기에서 전자를 가속시키는데 이용되는 클라이스트론 튜브 등이 있으며, 군사적으로는 레이더를 비롯하여 유도미상일에 들어가는 탐색기, 전투기에서 사용되는 송수신용 마이크로파 발생장치 등의 핵심부품인 진행파관 진공튜브 등이 있다. 이러한 응용분야에서는 기본적으로 고출력의 전자파를 필요로 하기 때문에 반도체를 이용한 장치로는 그 성능을 구현할 수 없다. 따라서 열음극을 사용하는 전자총을 기반으로 한 다양한 형태의 진공튜브 장치가 주로 이용되고 있다. 현재 고출력 마이크로파 진공튜브용 열음극 전자총은 대부분 외국에서 수입하고 있는데 그 이유는 전자총의 핵심 부품인 열음극 캐소드를 국내에서 개발하지 못하였기 때문이다. 하지만 본 연구에서는 텅스텐 기반의 함침형 열음극 캐소드를 국내에서 자체 개발하는데 성공하였다. 전통적으로 미국에서 개발해온 함침형 열음극 캐소드는 텅스텐 소결체에 기공을 학보하고 여기에 Ba을 중심으로 한 알칼리성 물질들을 일정비율로 혼합하여 함침한 것으로 일함수 2.1~2.3 eV 수준의 물성을 갖는다. 이에 따라 방출할 수 있는 전류의 양은 운용 온도 $1000^{\circ}C$ 정도에서 전류밀도로 대략 수 $A/cm^2$ 수준이다. 본 연구에서 개발한 캐소드는 S-type으로 알려진 것으로 BaO : CaO : $Al_2O_3$ = 4 : 1 : 1 비율로 함침되었다. 고진공장치에서 전류측정 결과 $1040^{\circ}C$에서 $10.6A/cm^2$의 전류밀도를 기록하였으며 이에 대하여 Richardson-Dushman equation으로 계산하였을 때, 약 1.9 eV의 일함수를 갖는 것을 알 수 있었다. 이는 현재 많은 응용분야에서 사용하고 있으며 함침형 캐소드에 Os이나 Ir 등의 물질을 코팅하여 일함수를 낮추고 전류밀도를 향상시킨 M-type 캐소드의 결과와 유사한 수준이다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.473-478
• /
• 2011

The extent of a rectangular conducting plane for measuring electromagnetic interference is discussed. Mutual coupling between the transmit and receive antennas is negligible, the effects of the ground plane on the normalized site attenuation(NSA) are considered by applying GTD(Geometric theory of diffraction). The calculation was done for the case that measuring distance(d) was 3 m for both horizontal and vertical polarizations. As the result, the size of the rectangular ground plane almost never affects upon NSA for horizontal polarization, but for vertical case, when both width and length of the rectangular plane are several times as long as distance, the effects of the edges are reduced under 1 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.611-619
• /
• 2016

Success in modern war depends on electronic warfare. Therefore, It is very important to identify the kind of Radar PRI modulations in a lot of Radar electromagnetic waves. In this paper, I propose an algorithm to identify Linear up Sliding PRI, Non-Linear up Sliding PRI and Linear Down Sliding PRI, Non-Linear Down Sliding PRI among many Radar pulses. We applied not only the TDOA(Time Difference Of Arrival) concept of Radar pulse signals incoming to antennas but also a rising and falling curve characteristics of those PRI's. After making a program by such algorithm, we input each 40 data to those PRI's identification programs and as a result, those programs fully processed the data in according to expectations. In the future, those programs can be applied to the ESM, ELINT system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.184-193
• /
• 2015

Passive Surveillance System based on the TDOA detects the emitter position in the air using TOA of pulses comprising emitter signal from multiple receivers. In case that PRI of pulses from the emitter is not enough big in comparison with the distance among receivers, it causes the ambiguity problem in selecting proper pulse pairs for TDOA emitter geolocation. In this paper, a novel ambiguity resolution method of radar pulses is presented by using genetic algorithm after changing ambiguity problem into optimization problem between TDOA of received pulses from each receiver and emitter position. Simulation results are presented to show the performance of the proposed method.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.714-722
• /
• 2014

In the previous study, a variety of wood-based panels was thermally decomposed to manufacture carbonized boards that had been proved to be high abilities of insect and fungi repellence, corrosion and fire resistant, electronic shielding, and formaldehyde adsorption as well as sound absorption performance. Based on the previous study, carbonized medium density fiberboard (c-MDF) was chosen to improve sound absorption performance by holing and sanding process. Three different types of holes (cross shape, square shape, and line) with three different sanding thickness (1, 2, and 3 mm) were applied on c-MDF and then determined sound absorption coefficient (SAC). The control c-MDF without holes had 14% of SAC, however, those c-MDFs with holes had 16.01% (square shape), 15.68% (cross shape), and 14.25% (line) of SAC. Therefore, making holes on the c-MDF did not significantly affect on the SAC. As the degree of sanding increased, the SAC of c-MDF increased approximately 65% on sanding treated c-MDFs (21.5, 21.83, and 19.37%, respectively) compared to the control c-MDF (13%). Based on these results, composite sound absorbing panel was developed with c-MDF and MDF (11 mm). The noise reduction coefficient of composite sound absorbing panel was 0.45 which was high enough to certify as sound absorbing material.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.296-301
• /
• 2021

GPR is used for non-destructive investigations, ground investigations, and underground facilities exploration at construction sites. In this study, the applicability to GPR exploration of water pipes linked to Network RTK was presented. Data on the water supply pipes in the study site were acquired using GPR, and the location and depth of buried water pipes could be measured. The accuracy was evaluated from the GNSS observation performance and showed a deviation of -0.16m ~ 0.15m. This satisfied the equipment performance of the public survey work regulation, suggesting that the exploration of water pipes using GPR is possible. Because GPR does not require grounding installation, as in conventional metal pipe detectors, it will increase the efficiency of work for underground facility exploration. Exploration using GPR can acquire the location and depth of metallic and non-metallic underground facilities, so it can be utilized in the construction of a GIS system. If a comparison of the exploration characteristics is carried out, it will be possible to present various uses of underground facility exploration using GPR.