• Journal of Astronomy and Space Sciences
• /
• v.24 no.4
• /
• pp.397-408
• /
• 2007

Diplexer is one of core devices needed to communicate with satellite using single ground antenna by separating uplink and downlink signal. This paper presents the design of the S-band diplexer for LEO TT&C application, especially for KOMPSAT (KOrea Multi-Purpose SATellite). To cope with requirements such as high handling power, low insertion loss, air-cavity resonator with high quality factor was considered as one of design drivers. Design was started with predicting unloaded Q and equivalent circuit from the structure of air-cavity resonator. For the convenience of adjustment, the coupling factor placed between resonators was estimated from COTSEM (Electro-Magnetic) simulator, EESOF $ADS^{TM}$, and expressed with 2-order polynomial regression. To improve the isolation between transmitting part (Tx) and receiving part (Rx), the inductive and capacitive attenuation poles were inserted between $4^{th}\;and\;6^{th}$ resonator respectively. The fabricated diplexer consists of two bandpass filters and each filter has eight resonants. From the measurement, it was shown that major requirements such as 0.5dB of insertion loss, 20dB of return loss and 100dB of isolation were fully satisfied within passband.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.91-97
• /
• 2012

Recently, the performances of electrical and electronic devices are improving while the sizes are becoming smaller. As sound-generating systems, the two-dimensional speakers have been developed in place of conventional three-dimensional ones. Piezoelectric materials show the mechanical vibrations due to the voltage applied from outside the materials. The early film speakers had a limitations of output power in that it was not easy to make the conducting macromolecular films on the surfaces of the materials due to the internal chemical properties of materials. We have adopted the corona surface treatment in order to improve the output characteristics by increasing the adhesion of the coating material on to the surface of the center material of piezo film. The results showed the improvement of output power in the wider range of operating frequencies.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.33-42
• /
• 2011

In this paper we designed and implemented a wireless communication circuit which can control the remote devices integrating RFID and ZigBee. This system unifies transmit part and receive part. And this system recognizes RFID tag data, then the recognized information is controlled by MCU, and transmitted to a remote device through the ZigBee. This is operated on TinyOS. If this system is applied to a entrance security system, it can permit/deny one's entrance as well as control the personal computer or other electronic devices. Our experiment shows the result of the recognized data transmission is very different according to a opened playground and a closed place. The data transmission time is stable in the indoor and the data transmission distance is long in the outdoor. We anticipate that our system be applied the various office oriented domains by connecting to the Wired LAN or the WLAN of IEEE 802.11x category.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.113-113
• /
• 2012

플라즈마 내에서 발생하는 입자는 플라즈마 내 전기적 및 화학적 특성으로 인해 응집이 적고 균일한 특성을 가진다. 이에 따라 도포성이 좋으며 낮은 응력을 가지는 박막의 형성이 가능하다. 이러한 특성을 가지는 나노입자는 메모리, 고효율 박막형 태양전지 등에 이용될 수 있다. 특히, PECVD (Plasma enhanced chemical vapor deposition) 공정 중 플라즈마가 켜져있는 동안 수소 가스를 펄스형태로 추가 주입하는 방법은 실리콘 이온 사이의 결합을 통한 표면 성장을 일부 방해하여 이를 통해 최종적으로 생성되는 실리콘 입자의 크기제어를 가능하게 한다. 이러한 과정으로 PECVD내에서 생성된 입자의 입경 분포는 기존의 경우 공정 중 포집을 한 후 전자현미경을 이용하였지만 실시간 측정이 불가능한 한계가 있었고, 레이저를 이용한 실시간 측정은 그 측정범위의 한계로 인해 적용에 어려움이 있었다. 이에 따라 본 연구에서는 저압에서 실시간으로 나노입자 크기분포 측정이 가능한 PBMS (particle beam mass spectrometer)를 이용하여 PECVD 내에서 수소가스 펄스를 이용하여 발생되는 실리콘 입자를 공정 변수별로 측정하여 각 변수에 따른 입자 생성 경향을 분석하였다. 실리콘 나노 입자의 측정은 PBMS 장비의 전단 부분을 PECVD 장치 내부에 연결하여 진행하였다. 수소 가스 펄스를 이용한 실리콘 입자 생성의 주요 변수는 RF pulse, $H_2$ pulse, 가스 유량 (Ar, $SiH_4$, $H_2$), Plasma power, 공정 압력 등이 있다. 이와 같이 주어진 변수들의 제어를 통해 생성된 나노입자의 입경분포를 PBMS에서 실시간으로 측정하고, 동일한 조건에서 포집한 입자를 TEM 분석 결과와 비교하였다. 측정 결과 각각의 변수에 대하여 생성되는 입자의 크기분포 경향을 얻을 수 있었으며, 이는 추후 생성 입자의 응용 분야에 적합한 크기 분포 특성을 가지는 실리콘 입자를 제조하기 위한 조건을 정립하는데 중요한 역할을 할 것을 기대할 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1616-1626
• /
• 2010

