• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.349-356
• /
• 2015

Air Defense Command Control and Alert(ADC2A) system is a system that ensures simultaneity and integrity of air defense operations by combining sensors, weapons and Command and Control(C2) systems over a tactical network to protect forces, facilities and strategic points from enemy's air attack. Improving message processing speed is a very important factor for ADC2A, because it uses high frequency bit-processing of the Army standard KVMF message to communicate with internal and external systems. In this paper we proposed improved method of KVMF message processing for ADC2A system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.942-945
• /
• 2000

Recently, electret applications have placed the focus on polymer thin film because electrical properties of a blend are studied. In this paper, we hale measured the infra sonic frequency by using Electret Sensor. Electret is formed by appling the voltage range of -4[kV] to -8[kV] to PTFE film and the sensor is manufactured by moment method to detect the infra-sonic signal. Electret Infrasonic Transducer, which is designed and manufactured by using of the moment method according to the potential and electric field simulation , shows its promising result, since the average rising rate of sensitivity is 7.68 [dB/oct] under 1[Hz], and the average values are within ${\pm}$ 1 [dB/oct]. As a result, it is believed that the characteristics of acquired transducer can be applied to the medical treatment, the industry, and the animal life researches, and also the study on noise elimination is required.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.557-560
• /
• 2020

최근, 광소자에서 공간 변조되는 wavefront profile 특성을 광소자의 표면 단차 변화 없이 단일 두께 박막 상에서 자유로이 구현할 수 있는 기하위상 홀로그램 (geometric phase hologram) 기반의 optical component에 대한 관심이 증대되고 있다. 특히 이를 이용해 제작된 기하위상 렌즈 (geometric phase lens)는 dynamic phase의 공간적 차이에 의해 구현되던 기존 bulk optics 기반의 lens 대비 초박형으로 제작이 가능한 파장 선택적 flat optics 기술로써, 다초점 및 경량화를 요구하는 차세대 디스플레이 기술 (augmented reality 또는 AR, mixed reality 또는 MR) 및 광파변조 및 제어를 요구하는 홀로그래픽 카메라 분야에 대한 응용처로 많은 주목을 받고 있다. 이에 본 논문에서는 해당 기하 위상렌즈에 대한 원리 및 이에 따른 개발이슈 및 해결법에 대해 연구 하였으며, 이에 대한 응용처로 기하위상 렌즈의 편광에 따른 이중초점특성을 이용해, 기존 단일 초점 형성이 가능한 AR기기 대비, 다초점 형성이 가능한 switchable dual-depth 3D AR device를 compact한 모듈과 함께 구현하였다. 또한, 기하위상렌즈의 광파 변조 및 분리특성을 이용한 기하위상 렌즈기반의 자가간섭 홀로그래픽 시스템(GP-self-interference incoherent digital holographic, GP-SIDH)에 편광 이미지센서 적용과 함께 맞춤형 설계/제작된 기하 위상렌즈를 적용함으로써, 기존 GP-SIDH 시스템대비 안정적으로 실시간 복소 홀로그램 획득이 가능한 실시간 공간영상정보 획득용 GP-SIDH을 동영상 프레임으로 구현하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.6
• /
• pp.500-509
• /
• 2007

In this paper, we propose a novel pc-based 8-channel USB interface digital multi-controller (DMC) has capacity to be able to adjust ultrasonic motor's (USM's) the parameters-frequency, amplitude, phase difference using FPGA. The proposed DMC can control parameters directly by digital logic through a FPGA. Since it has counter circuit for rotary encoder to measure position and velocity of USM, the other separate circuits are unnecessary. Therefore, it could reduce the size of controller and the production cost. Finally, to verify the performance of proposed DMC, we tested the speed characteristic of two types USM with no-load as adjusting the parameters.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.57-63
• /
• 2016

This paper describes implementation of the RF frequency synthesizer with $0.18{\mu}m$ silicon CMOS technology being used as an application of the IEEE802.15.4g SUN sensor node transceiver modules. Design of the each module like VCO, prescaler, 1/N divider, ${\Delta}-{\Sigma}$ modulator, and common circuits of the PLL has been optimized to obtain high speed and low noise performance. Especially, the VCO has been designed with NP core structure and 13 steps cap-bank to get high speed, low noise, and wide band tuning range. The output frequencies of the implemented synthesizer is 1483MHz~2017MHz, the phase noise of the synthesizer is -98.63dBc/Hz at 100KHz offset and -122.05dBc/Hz at 1MHz offset.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.161-161
• /
• 2010

