• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.167-175
• /
• 2019

To effectively deal with the fire in tunnel which is mostly the vehicle fire, it's more important to suppress the fire at early stage. In urban tunnel, however, accessibility to the scene of fire by the fire fighter is very limited due to severe traffic congestion which causes the difficulty with firefighting activity in timely manner and such a problem would be further worsened in underground road (double-deck tunnel) which has been increasingly extended and deepened. In preparation for the disaster in Korea, the range of life safety facilities for installation is defined based on category of the extension and fire protection referring to risk hazard index which is determined depending on tunnel length and conditions, and particularly to directly deal with the tunnel fire, fire extinguisher, indoor hydrant and sprinkler are designated as the mandatory facilities depending on category. But such fire extinguishing installations are found inappropriate functionally and technically and thus the measure to improve the system needs to be taken. Particularly in a double-deck tunnel which accommodates the traffic in both directions within a single tunnel of which section is divided by intermediate slab, the facility or the system which functions more rapidly and effectively is more than important. This study, thus, is intended to supplement the problems with existing tunnel life safety system (fire extinguishing) and develop the remote-controlled automatic fire extinguishing system which is optimized for a double-deck tunnel. Consequently, the system considering low floor height and extended length as well as indoor hydrant for a wide range of use have been developed together with the performance verification and the process for commercialization before applying to the tunnel is underway now.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.75-84
• /
• 2018

The inclusive playground is a playground where disabled children and non-disabled children can play together, not a playground for the disabled. It started with the change of social awareness of the citizenship rights of disabled people in the 1960s and the resulting playgrounds. Since then, inclusive playgrounds have been developed in many countries, and these are organized in the form by guidelines. In Korea, social interest in inclusive playgrounds is increasing, but there are no systematic guidelines in Korea, and the application of overseas cases or guidelines is limited. The purpose of this study is to classify the concept of inclusive playgrounds and design guidelines, that were previously presented in inclusive playground design guideline of various countries and analyze the characteristics of, design scope, and design principles, and provide a basic framework for creating guidelines. The purpose of the design guideline was to present specific numerical values to the inclusive playground design guidelines, to link with academic research and industrial products, to present pursuit values, and to expand the value of pursuing design methods. The contents were covered by scope, conceptualization, principles of design and design process, design guidelines, and checklists. Most of the guideline covers specific autonomous governments or countries that can apply the related systems or laws, but the composition of the detailed contents is different. The guiding value of inclusive playgrounds presented in each guideline is not a playground for the disabled but a playground for all, and some guidelines refer to the difficulty in playgrounds considering non-disabled children. Based on these concepts, design guidelines are presented in each guideline. Improving the accessibility in design principles is a common theme and adds to the principles of safety, independence, convenience, and playability. None of the guidelines do not provide design guidelines. Although there is a difference in the degree and method of specificity provided by each of the guidelines, the design guidelines can be generally summarized as space, copper line, and unit facilities. As mentioned in many guidelines, an inclusive playground is not only a playground for children with disabilities. Therefore, in the design guidelines, it is also important to the support play of children with disabilities and to induce inclusive play. The design guidelines presented in the guideline can be rearranged into three stages of 'supporting the play of children with disabilities', 'securing the dimensions and materials of spaces and facilities', 'adding auxiliary devices' and 'designing new facilities'. There are three design guidelines for inducing inclusive play. First, by creating various difficulty levels and intersecting spaces, children with various abilities can play with each other, and at the same time, they can interact witheach other. Second, all children can cooperate and play without distinction between children with disabilities and non-disabled children. Finally, the guardian provides the conditions for efficient support so that the disabled child can fully enjoy the inclusive playground.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.490-496
• /
• 2018