This paper will show how self-alarming EAS(Electronic Article Surveillance) system can improve its receiving performance of magnetic field signal and reduce false alarm using dual-band wireless communication. Our research improved the receiving performance and the areas of recognition of magnetic signal through the change of VLF receiving circuit and alarm transmitting method. In addition, we verified the reduction of false alarm by improvement of integrity and distance between tag and receiver through experiment. Thanks to our research, we can build the high performance and economical EAS with low false alarm on the multi gate store.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5208-5213
• /
• 2011

In this paper, we proposed a new direction finding(DF) technology using TDOA(time-difference of arrival) and PDOA(phase difference of arriving signal) method. The proposed technology has a good DF accuracy without DF ambiguity. TDOA or PDOA technology is used to the most of intelligence systems in 21 century. The principle of TDOA is to receive a signal with two parallel antennas, measure the time difference of arrival signal, and converse the time difference to the direction of incident signal. Those technology make a DF system small size but the DF accuracy is low into short antenna installation distance. The principle of PDOA is similar to TDOA except measuring the phase difference of arrival signal, These technology get a good DF accuracy in short antenna installation distance but have a DF ambiguity. The proposed DF method is simulated into DF system operation environment with noise, and has a good DF accuracy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.807-808
• /
• 2016

With the recent rise in nuclear families and single-member families, there is a need for the kind of home management unaffected by neither space nor time. Moreover, electronic devices in and around the home need to be managed efficiently and prevented from overheating, and there is an increasing risk of fire, theft, and leak of personal data with these devices, which is leading to an increase in the economic costs. Accordingly, there is a growing need for an efficient and secure smart home management system. This paper proposes a home management system that uses smart devices. This system has addressed the shortcomings of a conventional Internet-based home network. Furthermore, it communicates with IoT-enabled devices and features intelligent information home appliances that are isolated from personally identifiable information and which are secure against advanced persistent threats, a type of cyber-attack.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.5
• /
• pp.47-57
• /
• 2006

The shear wave velocity is related with the stiffness of granular skeleton and mass density. The shear stiffness of the granular skeleton remains unaffected by the presence of the fluid. Bender elements are convenient shear wave transducers for instrumenting soil cells due to optimal soil-transducer coupling. This study addresses the principles of the shear wave, the design and implementation of bender elements including electromagnetic coupling prevention, directivity, resonant frequency, detection of first arrival, and near field effects. It is shown that electromagnetic coupling effects can be minimized using parallel-type bender elements. Thus, the in-plane S-wave directivity is quasi-circular. The resonant frequency of bender element installations depends on the geometry of the bender element, the anchor efficiency and the soil stiffness. One of the most cumbersome parts in the bender element test is near field effects, which affect the selection of arrival time. The selection of the first arrival within the near field Is effectively solved by the multiple reflection technique and signal matching technique. Bender elements, which requires several considerations, may be effective tools for the subsurface characterization by using S-wave.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.639-647
• /
• 2023

A variety of communications are developed and advanced by integration of wireless and wire connections with heterogeneous system. Traditional technologies are mainly focus on information technology based on computer techniques in the field of industry, manufacture and automation fields. As new technologies are developed and enhanced with traditional techniques, a lot of new applications are emerged and merged with existing mechanism and skills. The representative applications are IoT(Internet of Things) services and applications. IoT is breakthrough technologies and one of the innovation industries which are called 4 generation industry revolution. Due to limited resources in IoT such as small memory, low power and computing power, IoT devices are vulnerable and disclosed with security problems. In this paper, we reviewed and analyzed security challenges, threats and requirements under IoT service.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.3
• /
• pp.49-53
• /
• 2001

Vortical etching experiments of ($SrBi_2Ta_2O_9$)/Si thin films have been performed by using the inductively coupled plasma reactive ion etching (ICP-ME) apparatus. The purposes of these experiments are to get the effective area of vertical surface. Because this technology is very important to get good qualities of ferroelectric gate structure, capacitor and the minimum parasitic effects related to the excellent performances of the FRAM (Ferroelectric Random Access Memory) device. The reacting gases were Ar and $Cl_2$gases, and various $Ar/C1_2$flow ratios were used. The etching experiments were carried out at various RF powers such as 700, 700, 500W and at various DC powers such as 200, 150, 100, 50W, respectively. The maximum etch rate of $SrBi_2Ta_2O_9$/Si thin films was 1050 A/min at the $Ar/C1_2$ gas ratio of 20/16, RF power of 700 W and DC power of 200 W. From the SEM (scanning electron microscopy) image of the SBT thin films, the wall angle was as good as about $82^{\circ}$.