n-type 반도체 특성을 띄는 $SnO_2$ 나노선은 가스 센서, 투명 소자, 태양광 전지 등으로 널리 사용되고 있다. 본 연구에서는 화학기상증착법으로 성장한 $SnO_2$ 나노선으로 폴리이미드 (PMDA-ODA: PI) 박막을 게이트 절연막으로 이용한 전계효과트랜지스터를 플렉서블 기판에 제작하고 전기적 특성을 분석하였다. 전자 전달 특성 곡선으로부터 n-형의 반도체 특성을 확인하였으며, 대부분의 산화금속 나노선에서와 같이 매우 큰 전기적 히스테리시스가 관찰되었다. 산화금속계통 나노선 소자의 히스테리시스는 나노선 표면에 산소 및 물 분자가 흡착되어 생기는 전자 갇힘 현상이 가장 큰 원인으로 알려져 있는데, 이러한 히스테리시스를 조절하거나 없애는 것은 소자의 특성 향상에 있어 매우 중요하다. 한편 PI 절연막에는 느린 분극 현상을 만드는 OH 반응기가 존재하기 때문에 나노선과는 반대 방향의 히스테리시스를 보일 것으로 예상된다. 본 연구에서는 제작된 $SnO_2$ 나노선 FET에서 PI 게이트 절연막의 경화 정도에 따른 히스테리시스를 조사하였다. FT-IR 측정에 따르면, PI 필름에 존재하는 OH 반응기는 PI를 경화시킴에 따라 감소하였으며 전기적인 히스테리시스도 감소하였다. 따라서, 절연막을 경화시키지 않았을 때는 PI 내부에 다량의 OH 반응기가 존재하여, PI의 히스테리시스가 나노선 히스테리시스보다 더 크게 작용하여, 전체적으로는 PI의 특성인 반시계 (counterclockwise) 방향의 히스테리시스를 나타내었다. 한편, 절연막을 완전히 경화시키면, OH 반응기는 대부분 사라지고 나노선의 히스테리시스만 발현되어 소자는 시계방향의 히스테리시스를 보였다. 이러한 실험결과를 통해, PI 박막을 $250^{\circ}C$ 에서 약 7분간 경화시켰을 때 나노선과 절연막의 히스테리시스가 가장 이상적으로 상쇄되어 전체적으로 히스테리시스가 매우 작아진 것을 관찰할 수 있었다. 이는 향후 나노선 FET의 안정적인 응용에 매우 유용한 결과로 활용될 것으로 예측된다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.88-95
• /
• 2011

In this paper, a new standby-mode control method for multiple output switching-mode power-supply is suggested, which uses the control signal of the feedback compensator of the inner loop in the linear voltage regulator located at the transformer secondary side, as the load current information. Conventional method has a problem that standby mode occurs depending only on the load condition of the main controller output, which makes the other secondary side output very inaccurate by burst mode operation. The proposed method detects all the load current information and operates in burst mode only when the all of them are light load condition. Minimum of the additional components are required for the implementation of the proposed method because the load information is obtained from the existing feedback circuit of the post-stage linear regulator. In this paper, the operating principles of the proposed standby-mode circuit are presented with an numerical analysis, and are verified by 25W hardware prototype implementation.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.762-765
• /
• 2021

In this paper, an automotive ECU (electronic control unit) with Kalman filter accelerator is designed and implemented. RISC-V is exploited as a processor core. Accelerator for Kalman filter matrix operation, CAN (controller area network) controller for in-vehicle network, and LIN (local interconnect network) controller are designed and embedded. Kalman filter operation consists of time update process and measurement update process. Current state variable and its error covariance are estimated in time update process. Final values are corrected from input measurement data and Kalman gain in measurement update process. Usually floating-point multiplication is exploited in software implementation, but fixed-point multiplier considering accuracy analysis is exploited in this paper to reduce hardware area. In 28nm silicon fabrication, its operating frequency, area, and gate counts are 100MHz, 0.37mm², and 760k gates, respectively.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.15-21
• /
• 2017

In order to satisfy the graduation requirements, the graduation work should be presented as an engineering dissertation system of the produced work and an outline of the procedure made by the major unit in accordance with the graduation thesis submission rules, and suggests necessary matters for improvement. The design content relates to a small unmanned aerial vehicle configuration for detecting personnel or objects in a disaster area. It is equipped with an infrared sensor and a GPS in the drone, the drone is control by using Blutooth communications. The drones detect the target and use the GPS to determine the location. As a result of the experiment, it was possible to detect the structure object within the range of 3~4 m, confirm the transmission of the position value in real time, and increase the communication distance by using RF communication.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.6
• /
• pp.506-513
• /
• 2009

In this paper, we propose a bi-directional communication method applying time reversal technique in underwater acoustic channel in order to exchange data between sensor nodes with an available relay node. The proposed method reduces the conventional 4-step relaying procedure to 2-step and improves the system capacity. Moreover, it increases transmission range efficiently while the relay node can be implemented with low complexity. Simulation results demonstrate that the proposed scheme achieves 3.2 bps/Hz higher capacity than that of the conventional method at SNR 20 dB.