"Samkwang1," a japonica rice variety, was developed as a cross between "Samkwang" and F1 of Suwon152 (IT008283), which has a medium maturing and lodging resistance and Samkwang (IT284608), a high quality variety with bacterial blight resistance and mid-late maturing property by the rice breeding team at NICS in 2015. The heading date of "Samkwang1" was August 8 in the middle plain area, which was 2 days early than that of "Hwaseong." "Samkwang1" had a culm length of 77 cm, which was 7 cm shorter than that of "Hwaseong," and it had 128 spikelets per panicle. The viviparous germination rate of "Samkwang1" was 2.1%. "Samkwang1" showed resistance to blast, bacterial blight (K1, K2, and K3 race) and stripe virus, but was susceptible to the K3a race of bacterial blight, dwarf and black streak dwarf viruses, and plant hoppers. The milled rice of this variety exhibits translucent and medium short grains. The cooked rice grains of "Samkwang1" have an excellent palatability index (0.35) and lower protein content (6.2%) than that of "Hwaseong." The characteristics related to grain milling were better than those of "Hwaseong," especially the head rice milling recovery ratio and head rice ratio (94.2%). "Samkwang1" showed 5.62 MT/ha of milled rice productivity at 11 sites under ordinary cultivation conditions (Registration No. 6798).

• Journal of the Korean Society of Radiology
• /
• v.79 no.5
• /
• pp.254-258
• /
• 2018

Purpose: Establishment of an appropriate protocol for breast magnetic resonance imaging (MRI) in the study of image quality standards to enhance the effectiveness of medical image information exchange, which is part of the construction and activation of clinical information exchange for healthcare informatization. Materials and Methods: The recommended protocols of breast and MRI scans were reviewed and the questionnaire was prepared by a responsible researcher. Then, a panel of 9 breast dedicated radiologists was set up in Korea. The expert panel conducted a total of three Delphi agreements to draw up a consensus on the breast MRI protocol. Results: The agreed breast MRI recommendation protocol is a 1.5 Tesla or higher device that acquires images with prone position using a breast dedicated coil and includes T2-weighted and pre-contrast T1-weighted images. Contrast enhancement images are acquired at least two times, and include 60-120 seconds between images and after 4 minutes. The contrast enhancement T1-weighted image should be less than 3 mm in thickness, less than 120 seconds in temporal resolution, and less than $1.5mm^2$ in-plane pixel resolution. Conclusion: The Delphi agreement of the domestic breast imaging specialist group has established the recommendation protocol of the effective breast MRI.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1517-1527
• /
• 2020

This study is about the UV protection effect and water resistance of a multiple emulsion (W/O/W) sunblock cream applied with emotional engineering and reports an actual industrial case. Multiple emulsion system of sunblock cream has the characteristics of changing to a W/O type that is soft and moist when applied, and has excellent water resistance after absorption. Multiple emulsion cream is a highly functional sunblock cream that has both moisture and water resistance. It is a stable milky white cream with a viscosity of 36,000 cps. The organic sunscreen used for the sunscreen was ethylhexylmethoxycinnamate and bisethylhexyloxyphenolmethoxyphenyltriazine. Hexagonal zinc oxide and titanium dioxide that block both UVB and UVA were used. As a result of measuring the UV protection effect by the in-vitro method, the UV protection effect (SPF) is 78.9 for multiple emulsion cream, 76.7 for W/O cream, and 71.3 for O/W cream. It was found that the blocking effect was different. This obtained the highest effect value in the multiple emulsion. As a clinical (in-vivo) result of the UV protection effect, the SPF value representing the UV protection effect of the sunblock cream developed with a multiple emulsion system was 85.7, and the PA-value that blocks the UVA area was 26.5, and ++++. It was found that it has a corresponding high blocking effect. As a result of the water resistance test, the W/O/W formulation had a high waterproofing resistance of 93.8% even after 4 hours, W/O had 75.4%, and O/W had a low water resistance of 25.3%. In the results of the HUT test, it was found in the order of multiple emulsion sun block cream > hydrophilic cream > lipophilic cream. Based on the research results of this multiple emulsion, it is expected to be highly active as a sunblock cream dedicated to outdoor activities by improving the feeling of use, UV protection index, and water resistance. Therefore, in this study, a multiple emulsion system of sunblock cream is developed and has a characteristic that changes to a W/O type that has a soft and moist feeling when applied, and has excellent water resistance after absorption.

• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.463-472
• /
• 2021

Demand for examinations using transvaginal transducer with high frequencies is increasing to observe pelvic organs in gynecological ultrasound tests. However, the quality control of the replacement probe in clinical trials is not properly implemented and the evaluation criteria have not been established. Therefore, 58 transvaginal transducers and 20 convex transducers were applied to the ATS-539 ultrasound phantom for 20 ultrasound devices currently in clinical use to obtain their respective images and measure them quantitatively and qualitatively. For quantitative measurements, vertical measurement, horizontal measurement, and focal zone and qualitative measurements, dead zone, axial·lateral resolution, sensitivity, functional resolution, gray scale·dynamic range were performed. Quantitative statistical analysis showed significant differences between the two transducers in the lateral measurement and local area (p<0.05). qualitative comparative analysis showed differences in sensitivity and functional resolution. This occurs due to the difference in frequency between transducers and the transducer's injection geometry. Based on the above experiments, the tolerance for horizontal measurement is raised to 10% (±8 mm), the tolerance for sensitivity is observed up to 6 cm deep, which is 12 cm deep,which is the level of the third quartile (75%). The permissible range of functional resolution is up to 6 (12 cm), 6 (12 cm), 11 (11 cm), 9 (9 cm), 6 (6 cm) target, which is the level of the third quartile (75%). It is considered reasonable to adjust the depth of targets in gray scale·dynamic range to measure at a depth of 2 cm, which is 50% of the depth of 4 cm. As above, the criteria for evaluating the quality of transvaginal transducer for use in the past have been proposed and it is expected that this study will be used as a basic data for the production of phantom exclusively for transvaginal transducer in the future.

• Journal of the Society of Disaster Information
• /
• v.17 no.4
• /
• pp.722-732
• /
• 2021

Purpose: Due to the coronavirus infection-19 (COVID) pendemics, all educational institutions were required to provide full non-face-to-face real-time education, and fire officials were required to provide fire-fighting education by applying non-face-to-face education. In this difficult situation, the National Fire Service Academy tries to find the direction of the non-face-to-face real-time education and suggest ways to improve it through a survey of the status of non-face-to-face real-time education conducted by the NFSA to fire officials. Method: A survey was conducted on fire officials under the theme of "Consciousness Survey for Improving the Quality and Specialization of Non-face-to-face Real-Time Remote Education" and an in-depth analysis was conducted based on the results. Result & Conclusion: First, professors or educational operators shall actively utilize remote education programs suitable for educational characteristics by utilizing various programs. Second, a dedicated notebook for non-face-to-face training should be provided to provide an educational environment where all learners can participate in the training without difficulty. Third, in the case of education and training that requires the use of equipment due to the nature of fire officials' education and training, it is necessary to consider it as a non-face-to-face training place by arranging educational equipment at each fire station. Fourth, it is hard to expect a satisfactory educational effect to cope with practical education with theoretical education. Therefore, facilities and programs that enable non-face-to-face real-time hands-on training should be developed. It is worth considering the proper combination of face-to-face education while maintaining the social distance as much as possible until such non-face-to-face training is possible. Fifth, non-face-to-face education is considered to have high eye fatigue due to the light and electromagnetic waves of the computer screen, and as time goes by, the concentration level decreases. Therefore, it is necessary to form an education time to reduce the eye fatigue of learners and increase concentration through proper class and rest time. Finally, professors should operate a learner participation-oriented education that allows professors and learners to interact rather than one-sided knowledge transfer education. In addition, technical problems of non-face-to-face remote education should be thoroughly prepared through preliminary system checks to ensure that education is not disrupted.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.120-132
• /
• 2021

Although the development of high-Nickel is being actively carried out to solve the capacity limitation and the high price of raw cobalt due to the limitation of high voltage use of the existing LiCoO₂, the deterioration of the battery characteristics due to the decrease in structural stability and increase of the Ni content. It is an important cause of delaying commercialization. Therefore, in order to increase the high stability of the Ni-rich ternary cathod material LiNi_0.6Co_0.2Mn_0.2O₂, precursor Ni_0.6Co_0.2Mn_0.2-x(OH)₂/xTiO₂ was prepared using a nanosized TiO₂ suspension type source for uniform Ti substitution in the precursor. It was mixed with Li₂CO₃, and after heating, the cathode active material LiNi_0.6Co_0.2Mn_0.2-xTi_xO₂ was synthesized, and the physical properties according to the Ti content were compared. Through FE-SEM and EDS mapping analysis, it was confirmed that a positive electrode active material having a uniform particle size was prepared through Ti-substituted spherical precursor and Particle Size Analyzer and internal density and strength were increased, XRD structure analysis and ICP-MS quantitative analysis confirmed that the capacity was effectively maintained even when the Ti-substituted positive electrode active material was manufactured and charging and discharging were continued at high temperature and high voltage.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.281-304
• /
• 2022

