• Title/Summary/Keyword: 전온도

Search Result 2,641, Processing Time 0.034 seconds

Polymerization of Norbornene with ${\eta}^3$-Allyl Pd(II) Complexes/MAO Catalysts (${\eta}^3$-알릴 Pd(II) 화합물/MAO 촉매를 이용한 노보넨 중합)

  • 윤근병;이동호
    • Polymer(Korea)
    • /
    • v.28 no.3
    • /
    • pp.281-284
    • /
    • 2004
  • 비닐 형태의 부가중합에 의해 생성된 비결정 폴리노보넨은 주사슬이 고리화합물로 이루어져 있으며, 높은 고체밀도와 유리 전이 온도를 나타내며, 낮은 유전상수를 가지는 특징이 있다. 광학적으로 폴리노보넨은 낮은 투과손실을 가지고 있는데, 광통신 대역인 850 nm에서 삽입 손실이 0.1 dB/cm이고, 복굴절이 0.001을 나타내어 광결합 소자 및 광소자에 응용이 기대된다. 이는 주사슬의 고리화합물에 의해 결정화되지 않아, 유리 전이 온도가 28$0^{\circ}C$로 높으면서 비결정의 투명성을 가지기 때문이다.

A Study On Temperature Changes In Thigh According To Diagnostic Ultrasonography Scan Time (진단용 초음파 검사시간에 따른 허벅지의 온도 변화에 관한 고찰)

  • Kim, Ji-Won;Lim, Hyun-Soo
    • Journal of the Korean Society of Radiology
    • /
    • v.6 no.3
    • /
    • pp.201-206
    • /
    • 2012
  • Effect of prenatal ultrasound diagnosis have serious damage for the possibility has been reported very low. Long time ultrasound scan can rise the temperature in body tissues and affect the physical. Changes in body temperature have been studied with ultrasound scan time. Fetal ultrasonography were evaluated without the influence of time. The findings, ultrasound scan time in 40 minutes the temperature was reduced. 50 minute tissue temperature rose more than $1^{\circ}C$. If within 40 minutes of ultrasound to be safe guess

A study on optimization of front TCO for a-Si:H/c-Si heterojunction solar cells (a-Si:H/c-Si 이종접합 태양전지용 전면 투명전도막 최적화 연구)

  • Jeong, Daeyoung;Song, Junyong;Kim, Kyungmin;Park, Joo Hyung;Song, Jinsoo;Lee, Hi-Deok;Lee, JeongChul
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2011.05a
    • /
    • pp.129.1-129.1
    • /
    • 2011
  • a-Si:H/c-Si 구조의 이종접합 태양전지 전면 투명전도막으로 Indium tin oxide(ITO) 박막의 조건에 따라 태양전지 특성을 연구하였다. ITO 박막은 파우더 타겟으로 마그네트론 스퍼터링 방식으로 성막하였고, 증착 온도(Ts)에 따라 전기적, 광학적 특성을 비교, 분석하였다. 기판 증착 온도가 증가할수록 박막의 저항이 낮아지는 것으로 나타났으며 $350^{\circ}C$ 조건에서 가장 낮은 저항($34.2{\Omega}$/sq)을 보였다. 투과도 또한 기판 증착 온도가 올라갈수록 전반적인 향상을 나타냈다. a-Si:H/c-Si 기판의 MCLT(minority carrier lifetime)는 $350^{\circ}C$에서 최적($359{\mu}s$)의 결과를 나타냈다. 그 이상의 기판 온도에서는 오히려 감소하였는데, 이는 높은 온도에서의 a-Si:H/c-Si 계면의 열손상으로 판단된다.

  • PDF

Viscosity Properties of Corn, Potato and Sweet Potato Starch according to pH. (옥수수, 감자 및 고구마 전분의 pH에 따른 점도 특성)

