• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.198-205
• /
• 1979

A valence bond method of calculation of the dipole moments for octahedral $(M(III)0_3S_3)$ type complexes are developed, using $d^2sp^3 $hybrid orbitals of the central metal ions and the single basis set orbital of ligands. (M (III) =V (III), Cr (III), Mn (III), Fe (III), Co (III), Ru (III), Rh (III) and OS (III)). In this method the mixing coefficient of the valence basis sets for the central metal ion with the appropriate ligand orbitals is not required to be the same, differently from the molecular orbital method. The valence bond method is much more easier to calculate the dipole moments for octahedral complexes than the approximate molecular orbital method and the calculated results are also in the range of the experimental vaues.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.4
• /
• pp.283-288
• /
• 2019

In this paper, there is summarized the validation of ground test results through the telemetry acquired during on-orbit initial activation on solar-array drive assembly(SDA) of GK2A launched at Dec-5, 2018. Especially, the decision logic of SDA initial position and the compensation logic are validated and confirmed. The SDA initial position is needed when GK2A enter to geostationary orbit from transfer orbit and the compensation logic is for the accumulated position error due to the open-loop control. Up to now, it is normal operating. Also the periodic offset between the geostationary orbit and Sun position is found that it is not checked on design phase, and then the proper threshold value is applied.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.58-59
• /
• 2004

• Satellite Communications and Space Industry
• /
• v.13 no.1 s.28
• /
• pp.72-80
• /
• 2006

통신해양기상위성은 기상관측, 해양관측 및 통신방송의 3가지 임무를 수행하는 정지궤도 복합임무 위성이다. 위성본체는 기존의 화성탐사선(Mars Express) 위성의 구조를 확장하여 새로 개발한 구조체에 기존의 E3000 통신위성 버스에 사용하였던 전기전자 부품 및 추진계를 사용한다. 3축제어 위성으로서 태양전지판은 한 쪽에만 부착되어 있으며, 반대쪽에는 종래의 기상위성이 모멘트 균형을 위하여 갖고 있었던 솔라세일(solar sail)을 갖고 있지 않다. 기상탑재체는 미국의 아이티티(ITT)가 제작 공급하고, 해양탑재체는 이에이디에스 아스트리움(EADS Astrium)사와 항공우주연구원이 공동으로 개발하며, 통신 탑재체는 전자통신연구원에서 개발한다. 지상국은 항공우주연구원이, 관제시스템은 전자통신연구원이 개발을 담당하고 있다. 개발의 전 과정이 해외협력 개발로 이루어진다. 설계는 프랑스의 뚤르즈 소재 이에이디에스 아스트리움(EADS Astrium)사에서 한국 기술진의 참여 하에 이루어지며, 조립 및 시험은 항공우주연구원의 시설을 이용하여 한국에서 이루어진다. 발사준비도 공동으로 수행하고, 발사 후 전이궤도운영은 아스트리움사의 지상국을 사용하여 수행하여 목표궤도에 진입시킨 후 항공우주연구원의 지상국에서 궤도 내 시험(in-orbit-test)를 완료한 후 위성을 인도 받는다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.1
• /
• pp.68-77
• /
• 2018

In order to analyze the overall characteristics of the lunar orbiter, the Variable Coast method, which can be launched everyday, is applied to the 3.5 phasing loop transfer trajectory. The mission scenario for the entire process from launching to entering the lunar orbit is set up and performed simulation by selecting the launch pad and launch vehicle. In particular, the SEM(Satellite-Earth-Moon) angle defined in Earth-Moon rotating frame is an important constraint to comprehensively evaluate the 3.5 phasing loop transfer trajectory. The simulation using SEM angle is analyzed from various viewpoints such as launch epoch, coast duration, perigee altitude and ${\Delta}V$ not only trans-lunar trajectory but lunar orbit insertions and the optimum SEM angle is suggested in this study. It is expected that this results will be helpful to evaluate the characteristics of the 3.5 phasing loop transfer trajectory according to the launch vehicle selection by comparison with Fixed Coast analysis results in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.11
• /
• pp.984-997
• /
• 2015

Chang'e-3 consisting of a lunar lander and exploration rover was launched on December 1, 2013 aboard a Long March 3B rocket flying from Xichang space launch center. Chang'e-3 was inserted into the lunar orbit after about a 5-day transit to the Moon and landed on the targeted landing site after orbiting around the Moon for 8 days. The successful landing of the Chang'e-3 gives a lot of help to analyze the future needs of the subsystem technologies and to figure out the trajectory from launch to lunar landing as well as operation sequences in the development of Korean lunar exploration is scheduled. Therefore, the configuration and analysis of overall mission of Chang'e-3 is performed based on the public information from the press and website. As a result, overall mission trajectory is reconstructed by solving boundary condition and then estimating control variable. Visibility status and eclipse status also analyzes so communication and power charge condition is as good as to operate lunar lander. Mass budget of the lander is derived using ${\Delta}V$ according to specific impulse.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.189-192
• /
• 2003

Electrical power in satellite system should persistently satisfy specified power requirement even though that happen the failure of solar array string or battery cell during the mission operation. In this study, the solar array and battery of GEO Communication Satellite with 3kW capacity are designed, and energy balance analysis according to power operation mode are performed to meet specified power capacity at the transfer orbit

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.1021-1032
• /
• 2011

This paper presents the results of a parametric study for the design of optimal Earth-Moon transfer trajectory using mixed impulsive and continuous thrust. Various types of the optimal Earth-Moon transfer trajectories were designed by adjusting the relative weight between the impulsive and the continuous thrust, and flight time. Two very different transfer trajectories can be obtained by different combination of design parameters. Furthermore, it was found that all thus designed trajectories permit the ballistic capture by the Moon gravity. Finally, the required thrust profiles are presented and analyzed in detail.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.89-97
• /
• 2011

This paper considers improved IGM (Iterative Guidance Mode), one of the explicit guidance algorithms, to determine the guidance algorithm for upper stages of a space launch vehicle. IGM, which has been employed successfully for the Saturn to put its payload into the parking orbit and lunar transfer orbit, is applied here for guidance of the launcher during the second and third stages. The orbit injection accuracy is evaluated through the 3-DOF computer simulations and an accurate prediction method, which can eliminate the prediction error of the downrange position at the orbit injection, is also proposed here.

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.119-123
• /
• 1995

Bridgman 방법으로 성장한 InSe: Co 단결정의 근적외 영역에서의 광흡수 특성을 상온에서 조사하였다. 1350, 1530, 1710nm 파장영역에서 Td 대칭을 갖는 Co2+ 이온의 4A2(4F)$\longrightarrow$4T1(4F)전이에 대응되는 3개의 흡수 peak를 관측하였다. 이 미세구조는 스핀-궤도 결합효과에 의하여 분리된 Co2+ 이온의 4T1(4F) 준위의 $\Gamma$6, $\Gamma$8, $\Gamma$7+$\Gamma$8 준위와 바닥상태 4A2(4F)의 $\Gamma$8 준위 사이의 전자전이에 기인하며, 결정장이론에 의하여 잘 설명되었다.