Heungdeokjeon was the first pavilion built on the site of Sueocheong during the expansion of Gyeongungung. In this study, we tried to clarify the specific construction process of Heungdeokjeon, which was used for various purposes such as the copy location for Portraits of ancestors, temporary enshrinement site, and the funeral building for the rest of the body, which is Binjeon. In addition, we tried to confirm the historical value based on the characteristics derived by the history of the building and the rituals performed. Heungdeokjeon began to be built in the second half of 1899, and is estimated to have been completed between mid-February and mid-March 1900. It was a ritual facility equipped with waiting rooms for the emperor and royal ladies as an annex. The relocation work was planned in April 1901 and began in earnest after June, and it was closely linked to the construction of attached buildings of Seonwonjeon. In addition, comparing the records on the construction and relocation cost of Heungdeokjeon with those related to the reconstruction of Seonwonjeon, it was confirmed that annex buildings of Heungdeokjeon were relocated and used as annex buildings of Seonwonjeon. The characteristics identified in the process of Heungdeokjeon used as a place to copy portraits are as follows. First, it was used as a place to copy portraits twice in a short period of time. Second, it was the place where the first unprecedented works were carried out in relation to the copying of portraits. Third, the pavilion, which was specially built for imperial rituals, was used as a place to copy portraits. Since then, it has been used as a funeral building for the rest of the body, and features different from those of the previous period are identified. It was the building dedicated to rituals for use as Binjeon, and was also a multipurpose building for copying portraits. In other words, Heungdeokjeon, along with Gyeongbokgung Taewonjeon, is the building that shows the changes in the operation of Binjeon in the late Joseon Dynasty. Characteristics are also confirmed in portrait-related rituals performed at Heungdeokjeon. The first is that Jakheonlye was practiced frequently in a short period of time. The second is that the ancestral rites of Sokjeolje and Bunhyang in Sakmangil, which are mainly held in the provincial Jinjeon, were identified. This is a very rare case in Jinjeon of the palace. The last is that Jeonbae, jeonal, and Bongsim were implemented mutiple times. In conclusion, Heungdeokjeon can be said to be a very symbolic building that shows the intention of Gojong, who valued imperial rituals, and the characteristics of the reconstruction process of Gyeongungung.

• Economic and Environmental Geology
• /
• v.55 no.2
• /
• pp.209-217
• /
• 2022

The purpose of this study was to confirm the dissolution of arsenic from the stabilized soil around abandoned coal mines by cultivation activities. Experimental soils were collected from the agricultural field around Okdong and Buguk coal mines, and the concentration of arsenic in the soil and the geochemical mobility were confirmed. The average arsenic concentration was 20 mg/kg. The soil with relatively high geochemical mobility of arsenic in the soil was used in the batch and column experiment. The limestone was mixed with soil for soil stabilization, and the mixing ratio was 3% of limestone, based on the soil weight. The phosphoric acid fertilizer (NH₄H₂PO₄) was added to the soil to simulate a cultivation condition according to the Rural Development Administration's rules. Comparative soil without mixing limestone was prepared and used as a control group. The arsenic extraction from soil was increased following the fertilizer mixing amount and it shows a positive relationship. The concentration of phosphate in the supernatant was relatively low under the condition of mixing limestone, which is determined to be result of binding precipitation of phosphate ions and calcium ions dissolved in limestone. Columns were set to mix phosphoric acid fertilizers and limestone corresponding to cultivation and stabilization conditions, and then the column test was conducted. The variations of arsenic extraction from the soil indicated that the stabilization was effectible until 10 P.V.; however, the stabilization effect of limestone decreased with time. Moreover, the geochemical mobility of arsenic has transformed by increasing the mobile fractions in soil compared to initial soil. Therefore, based on the arsenic extraction results, the cultivation activities using phosphoric fertilizer could induce a decrease in the stabilization effect.