• Journal of the Korea Computer Industry Society
• /
• v.5 no.8
• /
• pp.791-800
• /
• 2004

According to the cooperation between organizations increases, e-Commerce and virtual organizaions spread, because of IT development, the number of business processes increased from bounds of an organization to crossing organizational boundaries. In order to support dynamic setup of business processes among independent organizations, a formal standard schema of describing the business processes is basically required because of business process models over multiple organizations, which are defined in different fromat by business process modeling systems their own business process modeling systems. The vision of ebXML is to create a single global electronic marketplace where enterprises, without any concerns about size and geographical location, can meet and conduct their businesses with each other through the exchanges of XML-based messages. Therefore, this thesis also analyzes and implements an ebXML based choreography modeling system for supporting collaborations between organizations.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.4
• /
• pp.11-16
• /
• 2015

Data center, not only the development of globally of cloud-based IT solutions, As the big data, education, use of development electronic equipment of communication means is increased, Demand of domestic and international data center has increased steadily. Due to the increase of data center demand, heat generation of server rack due to the development of IT equipment is also increasing continuously. Calculating heat value of the data center, because more than 99% of the power usage of IT server is converted into heat, the calorific value as the size and capacity of the server is larger will increase. In this paper, to center the cooling system of air-cooled, and research and development of air conditioning systems for energy reduction of data center, through performance analysis and simulation, it has been analyzed that there is energy savings.

• Archives of design research
• /
• v.13 no.2
• /
• pp.103-109
• /
• 2000

Rapid prototyping technology has been widely applied to the design process in the industry. This technology made it easy to generate a prototype which acts like a real product in logic. However, this technology has not been validated sufficiently as a usability test method. The purpose of this study was to test the hypothesis : There was no significant difference between a real product and its prototype. An experiment was designed to test it statistically. a microwave oven was selected and its prototype was generated using a rapid prototyping tool. Six subjects used the microwave oven and another six subjects used the prototype to perform five scenario tasks. As a result, there was significant difference between the real product and prototype in success rate, task completion time, and number of buttons pressed. The prototype was more difficult to operate than the real product. Therefore we should be careful when we apply rapid prototyping. technology. In the discussions, the causes of the difference were identified and some guidelines were suggested for who wants to apply rapid prototyping tool to the usability test.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.9
• /
• pp.37-46
• /
• 2009

The movement of the MR loaded on the train is confined to the bidirectional movement along the rail. Therefore, the AR connected to the MR can use the address information of the neighboring ARs and configure CoA in advance before performing L2 and L3 handoff. The MR can acquire new CoA immediately from the present AR after the movement detection procedure. The performance analysis shows that the proposed scheme can provide CoA to the MR about 1.8(s) at minimum and 4.98(s) at maximum faster than the Stateless scheme because the proposed scheme does not carry out any additional CoA and DAD procedure unlike the Stateless scheme.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.2
• /
• pp.37-44
• /
• 2020

In this paper, we proposed that a fully automatic multi-class whole heart segmentation algorithm using deep learning. The proposed method is based on U-Net architecture which consist of recurrent convolutional block, residual multi-dilated convolutional block. The evaluation was accomplished by comparing automated analysis results of the test dataset to the manual assessment. We obtained the average DSC of 96.88%, precision of 95.60%, and recall of 97.00% with CT images. We were able to observe and analyze after visualizing segmented images using three-dimensional volume rendering method. Our experiment results show that proposed method effectively performed to segment in various heart structures. We expected that our method can help doctors and radiologist to make image reading and clinical decision.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.688-694
• /
• 2009

A spray-type cleaning agent in utilizing dust-remover on PCB was chosen to study the cleanliness test and efficiency. In order to choose alternative environmental-friendly cleaning agents, it is important that the systematic selection procedures should be introduced and applied through the evaluation of their cleaning ability, environmental characteristics, and economical factors, and that the objective and effective evaluation methods of cleanliness should be established for the industry. A novel cleaning evaluation method with scanning electron microscopy/energy-dispersive X-ray analysis of surface observation evaluation method and an infra-red thermography camera(THERMOVISION A20 model) was studied in this work. The sound card(CT-2770 model) cut by $2{\times}2cm$ size was used as a part, and before and after the spray cleaning, the cleanliness was observed by the image analyzer of SEM and further the removal efficiency of dust was quantitatively evaluated by the component analysis of EDX. For the parts of P4TE model motherboard and IPC-A-36 PCB plate, before and after the spray cleaning, temperature differences were measured and compared at room temperature and 50 oven temperature by an infra-red thermography camera in the contaminants of dust and iron powder.