  • 최옥자;신말식;조성효
    • Korean Journal of Human Ecology
    • /
    • v.3 no.1
    • /
    • pp.88-99
    • /
    • 2000
  • This study was perfomed to search for how properties of the starch viscosity appear in different qualities, when acetic acid is added. For this study, corn starch which belongs to A-type. Potato starch to B-type. and sweet potato starch to C-type were chosen as an experimental material. which was added to acetic acid controlled as pH 4.0, 4.5, and 5.0 at the time of before and after heating. After that, the viscosity properties of each starch was analyzed using Amylogram and Brookfield viscometer. As a result. the viscosity was shown high in an order of potato. sweet potato, and corn starch. According to addition of acetic acid. tile viscosity appeared to be low. The viscosity differences of before and after heating when the acid is added were shown as follows : Amylogram shows that the lower the pH is. the lower the viscosity is when the acid is added before-heating. In case the acid is added before-heating, gelatinization temperature, consistency and setback was increased. but breakdown decreased. In case the acid is added after-heating, the viscosity goes down at soon as it is added meanwhile consistency and setback was decreased. but breakdown increased. Such properties of the viscosity show a conspicuous variation in an order of potato. sweet Potato. and corn starch. Brookrield viscometer shows that the lower the apparent viscosity is. the lower pH is at the time of before-heating when the acid is added. In case of after-heating, when the acid is added. the apparent viscosity shows a higher inclination than that of before-heating in corn starch and sweet potato starch.

  • PDF

Effect of Cooling Timing in the Root Zone on Substrate Temperature and Physiological Response of Sweet Pepper in Summer Cultivation (여름 파프리카 수경재배에서 근권 냉방 시간이 근권 온도와 생리적 반응에 미치는 영향)

  • Choi, Ki Young;Ko, Ji Yeon;Yoo, Hyung Joo;Choi, Eun Young;Rhee, Han Cheol;Lee, Yong-Beom
    • Horticultural Science & Technology
    • /
    • v.32 no.1
    • /
    • pp.53-59
    • /
    • 2014
  • This study aimed to determine an appropriate cooling timing in the root zone for lowering substrate temperature and its effect on physiological response of sweet pepper (Capsicum annum L. 'Orange glory') grown on coir substrate in summer, from the July 16 to October 15, 2012. Daily temperature of substrate, root activity, leaf water potential, first flowering date, and the number of fruits were measured by circulating cool water through a XL pipe in the root zone during either all day (all-day) or only night time (5 p.m. to 3 a.m.; night) from the July 23 to September 23, 2012. For comparison, no cooling (control) was also applied. Between the $23^{rd}$ of July and $31^{st}$ of August (hot temperature period), daily average temperatures in substrates were $25.6^{\circ}C$, $26.1^{\circ}C$, and $29.1^{\circ}C$ for the all-day and night treatment, and control respectively. About 1.8 to $5^{\circ}C$ lower substrate temperature was observed in both treatments compared to that of control. In sunny day ($600-700 W{\cdot}m^{-2}{\cdot}s^{-1}$), the highest temperature of substrate was measured between 4 p.m. and 5 p.m. under both the all-day and night treatments, whereas it was measured between 7 p.m. and 8 p.m. under the control. Substrate temperatures during the day (6 a.m. to 8 p.m.) and night (8 p.m. to 6 a.m.) differed depending on the treatments. During the day and night, averaged substrate temperature was lower about $3.3^{\circ}C$ and $4.0^{\circ}C$ for the all-day, and $2.1^{\circ}C$ and $3.4^{\circ}C$ for the night treatment, compared to that of control. In the all-day and night treatment, the TD [TD = temperature of (control)] was greater in bottom than that of other regions of the substrate. Between the day and night, no different TD values were observed under the all-day treatment, whereas under the night treatment there was difference with the greatest degree in the bottom of the substrate. During the hot temperature period, total numbers of days when substrate temperature was over $25^{\circ}C$ were 40, 23 and 27 days for the control, all-day, and night treatment, respectively, and the effect of lowering substrate temperature was therefore 42.5% and 32.5% for the all-day and night treatment, respectively, compared to that for the control. Root activity and leaf water potential of plants grown under the all-day treatment were significantly higher than those under the night treatment. The first flowering date in the all-day treatment was similar to that in the night treatment, but 4-5 day faster than in the control. Also, the number of fruits in both treatments was significantly higher than that in the control. However, there was no effect of root zone cooling on eliminating delay in fruiting caused by excessively higher air temperature (> $30^{\circ}C$), although the substrate temperature was reduced $18^{\circ}C$ to $5^{\circ}C$. These results suggest that the method of cooling root zone temperature need to be incorporated into the lowering growing temperature for growth and fruit set of health paprika.

