• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.259-264
• /
• 1999

The relationship is derived for color CRT display system between the spectral radian existence emitted and digital inputs. The amount of spectral radiant existence depends on the characteristics of the video board, electric circuits, and CRT as well as digital inputs. Especially, the function of this relationship changes as the amplifier gain and offset voltage of electric circuits. In this study, we set the test display system on the optimum state which satisfies gun independence characteristics by using the contrast and the brightness controls of display. Temporal stability, special uniformity, and color distinction of CRT display system are evaluated at the optimum state. Also contrasts in dark room and illuminated room are compared.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.68-72
• /
• 2004

In this paper, the energy conversion theory of the linear actuator deals with the temperature characteristic analysis with verifying temperature of linear Actuator system This model of linear actuator has winding part and mechanical spring, and a plunger. This paper proposed and experimented the linear Actuator(LA) by using finite difference equation(FDE). The experimental result represented the temperature T1 and T2 which remarks Tl is a center of magnetic road inside of actuator winding part, and T2 is a surface of actuator winding part. And the temperature characteristic of the actuator winding part are experimented by the digital temperature meter TECPEL 322.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.136-141
• /
• 2004

A torsional guided wave mode was applied to detect a crack in a pipe. An array of electromagnetic acoustic transduce. (EMAT that can generate and receive torsional guided ultrasound with the frequency of 200kHz was designed and fabricated for testing a pipe of 2.5 inch diameter Artificial notches with various depths were fabricated in a bent feeder pipe mock-up and the detectability was examined from the distance of 2m of the specimen. The axial notches with the depth of 5% of wall thickness were successfully detected by a torsional mode (T(0,1)) generated by the EMAT However, it was found that the depth of defects was not related to the signal amplitude.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1219-1224
• /
• 2016

The current wireless power charge technologies are based on induction coupling, magnetic resonant coupling, electromagnetic wave, etc. However, the current wireless power charge technologies has several disadvantages including short transfer range, electromagnetic interference, etc. In this paper, we investigate and demonstrate a laser wireless power charge technology. A laser source is used in the transmitter to convert from electric power to optical power and a solar cell or a photodiode is used in the receiver to convert from optical power to electric power. The laser wireless power charge technology may be the most efficient wireless power charge technology in the long distance over than 10 meters. Our experimental results show a transfer efficiency of 2.15% at the 70-m long distance with a 100 mW laser transmitter and a photodiode receiver.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.553-563
• /
• 2010

This paper presents a tapered slot-antenna(TSA) for optimal impulse-signal transmission in ultra-wide band(UWB). The proposed TSA provides radiates in end-fire direction, which meets an impulse-radio UWB(IR-UWB) system demands(e.g., low loss, thus less error throughout the UWB band). In order to minimize the pulse distortion, we used an wideband impedance transformer and a microstrip slotline. The pulse fidelity characteristics was evaluated with finite-difference time-domain(FDTD) analysis technique and pulse fidelity correlation equation. Approximately 93.89 % pulse fidelity was obtained between the two antennas in 0.5 m range. Additionally, derived chirp Z-transform algorithm enables us to utilize the zoom-in option on the pulse signal in few nano-seconds below. Thus, it is possible to analyze the pulse signal distortion, delay or dispersion characteristics.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.9-10
• /
• 2015

본 논문에서는 전자기 유도의 동일 원리를 기반으로 하는 무선전력전송(WPT, Wireless Power Transfer)와 인덕션 히팅(IH, Induction Heating) 기술을 융합하기 위한 고효율 중전력(100W~2.4kW) 시스템을 제안한다. 제안하는 시스템은 고효율 PFC 컨버터와 무선전력 전송 및 IH렌지 겸용 고주파 인버터로 구성된다. PFC 컨버터는 단위역률과 동시에 고효율을 달성할 수 있는 Bridgeless PFC로 구성하였으며 인버터는 중전력 및 넓은 출력 범위를 지니는 Full-Bridge 인버터로 구성하였다. 무선전력전송과 IH렌지를 위한 송/수신부 코일 구조를 개발하였으며 최대 전력 전송을 위한 공진회로를 개발하였다. 중전력에서 고효율 및 시스템 안정성을 기반으로 하여 국내외 규제를 만족하는 시제품을 제작하여 상용화 가능성에 대한 확인을 목표로 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.73.2-73.2
• /
• 2010

