• Journal of the Korean Magnetics Society
• /
• v.22 no.3
• /
• pp.97-102
• /
• 2012

In this paper, a non-contact power transferring has been performed. Power Transferring by using an electromagnetic inductive coupling is more suitable for high power transmission than by using a magnetic resonance method. Power transferring system has been designed with Loading Distribution Method to divide the electric and magnetic loading for designing the magnetic core and electric coil. To design optimum shapes of magnetic yoke, 3D finite element analysis has been performed. Experimental results show good agreement with numerical ones. So, it could be adopted in the electric power transferring system for a short-distance wireless electric power transferring machine.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.10
• /
• pp.809-816
• /
• 2014

This paper presents a systematic optimization process for designing an electromagnetic vibration energy harvester using FEA(finite element analysis) to improve computational accuracy and efficiency. A static FEA is used in the optimization process where trend analysis in a short period of time is rather important than precise computation, while a dynamic FEA is used in the verification step for the final result where precise computation is more important. An electromechanical transduction factor can be calculated efficiently by using an approach to use the radial component of magnetic flux density directly instead of an approach to compute the flux density gradient. The proposed optimization process was verified through a case study where simulation and experiment results were compared.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.768-769
• /
• 2015

본 논문에서는 3상, 1250MVA, 345kV급 전력용 변압기의 하우징 영역에 대한 온도상승 연구를 유한요소법과 시험을 통하여 수행하였다. 하우징 영역에 대한 전자계 요한요소 해석을 통해 와전류 손실을 수행하였고, 이를 열원으로 하여 변압기 내 외부 냉각조건을 고려하여 온도상승 분포와 최고온도 상승 값을 해석하였다. 이를 제작된 변압기를 대상으로 온도센서 및 열화상 카메라를 이용한 측정 데이터와 비교하여 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1269-1270
• /
• 2015

외부에서 발생되는 전자파가 특정 구조물 내에 침투하는 경우, 특히 구조체가 도체로 이루어 졌을 때, 구조체의 크기에 따른 특정 주파수가 공진을 일으켜 내부 PCB(Printed Circuit Board), 회로 등에 악영향을 미친다. 본 논문에서는 개구면이 존재하는 공진기에 전자기파가 입사되는 상황을 모드매칭(MM: Mode Matching)을 이용해서 해석한다. 이때 외부 전자파로 인해 개구면에 생기는 새로운 소스를 표면 등가 이론(Surface equivalence theorem)을 이용하여 등가 자기전류로 모델링하여, 공진기 내 외부의 전자기장을 구한 후 개구면에서 접선성분의 경계조건을 적용시켰다. 본 논문에서 사용된 계산식의 검증을 위해 3차원 유한 요소법(FEM: Finite Element Method)기반의 프로그램인 HFSS를 이용 하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.772-773
• /
• 2008

본 논문에서는 ECT Array Probe를 이용한 원자력 발전소의 SG세관의 결함 신호를 해석하였다. 프로브의 전자기적 특성을 해석하기 위하여 맥스웰 방정식을 이용하여 지배방정식을 유도하였고, 3차원 유한요소법을 이용하여 전자기 수치 해석을 수행하였다. 신호해석을 위해 사용된 결함의 종류는 FBH결함이며, 결함의 깊이는 세관 두께의 40[%] 및 100[%]로 하였다. 시험주파수는 300[kHz], 400[kHz]를 사용하였으며, 각각의 시험주파수에 대한 결과를 비교 분석하였다. 해석결과 결함부위에서 신호의 증가를 확인할 수 있었으며, 주파수 시험변화시 300[kHz]보다 400[kHz]일때 결함 신호가 증가하는 것을 확인할 수 있었다. 또한 획득한 신호를 ASME 표준 시험편을 이용한 ECT Array Probe의 와전류탐상 실험신호와 비교하였다. 본 논문의 결과는 ECT Array Probe를 이용하여 원전 SG세관 검사시 결함신호해석에 도움이 될 것으로 사료된다.

• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.63-69
• /
• 2017

Naval ships are particularly required to maintain acoustic and magnetic silence due to their operational characteristics. Among them, underwater magnetic field signals derived by ships are likely to be detected by threats such as surveillance systems and mine systems at close distance. In order to increase the survivability of the vessels, various techniques for reducing the magnetic field signal are being studied and it is necessary to consider not only the magnitude of the magnetic field signal but also the gradient of it. In this paper, we use the commercial electromagnetic finite element analysis tool to predict the induced magnetic field signal of ship's scaled model, and arrange the degaussing coil. And the optimum degaussing current of the coil was derived by applying the particle swarm optimization algorithm considering the gradient constraint. The validity of the optimal degaussing technique is verified analytically by comparing the magnetic field signals after the degaussing with or without gradient constraint.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1119-1127
• /
• 2010

In this paper, the design and nonlinear simulation of a multistable electromagnetic microactuator, which provides four stable equilibrium positions within its operating range, have been discussed. Quadstable actuator motion has been made possible by using both X- and Y-directional bistable structures with snapping curved beams. Two pairs of the curved beams are attached to an inner frame in both X- and Y-directions to realize independent bistable behavior in each direction. For the actuation of the actuator at the micrometer scale, an electromagnetic actuation method in which Lorentz force is taken into consideration was used. By using this method, micrometer-stroke quadstability in a plane parallel to a substrate was possible. The feasibility of designing an actuator that can realize quadstable motion by using the electromagnetic actuation method has been thoroughly clarified by performing nonlinear static and dynamic analyses and electrothermal coupled-field analysis of the multistable microactuator.

• Journal of the Korean Magnetics Society
• /
• v.20 no.1
• /
• pp.28-33
• /
• 2010

The purpose of this paper is to analyze and design a new hybrid electromagnetic linear actuator for linear pumps. Solenoid linear actuator is widely used because it occupies small space due to no mechanical energy conversion system. In addition, the energy loss is very low and it has no noise. Conventional solenoid linear actuator, however, has the critical drawback of high power consumption. In this research, we present a new hybrid electromagnetic linear actuator using a permanent magnet in order to reduce power consumption. The enhanced performance of the hybrid linear actuator was verified by dynamic finite element analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.70-73
• /
• 2000

This paper present a new sort of multilayer piezoelectric ceramic transformer for AC-adapter. This piezoelectric transformer operates in the second longitudinal vibration mode. The output voltage of the multilayer piezoelectric transformer was simulated using ANSYS, that is one of the FEM analysis program. As results, the minimum displacement was occurred at the two paints where one is the middle of input and the other is middle of output side in second thickness extensional vibration mode. And output voltage was inversely decreased by increasing number of output layers. 缀Ѐ㘰〻ሀ䝥湥牡氠瑥捨湯汯杹

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.431-433
• /
• 2008

본 논문에서는 원자력 발전소의 SG세관 검사를 위한 배열와전류프로브의 와전류탐상 특성을 해석하였다. 신호해석을 위해 원자력발전소 SG 세관의 내부 및 외부결함을 모델링하였으며, 결함의 깊이는 세관 두께의 40[%]로 하였다. 해석방법은 3차원 유한요소법을 이용하여 전자기 수치 해석을 수행하였다. 두 종류 결함의 수치해석 비교 결과 내부결함의 신호가 외부결함 신호에 비해 크게 발생되는 것을 확인할 수 있었으며, 또한 획득한 신호를 ASME 표준 시험편을 이용한 배열와전류 프로브의 와전류탐상 실험신호와 비교하였다. 본 논문의 결과는 원전설비검사를 위한 배열와전류프로브 신호의 특성해석에 도움이 될 것으로 사료된다.