A Study on $Ni_{0.8}Cd_{0.2}Fe_2O_4$ by Mossbauer spectroscopy (Mossbauer 분광법을 이용한 $Ni_{0.8}Cd_{0.2}Fe_2O_4$)

  • Baek, Seung-Do
    • Korean Journal of Materials Research
    • /
    • v.6 no.11
    • /
    • pp.1107-1112
    • /
    • 1996
  • Ni를 Cd로 대치시켜 세라믹 소결법으로 합성한 Ni0.8Cd0.2Fe2O4 의 X-ray 회절선을 측정하여 구조를 확인하고, 형성된 결정체의 격자 상수를 조사하였다. 이 시료의 Mossbauer 스펙트럼을 80K-900K의 온도 영역에서 측정 분석하여 Mossbauer parameter의 온도 의존성과 Fe 이온에 대한 자료를 얻고, 이 자료를 토대로 Ni0.8Cd0.2Fe2O4 의 자기 전이 현상과 Curied 온도 Tc와 격자 비열 및 Debye 온도와 같은 물성을 조사하였다.

  • PDF

기체의 유량 및 온도 변화에 따른 진공 펌프의 성능 특성 연구

  • Heo, Jung-Sik;Im, Jong-Yeon;In, Sang-Ryeol
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.16-16
    • /
    • 2010
  • 반도체 및 LCD 공정이 진행되는 진공 챔버는 유량계, 진공 펌프 및 밸브 등을 이용하여 적절한 공정용 기체와 압력을 제어하게 된다. 공정에 따라 매우 높은 온도를 유지해야 하는 경우도 있다. 챔버 내부의 압력은 유입되는 기체의 시간에 따른 유량 변화에 의하여 주기적으로 변화하게 된다. 이러한 유량 변화는 장기적으로는 결국 펌프의 신뢰성(내구수명)에 영향을 주게 되며, 특히 고유량 및 저유량을 반복하게 되는 공정에 있어서는 더욱 큰 영향을 미치게 된다. 또한 챔버 내부는 다양한 화학적 반응이 일어나며 이러한 공정 기체들의 높은 온도는 결국 챔버에 연결된 펌프의 성능 및 신뢰성에도 영향을 주게 된다. 대부분의 반도체 및 LCD 공정이 이루어지는 압력에서는 전도 및 대류의 열전달 형태보다는 열복사에 의한 영향을 받게 되어 챔버를 적절히 설계한다면 펌프에 직접적으로 전달되는 복사량은 상대적으로 낮고, 펌프에 미치는 영향도 크지 않게 된다. 그러나 압력의 변화에 따라 전도 및 대류의 영향이 커지게 되는 경우에는 펌프 자체 및 성능에 큰 영향을 주게 될 것이다. 터보형 펌프의 국내(KS) 및 국제규격(ISO)의 성능시험방법에는 이러한 온도에 따른 펌프의 성능 특성 변화를 다루고 있지 않으며, 크라이오 펌프인 경우 열복사의 영향에 대한 시험방법이 일부 공개되어 있다[J. Vac. Sci. Technol. A 17(5)]. 본 연구에서는 기체의 유량 및 온도 변화에 따른 진공 펌프의 성능 특성 변화를 고찰하고자 하며, 향후 이러한 시험방법에 대한 표준 절차를 확립하고자 한다.

