• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.38-38
• /
• 2010

낮은 세기의 레이저와 정지한 전자가 반응하면 전자는 레이저 전기장 세기에 비례하여 가속되며 레이저의 파장과 같은 파장의 빛을 낸다. 반면, 레이저의 세기가 일정 수준을 넘으면 전자의 속도가 빛의 속도에 가까워지게 되어 가속이 둔화되는 현상이 나타나며, 더 이상 전기장의 세기와 가속도가 비례하지 않게 된다. 이러한 비선형적인 전자의 운동이 레이저 기본 파장의 조화파(harmonic)를 발생시키는데, 이를 상대론적 비선형 톰슨 산란(relativistic nonlinear Thomson scattering, RNTS)이라고 한다. 단일 전자를 가정한 경우 RNTS에 의해 아토초($10^{-18}$ 초) 길이의 X선 펄스가 발생하는 것이 시뮬레이션 연구를 통해 잘 알려졌다. [1] 그러나, 실제 실험에서 적용할 수 있는 것은 단일 전자가 아니라 고체, 플라즈마, 전자 빔 등의 전자 덩어리이다. 전자덩어리를 구성하는 각각의 전자가 아토초 펄스를 발생시더라도 각각의 펄스 간에 결맞음(coherence) 조건이 맞지 않으면 아토초 펄스는 발생되지 않는다. 또한, 강한 세기의 펄스를 얻는데도 결맞음은 중요하다. 이 연구에서는 결맞음 조건으로 얇은 타깃에 대한 거울 반사 조건, 즉 레이저가 얇은 타깃에 입사되며 거울의 반사 조건을 만족하는 위치에 검출기(detector)를 위치시키는 방법을 제안하였다. 박막이 충분히 얇을 경우 각각의 전자에 대하여 레이저가 발사되어 타깃에 맞고 검출되기까지의 시간이 거의 일치하게 된다. 거울 반사 조건에 의한 아토초 펄스 발생은 particle-in-cell 방법을 통한 시뮬레이션으로 검증되었다. 결맞음 조건을 위한 얇은 타깃으로는 박막과 나노선 배열(nanowire array)을 사용하였다. 전자들 간의 쿨롱(Coulomb) 힘은 결맞음이 유지되는 것을 방해하는데, 박막에 비해 나노선 배열이 쿨롱 힘의 영향을 적게 받기 때문에 결맞음이 더 잘 유지된다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.5
• /
• pp.483-490
• /
• 1999

In this paper, the cost-effective design of output reactor which is USCD to suppress the over-voltage at the m motor terminal in the Adjustable Speed Drives(ASD) application is proposed. In the elevator drive svstem. the R IXlwer cable length is relatively shorter than other ASD applications and then the over voltage at the motor terminal depends on the frequency characteristics of the output reactor at the over voltage operating frequency. The over-voltage suppression mechanism of output reactor in ASD application is analyzed and the dominant parameters of output reactor for the over-voltage supression are extracted. Using these as the design values and considering the high frequency characteristics of iron core in the reactor. a new c cost-effective structure of output reactor is proposed. Experimental results of the conventional reactor and the p proposed reactor with a l5kW induction motor are given to verify the propoSLD scheme.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1415-1420
• /
• 2014

3D printer is based on an additive manufacturing technology, which helps in creating the three-dimensional object using a 3D drawing. It is used in various fields, because it prints out a variety of three-dimensional products in a short period of time. In this paper, we consider a technique using the FDM(Fused Deposition Modeling) method by dissolving the ABS(Acrylonitrile Butadiene Styrene) resin among a diversity of printing technique and materials. This kind of the 3D printer prints out a product in high temperature and cools down it. In this process, a flection phenomenon is occurred according to the size of the printing product and the surrounding environment. Conventional methods for mitigating this phenomenon maintain the temperature at the optimum level, but they require using additional devices. In order to minimize the flection phenomenon in 3D printing products without additional devices, in this paper, we propose a noble technique, which creates holes on suitable positions when they are designed by 3D drawing tools. Also, we suggest mathematical model for the proposed method, and measure and analyse a printing output using a proposed technique.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.513-518
• /
• 2022

