• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.301-304
• /
• 2002

This paper describes a design and fabrication of an electronic ballast for 70［W］ceramic discharge metal halide lamps. The proposed ballast is composed of a rectifier, an active PFC, a half-bridge inverter, a LC resonant circuit and a controller. The design also includes a specially designed time circuit which provides reignition of the lamp. Running frequency of the ballast is set at 45［KHz］to avoid acoustic-resonance and flicker. from the test results, input power factor and efficiency of the ballast were estimated 91［%] and 97.7［%］, respectively.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.38-44
• /
• 2003

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.691-700
• /
• 1994

A power line in not so good in characteristics for communication, because it is a media to transfer the commercial electrical power, and its load noise and high frequency noise are so much. Thus, a simple method to transfer a remote control signal on the power line is studied. The already-existing method is that two signals with upper part eliminated is transmitted every N step. But the method is investigated which the transmitter sends a period signal eliminated in arbitrary phase. Thus the transmission power loss due to elimination of signal can be reduced to the minimum. To implement it, a timer calculating the time from zero-crossing point to the phase is required. The micro-controller, 87C51, precisely calculates the phase using one of two built-in timers. As a result, a remote control signal tramsmitter and receiver using a partially eliminated signal, which is better than the conventional technique using half-eliminated signal in a efficiency of power transmission, is realized, and its characteristics are analyzed.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2066-2068
• /
• 1997

네온용 전자식 안정기(EBN)의 출력선간 전자파방해(EMI)로 인한 네온관간의 신호상쇠 현상을 방지하는 회로를 설계하였다. 특히 네온관이 가까이 위치할 때 전자파유도로 인하여 네온발광이 상쇄되는 원인을 방지함으로써 EBN의 성능이 개선되는 결과를 얻었다. 또한 유도전자파를 방지함으로써 인체에 유해한 전자파를 차단하는 효과도 얻었다.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.123-127
• /
• 2008

This paper studied the sensitivity characteries of the electronic ballast for the discharge lamps, which implies variation ratio of the output power by the passive element variation. We have derived the equation to represent the lamp power, and obtained the sensitivity characteristic equations. The simulation result shows that the proposed equations are correct and very useful to design the electronic ballast with the LCpCs-type resonant tank.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1995.10a
• /
• pp.39-46
• /
• 1995

Metal halide pamp for LCD projector back light is high technologlcal product with its consumption increasing by 30% a year according to LCD merchandise and we are whollydepending on imprtation. At this time exper iment. we achleved those results as below. 1. Reallzation of domestic production of 150W metal halide lamp for LCD progector back light and electrical ballatst. 2. Possession of self-designing and manufacturing technology of submlnlature metal halide lamp. 3. Possession of deslgning technology of electrlcal ballast for metal hallde lamp.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.435-439
• /
• 2002

This paper describes a design and fabrication of an electronic ballast for 70[W] ceramic discharge metal halide lamps. The proposed ballast is composed of a rectifier, an active power factor correction circuit (PFC), a half-bridge inverter, a LC resonant circuit and a microprocessor. The developed ballast also includes a specially designed time circuit which provides reignition of lamps. Running frequency of the ballast is set at 40[kHz] to avoid acoustic-resonance and flickering. From the experimental results, input power factor and efficiency of the ballast are estimated 99.8[%] and 93.1[%)] respectively.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.2
• /
• pp.38-44
• /
• 1996

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.479-480
• /
• 2011

본 논문은 150W HID 램프용 안정기의 공진 점등에 관한 것으로, 기존의 외부 펄스에 의한 점등 시 램프와 안정기의 거리에 따른 점등전압의 감쇠를 감소시키고자 내부 LC를 이용한 공진 점화부로 하여 기능을 향상하였으나, 벅 컨버터의 인덕터와 커패시터로 공진 기동하여 고전압 점등 파형을 만드는 과정 중 스위치 전류가 커지는 문제가 발생하여, 점등을 위한 공진용 커패시터용량을 줄여 공진 Q점을 나눈 별도의 L(T1)과 C(C2, C3)를 공진 탱크로 이용하여 점등하도록 하였으며, 공진 공진주파수로의 주파수 SWEEP 및 재 점등을 하기 위하여 마이크로프로세서를 이용하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1055-1061
• /
• 2002

This paper deals with a design and fabrication of an electronic ballast for 70[W] ceramic discharge metal halide lamps. The proposed ballast is composed of a rectifier, an active power factor correction circuit (PFC), a half-bridge inverter, a LC resonant circuit and a microprocessor. The developed ballast also includes a specially designed time circuit which provides reignition signal of lamps. Running frequency of the ballast is .jet at 40[kHz] to avoid acoustic-resonance and flickering. From the experimental results, input power factor and efficiency of the ballast are estimated 99.8[%] and 93.1[%], respectively.