휴대용 전자기기들의 소비전력 증가에 따라 2차전지에 비해 에너지 밀도가 높은 연료전지를 이용한 충전기의 필요성이 부각되고 있다. 대다수의 충전기는 On-Grid 방식으로 벅타입 컨버터를 이용한 감압 방식이었으나, 연료전지를 이용할 경우 승압식 컨버터를 통한 배터리의 충전이 요구된다. 또한 배터리는 일반 저항부하와 달리 큰 커패시턴스 성분을 가지고 있기 때문에 컨버터의 출력단에 인덕터가 없는 경우 큰 출력 리플전류를 유도하게 되어 시스템의 효율과 배터리의 수명에 좋지 않은 영향을 끼치게 된다. 또한 이를 해결하기 위해 절연형 감압 컨버터를 사용하는 경우 변압기 사용에 의한 부피 증가와 부가 소자의 사용에 따른 가격 상승을 피하기 어렵다. Cuk 컨버터는 주스위치의 ON/OFF 동작에 관계없이 출력으로 에너지가 항상 전달되며, 이상적으로 리플이 거의 존재하지 않아 충전용으로 적합하다. 또한, 승압 및 감압이 자유롭기 때문에 배터리의 정격전압에 상관없는 범용 충전기의 설계도 가능하다. 따라서 본 논문에서는 Cuk 컨버터를 이용하여 배터리 충전기를 설계하고, 그의 상태공간 모델링, 주파수 특성 해석 및 제어기 설계에 대해 기술한다. 제안된 제어 방식은 소형 연료전지 스택을 이용하여 실제 배터리를 대상으로 한 정전류 및 정전압 제어를 실행하여 그 성능 및 안정성을 검증한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.877-887
• /
• 2015

In this paper, a design of communication joint tools to implement a legacy-line communication (LLC) system, which exploits various conductive lines in a train, is presented. We develop two kinds of joint tools; one is a conductive joint tool (CJT) that is connected directly to the conventional lines and the other is the inductive joint tool (IJT) which connects the conventional lines indirectly using electromagnetic induction. As a result, the practical experiment of data communication confirms that an LLC system with the developed joint tools has a transmission rate more than 20 Mbps in the distance of 200 m away. In addition, an environmental durability test shows that the joint tools operate stably in an extreme environmenal variation. It is, therefore, considered that the developed joint tools are very useful to implement a communication network in the train working currently.

• Analytical Science and Technology
• /
• v.13 no.4
• /
• pp.474-483
• /
• 2000

An inductively coupled plasma atomic emission spectrometer/shielding system was specially designed and built for the analysis of radioactive materials. Both of an inductively coupled plasma source and a sample transfer system to be contacted with radioactive materials was installed in a stainless steel glove box. In terms of analytical capability and radiation safety, characteristic feature of the system was investigated. Its applicability to the determination of fission products and corrosion products in the radioactive materials such as spent fuel dissolver solution and the primary coolant of nuclear power reactors was evaluated. In the concentration range $0.01-0.1mgL^{-1}$, the relative standard deviation was found to be less than 5%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.1049-1055
• /
• 2018

This paper proposes the Signal Quality Indicator (SQI) to certify the wired communication channels connected between sub-systems embedded in guided flight systems. The communication signals can be distorted due to the poor interconnections of wired channels, the interference from the signals passing through the adjacent routed channels, and additive white Gaussian noises. As the ways to find out the condition of the communication channels, we present the Hamming distance based SQI (H-SQI) and the Euclidean distance based SQI (E-SQI). Two SQIs are compared in terms of the SQI resolution performance and the required number of hardware resources for implementations. The E-SQI requires the 10 times FPGA resources and an additional analog-digital converter over the H-SQI in spite of its outstanding SQI resolution performance. Moreover, the H-SQI could have the enough SQI resolution performance to find out the channel condition by increasing the oversampling rate, so the H-SQI is the more adequate than the E-SQI for the SQI of the guided flight systems.