• Journal of Internet of Things and Convergence
• /
• v.6 no.4
• /
• pp.59-64
• /
• 2020

Recently, many difficulties have been faced in all parts of the world due to the impact of COVID-19. Personally, household income is decreasing sharply as many jobs disappear, and economically, many SMEs are increasingly going bankrupt. It is known that this phenomenon is highly likely to continue for the time being. In such a situation, the smart factory support project provides opportunities for difficult SMEs to improve productivity and change the corporate structure. In this study, the current status of smart factory promotion was examined, and problems occurring in the process of promoting smart factory support projects were identified. The improvement plans were derived so that more efficient projects could be promoted in the future.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.289-291
• /
• 2005

고도화, 정보화시대를 맞이하여 대형인버터, 컴퓨터 등 전력풀질을 저하시키는 비선형 부하의 보급이 확대되고 있으며, 이들 비선형부하에 의한 전력품질 저하시 공정제어기, 마이크로프로세서 등과 같이 전력품질에 매우 민감한 기기의 오동작 등으로 경제적 피해가 증대되고 있다. 따라서 중요부하 및 계통을 보호하기 위한 전력전자 기술을 응용한 전력품질 보상기기 적용이 필요하다. 이에 본 연구에서는 전력품질 향상기기 성능평가 텐 실증기술 개발을 위한 전력풀질 실증시험장 구축 및 전력풀질 향상기기 실계통 적용시 효과분석을 위한 해석기법을 확보하고자 하였다. DSTATCOM, DVR, SSTS 등 전력품질 향상기기의 성능평가를 위해서 실계통에서 발생되는 외란을 모의할 수 있는 외란발생장치 등 시험설비와 전력품질 향상기기 및 실증시험설비를 제어하는 S/W와 시험결과를 분석하기 위한 전력품질 측정 및 분석시스템을 구축하였다. 순간전압강하, 순간전압 상승 파형을 외란발생장치를 구현하고 전력품질 향상기기의 보강효과를 분석하였다. 또한 전력품질 향상기기(DVR, DSTATCOM, SSTS)와 부하 등 시험설비에 대하여 EMTDC 프로그램용 모델 및 해석기법을 개발하였다.

• Journal of Digital Contents Society
• /
• v.7 no.2
• /
• pp.89-94
• /
• 2006

It can be said that P2P means the pattern that every linker could be both a supplier and a customer by means of the direct connection and survey with personal computers out of the concept of server and client. P2P business has been a great impact all over the world. for it came to be possible as the express internet log-on service is getting widely used and the user environment is getting better with the supply of high-tech computer. Recently the various system of P2P has been developed not as the only service of file share between the personal users but as the application of the electronic trade between the companies. This study is to suggest the most effective system that has the function of complement of P2P.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.46-46
• /
• 2018

메모리 소자의 수요가 데스크톱 컴퓨터의 정체와 모바일 기기의 폭발적인 증가로 NAND flash 메모리의 고집적화로 이어져서 3차원 집적 기술의 고도화가 중요한 요소가 되고 있다. 1 mm 정도의 얇은 웨이퍼 상에 만들어지는 메모리 소자는 실제 두께는 몇 마이크로미터 되지 않는다. 수직방향으로 여러 장의 웨이퍼를 연결하면 폭 방향으로 이미 거의 한계에 도달해있는 크기 축소(shrinking) 기술에 의지 하지 않고서도 메모리 소자의 용량을 증대 시킬 수 있다. CPU, AP등의 논리 연산 소자의 경우에는 발열 문제로 3D stacking 기술의 구현이 쉽지 않지만 메모리 소자의 경우에는 저 전력화를 통해서 실용화가 시작되었다. 스마트폰, 휴대용 보조 저장 매체(USB memory, SSD)등에 수 십 GB의 용량이 보편적인 현재, FEOL, BEOL 기술을 모두 가지고 있는 국내의 반도체 소자 업체들은 자연스럽게 TSV 기술과 이에 필요한 장비의 개발에 관심을 가지게 되었다. 특히 이 중 TSV용 스퍼터링 장치는 transistor의 main contact 공정에 전 세계 시장의 90% 이상을 점유하고 있는 글로벌 업체의 경우에도 완전히 만족스러운 장비를 공급하지는 못하고 있는 상태여서 연구 개발의 적절한 시기이다. 기본 개념은 일반적인 마그네트론 스퍼터링이 중성 입자를 타겟 표면에서 발생시키는데 이를 다시 추가적인 전력 공급으로 전자 - 중성 충돌로 인한 이온화 과정을 추가하고 여기서 발생된 타겟 이온들을 웨이퍼의 표면에 최대한 수직 방향으로 입사시키려는 노력이 핵심이다. 본 발표에서는 고전력 이온화 스퍼터링 시스템의 자기장 해석, 냉각 효율 해석, 멀티 모듈 회전 자석 음극에 대한 동역학적 분석 결과를 발표한다. 그림1에는 이중 회전 모듈에 대한 다물체 동역학 해석을 Adams s/w package로 해석하기 위하여 작성한 모델이고 그림2는 180도 회전한 서브 모듈의 위상이 음극 냉각에 미치는 효과를 CFD-ACE+로 유동 해석한 결과를 나타내고 있다.