Electron beam quality assurance (QA) should be done regularly for accurate radiation therapy. However, QA tools used in clinical practice are designed mainly for X-rays. So, a dosimeter for electron beam QA is required. Therefore, in this study, the electron beam detection performance was measured by using a thorium bromide material as an electron beam sensor. In addition, it was evaluated whether it could be applied with an electron beam QA dosimeter. Reproducibility, linearity, and dose rate dependence were evaluated at 6 MeV and 9 MeV energies. As a result of reproducibility, it showed a maximum output change of 0.92% at 6 MeV and 1.15% at 9 MeV. The linearity result evaluation and determination coefficient were presented as 0.9998. As a result of dose rate dependence evaluation, relative standard deviation 0.51% at 6 MeV and relative standard deviation 1.07% at 9 MeV were presented. The manufactured TlBr sensor shows the ability to detect radiation that meets the criteria for evaluation of reproducibility, linearity, and dose rate dependence. These results mean that the TlBr dosimeter is applicable as an electron beam QA dosimeter.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.4
• /
• pp.1-5
• /
• 1970

This presents the way in shich the input impedance, and the output waveform of the line discriminator are influenced by a discrepancy of less than $\pm$10% in the coupling resistor resistance from the optium value(Characteristic impedance of the transmission line used in the line discriminator)

• Progress in Medical Physics
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2002

Accurate knowledge of the distribution of contamination electrons ( which comes from mainly gantry head by Compton scattering, pair production, and tray: henceforth called leptons ) at the surface and in the first centimeters of tissue is essential for the clinical practice of radiation oncology. Such lepton tends to reduce or eliminate the ‘skin-sparing’ advantage of megavoltage photon beam radiotherapy, This information is needed to prescribe a absorbed dose to a skin volume at a few millimeter depth in high energy therapeutic radiation photon beam All experiments were done with 15 MV photon beam from a dual energy linear accelerator (Clinac 1800, Varian). Field size is defined by ranged from 10.0$\times$10.0 to 30.0$\times$30.0 $\textrm{cm}^2$. The absorbed dose and distribution of leptons in therapeutic radiation beam (15 MV) are investigated by means of variable blocked beams of 30.0$\times$30.0 $\textrm{cm}^2$ and dose beam profiles partly removed leptons with a copper plate. A numerous leptons mainly are distributed as shape of broad cone in the central photon beam and leptons path length in the water are shorter than 2.5 cm because of the leptons energy having around 3.0 MeV. These results clearly appears that the subtraction of leptons from the total depth dose curve not only lower the absolute dose in the buildup region and surface dose, it also causes a shift of d$_{max}$ to a deeper depth.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.4
• /
• pp.31-37
• /
• 1980

In this paper, we are concerned with the problems of fault- detection for combinational logic networks. The method which we can obtain the complete test sets using propagation of primitive test sets is presented by considering the relation between test sets of each line. A new method is proposed that can detect the fault through the observation of the output variance by applying only the test sets equivalent to the number of inputs We found that the method is much improved compared to the conventional fault detecting procedure that requires applying the complete test sets to the logic networks.

• 전자공학회논문지 IE
• /
• v.44 no.2
• /
• pp.41-46
• /
• 2007

In this paper, we have proposed Station Safety Management System to protect station accident. we establish a sensor part near an underground rail. If a passenger approaches an underground rail, at first, lamp is shining and warning sound is ringing. nevertheless he approaches end of underground rail, At the same time, lamp is shining, warning sound is ringing, this information transfer server and train using wireless LAN. We makes this system using low cost in comparison with another system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.1
• /
• pp.72-78
• /
• 2000

본 논문에서는 이중여자 유도기를 풍력발전에 적용할 때 회전자위치 센서를 사용하지 않고 발전 출력제어 방법을 제안하였다. 모델기를 풍력발전에 적용하여 운전할 때 고정자는 계통선에 연결되어 있기 때문에 고정자 자속은 일정 값을 가지며 고정자 자속의 동기 각\ulcorner고는 일정한 상수값을 가진다. 또한 회전자 전류 및 고정자 전압과 전류를 이용하여 슬립각을 추정함으로써 속도를 추정할 수 있고 뿐만 아니라 회전자 전류제어에 의해 고정자측의 발전전력을 제어할 수가 있다. 이른 토대로 속도제어 및 발전출력에 대한 결과를 나타내므로써 제안한 알로리즘의 타당성을 입증하였다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.76-77
• /
• 2011

태양광 발전 시스템에서 태양광 모듈은 일사량과 온도에 따라 출력특성이 변하고 비선형적인 특성을 지니고 있다. 따라서 최대전력 출력을 얻기 위해서는 컨버터에 의한 최대 전력점 추종제어가 필요하다. 특히 발전시스템에서 요구하는 전기적 특성을 맞추기 위해 다수의 태양모듈을 직병렬로 연결하여 구성하는데 있어서 그림자 혹은 일부 모듈이 정상작동하지 않아 미스매치 손실이 발생하게 된다. 본 연구에서는 미스매치 손실을 극복하는 최대전력점을 추종하는 제어알고리즘을 설계하였고 이를 시뮬레이션을 통해 검증하였다.