• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.217-225
• /
• 2024

Even after the introduction of Global Maritime Distress and Safety System (GMDSS), many maritime accidents occur. A method of transmitting a rescue signal when a person falls into the water from a ship is currently being researched and developed in various ways, but no products have been developed that use frequencies allocated for maritime mobile service. Accordingly, in this study, we designed and produced a man-over-board (MOB) device by applying Group B AMRD technologies, which were adopted through the latest revision of the International Telecommunication Union (ITU). In addition, a receiver and user interface were built to verify the performance of the transmitter, and we confirmed that it can be used in conjunction with existing electronic charts. This MOB device satisfies the general and technical requirements of Group B AMRD using AIS technology and uses integrated components for miniaturization for easy portability in a maritime environment. We expect that it will achieve excellent AIS communication and be essential in rapid response and safety in emergency scenarios.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.157-166
• /
• 2004

Recently, switchboards for MV/LV distribution customers have been united and digitalized rapidly. This paper suggestes the effective information visualization method for the data mesured from cubicle switchboard for MV/LV distribution customers. We developed the algorithm that analyzes a large number of mesured data and displays them to users overall, such as fire index, power condition index, switchboard safety index, and power diminution index. Using a touch screen made users to operate it easily. User interface was also strengthened by taking graph visualization. We guess the information visualiztion method suggested in this paper shows the new direction that heavy electrical equipments including switchboards are going to develop in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.439-442
• /
• 2014

The previous wearable computing researches have been taken the deficiency of global view about ubiquitous integration. They have approached the skewed directions and approaches for the wearable ubiquitous computing. Therefore we propose a more advanced global architecture model and a general service cycle. This paper firstly proposes an architecture design of computing life cycles in digital garment environments. Then it also provides the process cycles for supporting general services in digital garment applications. Finally, we present the important design consideration issues for implementing a digital garment system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.215-218
• /
• 2016

The robot performs with combined various functional equipments organically. OPRoS (Open Platform for Robotic Services) is a framework to provide integrated development environment to develop an equipment in the form of the component parts to various institutions and developers and to combine them. To ensure the reliable operation of the robot, the developer should test the component can be coupled reliably with other components developed by other developers. First of all, that the search to find components to be coupled with the component meaningfully is necessary. In this paper, we propose the interoperability evaluation system which can find components to be meaningfully coupled with the component to be evaluated.

• Journal of Korea Multimedia Society
• /
• v.16 no.2
• /
• pp.138-146
• /
• 2013

In this paper, we propose a new 3D PUI(Physical User Interface) system in which the index fingertip points and moves a mouse position on a given monitor screen. There are two 3D PUI schemes to control smart devices like smart TVs remotely, the relative pointing one and the absolute pointing one. The former has a problem in that it does not match the human perception process, and the latter requires excessive movement of the body. We combined the relative one and the absolute one, and develop a new intuitive and user-friendly pointing method, 3D PUI. It requires an establishment of a pyramid shape visible area (view volume) to point a mouse position on a screen with the dominant eye. In order to maintain the real-time view volume, however, it requires large computation depending on the movement of the dominant eye. We optimized the computation of the view volume in which it determines the internal and external position on the screen. In addition, Kalman filter is applied with tracing of the mouse pointer position to stabilize the trembling of the pointer and offers the user ease of use.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.8
• /
• pp.45-52
• /
• 2011

Flash memory is becoming widely prevalent in various area due to high performance, non-volatile features, low power, and robust durability. As price-per-bit is decreased, NAND flash based SSDs (Solid State Disk) have been attracting attention as the next generation storage device, which can replace HDDs (Hard Disk Drive) which have mechanical properties. Especially for the single package SSD, if channel number or FIFO buffer size per channel increases to improve performance, the size of a controller and I/O pin count will increase linearly with channel numbers and form factor will be affected. We propose a novel technique which can minimize form factor by optimizing the number of NAND flash channels and the size of interface FIFO buffer in the SSD. For SSD with 10 channel and double buffer, the experimental results show that buffer block size can be reduced about 73% without performance degradation and total size of a controller can be reduced about 40% because control block per channel and I/O pin count decrease according to decrease channel number.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.152-158
• /
• 2016

In this paper, we implemented the full stack platform design with MongoDB database of open source platform Raspberry PI 3 model. We experimented the triggering of event driven with acceleration sensor data logging with wireless communication. we captured the image of USB Camera(MS LifeCam cinema) with 28 frames per second under the Linux version of Raspbian Jessie and extended the functionality of wireless communication function with Bluetooth technology for the purpose of making Android Mobile devices interface. And therefore we implemented the functions of the full stack platform for recognizing the event triggering characteristics of detecting the acceleration sensor action and gathering the temperature and humidity sensor data under IoT environment. Especially we used MEAN Stack for developing the performance of full stack platform because the MEAN Stack is more akin to working with MongoDB than what we know of as a database. Afterwards, we would enhance the performance of full stack platform for IoT clouding functionalities and more feasible web design with MongoDB.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.6
• /
• pp.133-141
• /
• 2008

As interactive multimedia have come into wide use, user interfaces such as remote controllers or classical computer mice have several limitations that cause inconvenience. We propose a vision-based pointing device to resolve this problem. We analyzed the moving image from the camera which is embedded in the pointing device and estimate the movement of the device. The pose of the cursor can be determined from this result. To process in the real time, we used the low resolution of $288{\times}208$ pixel camera and comer points of the screen were tracked using local optical flow method. The distance from screen and device was calculated from the size of screen in the image. The proposed device has simple configurations, low cost, easy use, and intuitive handhold operation like traditional mice. Moreover it shows reliable performance even in the dark condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.10
• /
• pp.966-982
• /
• 2014

This paper presents recent trends in system-level EMC investigation and countermeasure technology for radio frequency interference (RFI) influenced by noise generated in high-speed digital system. Recently, as the only digital device can perform various roles, there are a variety of EMI/EMC problems between systems. Especially, RFI is now recognized as a major problem, which occurs by EMI caused by the digital system. Therefore, in this paper, recent trends of RFI investigation from component-level to system-level are introduced and analyzed. Furthermore, in order to solve the RFI problem, recent researches are presented and investigated for the occurrences and suppression methods of common-mode noise which is one of the major noise sources in high-speed digital system. Lastly, this paper suggested future research of system-level EMC analysis and countermeasure technology for RFI problems.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.430-435
• /
• 2008

Thanks to the development of IT technology, there have been developed a variety of types of portable music players. IT technology didn't stop there, however. It has gone to developing GUIs (Graphic User Interfaces) to deliver more information to the user. As the function of GUIs has become important, the music players are being required to show characteristics of the sounds they output visually beyond just delivering the sounds through analyzing the information that the sounds contain. To visualize the information of sounds, that is to say, has become substantial. In this process, sound graphic equalizers have been developed in order. The object of this study is to produce a new sound graphic equalizer with new forms of expressing visual images of sounds besides the bar graphs, in which user feedback is possible. This study has devised a new sound visualization form in visually expressing the information of sounds by analyzing their characteristics. This new sound visualization provides a sound graphic equalizer with which the user can select images for the information of the sounds s/he listens. This study suggests a new alternative GUI with which the user can change the form of the outputted images in realtime as communicating with the player.