• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.224-226
• /
• 2008

본 논문에서는 매트릭스 컨버터로 구동되는 유도전동기의 속도제어 성능을 향상시키기 위한 적응제어 기법을 제안한다. 유도 전동기는 비선형적 마찰력 등으로 인한 비선형적 특성을 가진다. 이러한 비선형적 특성으로 인해 야기되는 왜곡을 보상하고 속도제어 성능을 개선하기 위해 슬라이딩 모드 제어 기법을 적용한다. 슬라이딩 모드에서 발생하는 채터링 현상과 모델링되지 않은 유도 전동기의 불확실성에 의한 제어 성능 저하를 개선하기 위해, 불확실성 추정을 위한 퍼지 기반 불확실성 추정기를 적용한다. 시뮬레이션을 통해 제안한 제어기법의 타당성을 검증한다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.429-430
• /
• 2016

농업용 하우스의 온방장치로 기존의 경유식 온풍기 구조에서 전기식 온풍기 구조로 바뀌고 있으며, 전기식 온풍기의 경우 멸균을 겸하는 고주파 유도가열 온풍기 적용에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 자동공진 추정기법을 이용한 정격 시 공진형 영전류 스위칭 방식이 이루어질 수 있고, 온풍기 특성에 맞는 새로운 주파수제어 영역을 사용하여 제어하였다. 또한 새롭게 제안하는 공진점 추종 제어 기법을 사용한 유도가열 시스템을 구현 하여, 이에 대한 시뮬레이션과 실험을 통하여 타당성을 증명하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.2
• /
• pp.125-130
• /
• 1998

This paper describes a novel flux calculator for the estimation of real rotor flux angle which is indispensable to the field oriented control of induction motors. A pure integrator is used to estimate the real rotor flux precisely from voltage and current information. The proposed flux calculator adopts the new drift compensation method to overcome the drift problem of pure integrator. The motor speed is calculated using estimated flux angle and estimated slip frequency. The performance of this approach is verified through the experiment. The experimental results shows stable operation of proposed system even below 1/100 of rated speed.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2280-2282
• /
• 2001

EMV(electromagnetic valve) 시스템은 자동차에서 기계식 캠을 사용하지 않고 전자기력을 이용하여 흡·배기 밸브를 작동시키고 타이밍을 조절하기 위한 것이다. 본 논문에서는 EMV 시스템을 위한 전자기와 기계적 모델을 사용하여 그에 대한 동역학 모델을 유도하였다. EMV 시스템의 최대 동작주파수가 가솔린 엔진의 최대 회전수 6000rpm에 대응한 valve의 주파수가 50Hz 되기 위한 제어기를 설계하였고, 실험을 통하여 문제점들을 파악하고자 한다.

• 전기의세계
• /
• v.50 no.2
• /
• pp.8-14
• /
• 2001

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.463-469
• /
• 2018

A currently used roof green system with multi layers has a low constructability. Therefore a new integrated waterproof & root barrier sheet and roof green box unit system was developed using steel plate fixture and cone type fixture by electromagnetic induction heating method. This study was proceeded to evaluate adhesion performance of two types of fixtures on Engineering PE, TPO, PVC sheet in a normal condition, repeated heating and cooling condition. As a result, adhesion load on Engineering PE sheet showed the highest value. The adhesion loads of steel plate fixture showed higher value as heating temperature was getting higher. However adhesion loads of cone type fixture showed opposite tendency. Regarding to the test conditions, test results of normal condition, repeated heating and cooling condition showed same value. The cone type fixture using butyl tape showed 7 times lower adhesion load than that of cone type fixture using electromagnetic heating and 28% lower adhesion load in a repeated heating and cooling condition than a usual condition.

• Journal of Chest Surgery
• /
• v.31 no.4
• /
• pp.398-401
• /
• 1998

A 56-year-old female with a permanent unipolar pacing(VVI) system underwent elective coronary bypass surgery and mitral valve replacement. Because the unipolar sensing is subject to considerable nonmyocardial electrical noise, the pacing function may be disturbed by the use of electrocautery. Temporary atrial and ventricular bipolar epicardial leads and external generator were used for maintaining A-V sequential pacing during the use of electrocautery. Before aortic cross-clamp was released after cardiac operation, regular cardiac rhythm could spontaneously be resumed with an integrated cardioplegic strategy, avoiding the use of defibrillator

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.37-46
• /
• 2006

In this study, the efficacy of the newly developed smart passive control system to improve seismic performance of base isolated building structures is numerically verified. The smart passive control system consists of a magnetorheological (MR) damper and an electromagnetic induction (EMI) part. The damping characteristics of an MR damper can be controlled by the current generated in an EMI part according to the Faraday's law of electromagnetic induction. An EMI part consisting of a permanent magnet and a solenoid coil could substitute a control system including sensors, a controller and an external power supply in a conventional smart control system. The benchmark control problem for a base isolated building presented by the american society of civil engineers is considered for numerical simulation. The control performance of the smart passive control system is compared to that of the conventional smart control system using MR dampers. It is demonstrated from the numerical simulation results that the smart passive control system is useful to improve the seismic performance of base isolated buildings.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.1-3
• /
• 2007

본 논문에서는 순시정전 직후 재운전 혹은 외력에 의하여 전동기가 회전하고 있을 때 인버터에 의한 유도 전동기의 재기동 알고리즘을 제안한다. 제안한 알고리즘은 전류 제어기의 오차에 포함된 리플 성분을 이용하여 속도 센서 없이 회전 속도를 추정하는 방법에 대해 고찰하며 시뮬레이션 및 유도 전동기를 이용한 실험을 통하여 재기동 알고리즘의 타당성을 입증한다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.72-83
• /
• 2000

This paper presents the implementation of the position control system for 3 phase induction motor using reaching mode controller and neural networks. The reaching mode controller is used to bring the position error and speed error trajectories toward the sliding surface and to train neural networks at the first time. The structure of the reaching mode controller consists of the switch function of sliding surface. And feedforward neural networks approximates the equivalent control input using the reference speed and reference position and actual speed and actual position measured form an encoder and, are tuned on-line. The reaching mode controller and neural networks are applied to the position control system for 3 phase induction motor and, are compared with a PI controller through computer simulation and experiment respectively. The results are illustrated that the output of reaching mode controller is decreased and feedforward neural networks take charge of the main part for the control action, and the proposed controllers show better performance than the PI controller in abrupt load variation and the precise control is possible because the steady state error can be minimized by training neural networks.