  • PDF

기체의 유량 및 온도 변화에 따른 진공 펌프의 성능 특성 연구

  • Heo, Jung-Sik;Im, Jong-Yeon;In, Sang-Ryeol
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.328-328
    • /
    • 2010
  • 반도체 및 LCD 공정이 진행되는 진공 챔버는 유량계, 진공 펌프 및 밸브 등을 이용하여 적절한 공정용 기체와 압력을 제어하게 된다. 공정에 따라 매우 높은 온도를 유지해야 하는 경우도 있다. 챔버 내부의 압력은 유입되는 기체의 시간에 따른 유량 변화에 의하여 주기적으로 변화하게 된다. 이러한 유량 변화는 장기적으로는 결국 펌프의 신뢰성(내구수명)에 영향을 주게 되며, 특히 고유량 및 저유량을 반복하게 되는 공정에 있어서는 더욱 큰 영향을 미치게 된다. 또한 챔버 내부는 다양한 화학적 반응이 일어나며 이러한 공정 기체들의 높은 온도는 결국 챔버에 연결된 펌프의 성능 및 신뢰성에도 영향을 주게 된다. 대부분의 반도체 및 LCD 공정이 이루어지는 압력에서는 전도 및 대류의 열전달 형태 보다는 열복사에 의한 영향을 받게 되어 챔버를 적절히 설계한다면 펌프에 직접적으로 전달되는 복사량은 상대적으로 낮고, 펌프에 미치는 영향도 크지 않게 된다. 그러나 압력의 변화에 따라 전도 및 대류의 영향이 커지게 되는 경우에는 펌프 자체 및 성능에 큰 영향을 주게 될 것이다. 터보형 펌프의 국내(KS) 및 국제규격(ISO)의 성능시험방법에는 이러한 온도에 따른 펌프의 성능 특성 변화를 다루고 있지 않으며, 크라이오 펌프인 경우 열복사의 영향에 대한 시험방법이 일부 공개되어 있다[J. Vac. Sci. Technol. A17(5)]. 본 연구에서는 기체의 유량 및 온도 변화에 따른 진공 펌프의 성능 특성 변화를 고찰하고자 하며, 향후 이러한 시험방법에 대한 표준 절차를 확립하고자 한다.

  • PDF

CIGS박막 태양전지소자의 온도변화에 따른 전기적 특성 분석

  • Kim, Sun-Gon;Kim, Sang-Seop;Choe, Byeong-Deok
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.08a
    • /
    • pp.224.2-224.2
    • /
    • 2013
  • 본 연구에서는 CIGS박막 태양전지의 온도 및 시간 인가에 따른 전기적 특성 변화를 분석하였다. 실험에서는 온도 스트레스를 $25^{\circ}C$, $50^{\circ}C$, $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$에서 각각 10시간씩 인가한 후에 Dark I-V와 C-V측정을 통해 전기적 특성 변화를 분석하였다. $25^{\circ}C$일 때를 초기 온도로 하여 특성을 측정한 것과 온도별로 노출시킨 후에 측정한 것을 비교했을 때 소자의 효율은 $100^{\circ}C$에서 감소하기 시작하였고, 인가한 온도가 높을수록 점점 많이 감소하는 모습이 나타났다. 이와 비슷하게 I-V그래프와 C-V그래프의 모습도 초기 값과 비교해서 변화하는 모습이 나타났고, 온도가 높아질수록 점점 변화하는 양이 증가하였다. I-V그래프에서 Diode ideality factor는 온도변화에 따라 초기 값 대비 증가하는 모습이 나타났다. 온도에 노출되기 전보다 노출된 후에 current와 capacitance가 감소하는 경향을 보이는데, 이는 온도의 영향으로 인해 소자의 결함이 증가하여 전하들의 반응에 영향을 주었기 때문으로 판단된다.

  • PDF

A Study on Design of the Temperature Testing Equipment Malfunction Monitoring System (온도시험 장비 오류 감시 시스템 설계에 관한 연구)

  • Yoon, Myung-Seob;Park, Koo-Rack
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2019.07a
    • /
    • pp.435-436
    • /
    • 2019
  • 본 논문에서는 첨단 정밀 전자장치의 신뢰성 시험을 위해 사용하는 온도시험 장비의 오동작이 발생이 되면, 시험담당자에게 문자메시지를 통해 현재 시험장비가 오동작 중임을 알릴 수 있는 시스템을 제안한다. 제안시스템은 기존에 오픈 소스를 이용한 시험장비의 오동작 여부를 모니터를 하는 시스템에 시험담당자에게 이 사실을 SMS로 전달하는 시스템을 추가한 것이다. 정밀 전자장치는 출고전에 온도시험 장비를 사용하여 설정한 저온, 고온 온도 상황에서 각각 정상적으로 장치가 동작하는지의 여부를 확인하게 된다. 만약 이 상황하에서 온도 시험장비가 설정한 저온의 온도 이하 혹은 설정한 고온의 온도 이상 등의 오동작이 발생되면, 수억원에 이르는 고가의 시험대상 제품이 손상을 입어 폐기하는 경우가 생긴다. 제안한 시스템은 시험 운용자가 자리를 비우는 야간에 특히 유용한 시스템으로서 온도시험장비와 별도의 전원을 사용하여 그 신뢰성을 높이는 장점을 가진다.

  • PDF