• Electrical & Electronic Materials
• /
• v.6 no.6
• /
• pp.524-535
• /
• 1993

본 연구에서는 SF$_{6}$가스의 전자이동속도를 더블히트파이프 실험장치를 이용하여 유도전류법에 의해 실험적으로 측정하였다. 그리고 전자수송계수의 정량적인 산출은 볼츠만 수송 방정식의 Backward-Prolongation을 이용하여 계산하고 해석하였다. 이때 전자에너지 분포함수와 전리 및 부착계수를 구하고 운동량변환단면적을 결정하였다. 그리고 실험적으로 측정된 SF$_{6}$가스의 전자이동속도와 계산된 전자수송계수를 비교 검토하여 해석함으로서 절연체의 기초적인 물성자료로 사용할 수 있다.

• 전기의세계
• /
• v.29 no.6
• /
• pp.349-353
• /
• 1980

본고에서는 기체중에서 전자의 전이과정을 관찰하기 위하여 많이 적용되어지는 방법에 대해서 기초적인 사항만 언급을 하였으나 이러한 technique를 사용함으로써 전하의 공간적인 분포상태를 파악할 수 있으며 avalanch의 전자나 이온의 이동으로 인하여 외부회로에 전류를 발생시키는데 이것은 amplifier와 oscilloscope에 의하여 측정을 할 수 있다. 또한 인가한 전계의 작용으로 전자가 양극으로 이동할 때 충돌전리작용에 의하여 새로운 전자를 생성할 뿐만 아니라 여기방사작용에 의하여 광자를 생성시킨다. 이러한 광자는 photomultiplier나 image-intensifier를 사용하므로써 감지할 수 있다. 이러한 결과로부터 우리는 전이현상의 기본적인 Data 즉 전자, 양이온 및 음이온의 이동속도, 전리계수 .alpha.와 부착계수 .eta.등을 유도할 수 있다.

• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.462-472
• /
• 1994

In this paper, electron drift velocity is experimentally measured in SF$_{6}$+N$_{2}$ Gas by induced cur-rent method and quantitaive production of electron transport coefficient is calculated by backward-prolongation of Boltzmann equation. Then electron energy distribution function and attachment coefficients are calculated. This paper can use the electron drift velocity by experimentally and the electron transport coefficient by calculated as a basic data of mixed Gas by comparing and investigating.g.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.6
• /
• pp.96-103
• /
• 1996

This paper describes the electron transport characteristics in SF6 gas calculated for range of E/N values from 150~ 800[Td) by the Monte Carlo simulation and Boltzmann equation method using a set of electron collision cross sections detennined by the authors and the values of electron swarm parameters are obtained by TOF method. The results gRined that the values of the electron swarm parameters such as the electron drift velocity, the electron ionization or Rttachment coefficients, longitudinal and transverse diffusion coefficients agree with the experimental and theoretical for a range of E/N. The properties of electron avalanches is concerned electron energy non--equilibrium region. The electron energy distributions function were analysed in sulphur hexafluoride at E/N : 500~800[Td) for a case of non-equilibrium region in the mean electron energy. The validity of the results obtained has been confilll1ed by a TOF method.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1455-1456
• /
• 2006

반도체 에칭분야에 많이 이용되고 있는 $CF_4$, $C_{2}F_6$, $C_{3}F_8$가스들의 전자수송계수들을 볼츠만 방정식을 이용하여 해석하고자 한다. 특히 혼합가스를 이용하여 확산방전스위치에서 요구되어지는 특성을 파악하고자 할 때 시뮬레이션에 의한 적절한 혼합비 구현을 위하여 이들 순수가스들이 가지고 있는 전자충돌단면적을 해석하고, 전자이동속도와 부착계수 값을 2항과 다항근사 볼츠만 해석을 통해 $0.1{\sim}300$ Td에 걸친 광범위 표에서 해석하고자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.95-101
• /
• 1999

The electron energy distributions function were analysed in sulIitur hexaflowide at E/N : 500~800(Td) for a case of non-equilibrium region in the nran electron energy. This papa- describes the electron transport characteristics in $ SF_6$ gas calculated for range of E/N values from 150~800(Td) by the Monte Carlo simulation and Boltzmann equation Irethod using a set of electron collision cross sectioos determined by the authors and the values of electron swarm parameters. The results gained that the value of an electron swarm parameter such as the electron drift velocity, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients agree with the experimental and theoretical for a range of E/N. The properties of electron avalanches in an electron energy non-equilibrium region.region.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.10
• /
• pp.45-50
• /
• 1999

We report a solder-clad fiber Bragg grating(FBG) temperature sensor in order to obtain better Bragg wavelength sensitivity to temperature than a bare FBG sensor. The solder-clad FBG sensor shows a wavelength sensitivity improvement by a factor of four compared to the case of a bare FBG sensor at temperatures below $110^{\circ}C$. However, it has a sensitivity of 0.01 $nm/^{\circ}C$ at temperatures over $110^{\circ}C$, which is identical to that of a bare FBG sensor. Bragg wavelength of the sensor shows a blue-shift below $110^{\circ}C$ because the sensor is fabricated above melting temperature of solder. The thermal stress at the FBG-solder interface has been relieved by annealing, which results in a stable operation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1049-1056
• /
• 2014

Microelectronics components contain various materials with different coefficients of thermal expansion (CTE). Although a large amount of published data on the CTE of standard materials is available, it occasionally becomes necessary to measure this property for a specific actual material over a particular temperature range. A change in the temperature of a material causes a corresponding change in the output of the strain gage installed on the specimen because of not only the mechanical load but also the temperature change. In this paper, a detailed technique for CTE measurement based on these thermal characteristics of strain gages is proposed and its reliability is evaluated. A steel specimen, aluminum specimen, and copper specimen, whose CTE values are well known, were used in this evaluation. The proposed technique was successfully applied to the measurement of the CTE of a coreless package substrate composing of electronics packages.

• Food Engineering Progress
• /
• v.23 no.4
• /
• pp.283-289
• /
• 2019

This study was performed to determine the effect of psyllium husk addition on the physical properties of rice extrudates. Rice-based formulations mixed with psyllium husk (0, 7, 14 and 21%) were extruded at a die temperature of 140℃, screw speed of 200 rpm, and moisture content of 20%. As the content of psyllium husk increased, expansion ratio decreased, while piece density and specific length increased. Apparent elastic modulus, breaking strength, adhesiveness, and hardness augmented with an elevation in psyllium husk content. Lightness declined as psyllium husk content furthered, while redness, yellowness, and color difference intensified. Water soluble index and water absorption index increased with an increased amount of psyllium husk. In conclusion, the addition of psyllium affected the expansion of extruded rice snack possessing hard texture, small cells, and sticky texture due to higher water absorption during hydration.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.635-642
• /
• 2004

In electric motor coaches. the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the weight of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, the electric motor coach has slip phenomena. This paper proposes a re-adhesion control based on disturbance observer and sensor-less vector control. The numerical simulation and experimental results point out that the proposed readhesion control system has the desired driving wheel torque response for the tested bogie system of electric coach. Based on this estimated adhesive effort, the re-adhesion control is performed to obtain the maximum transfer of the tractive effort.