• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.795-799
• /
• 2012

기후변화의 영향으로 인해 전 지구적으로 강우의 시 공간적 패턴이 변화하고 있으며, 우리나라의 경우 강우일수는 줄어들고 강우량은 증가하는 양상을 보일 것으로 전망하고 있다. 이는 강우현상이 발생할 경우 그 강도가 과거와 비교하여 강해지며, 가뭄 역시 그 심도가 보다 심각해질 수 있음을 의미한다. 이와 같이 기후변화에 의한 강우의 양상이 과거와 이질적으로 변화하고 있으므로 이를 고려한 물관리분야의 적응대책의 수립이 필요하다. 이를 위해서는 기후변화 영향에 따른 각 지역별 취약성 평가가 선결되어야 하며, 그 결과에 근거한 적응대책의 수립이 필요하다. 따라서 본 연구에서는 환경부 국립환경과학원에서 개발한 CCGIS를 이용하여 전라남도 22개 시 군의 물관리분야에 대한 취약성 평가를 수행하였다. CCGIS는 다양한 기후변화 시나리오 중 A1B 시나리오를 바탕으로 하고 있다. 치수의 취약성, 이수의 취약성, 수질 및 수생태에 대한 취약성을 대용변수(기후노출, 민감도 및 적응능력)를 이용하여 현재와 미래시점에 대하여 평가하였다. 먼저, 현재시점에서 전라남도 22개 시 군의 치수에 대한 취약성 평가 결과를 보면, 보성군이 가장 취약한 것으로 나타났으며, 나주시가 가장 양호한 것으로 분석되었다. 또한, 현재시점의 이수에 대한 취약성 평가에서는 목포시의 취약성이 타지역에 비해 현저히 높은 것으로 나타났으며, 고흥군이 가장 양호한 것으로 분석되었다. 수질 및 수생태에 대한 취약성 평가에는 구례군이 가장 취약하며, 목포시가 가장 양호한 것으로 나타났다. 미래시점(2050년대)의 치수에 대하여 상대적으로 취약한 지역은 순천시, 광양시, 구례군으로 조사되었으며, 따라서 이에 대한 방안 마련이 필요한 것으로 판단된다. 이수에 대해 상대적으로 취약한 지역은 목포시로 나타났으며, 전라남도 전역에 걸쳐 이수에 대한 취약성이 미래로 갈수록 낮아지는 경향을 보이고 있다. 수질 및 수생태에 대한 취약성 평가의 결과는 시 공간적으로 큰 변동이 없는 것으로 평가되었다.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.827-835
• /
• 2019

In the pooling stage of a full reference image quality assessment (FR-IQA) technique, the global perceived quality for any distorted image is usually measured from the quality of its local image patches. But all the image patches do not have equal contribution when estimating the overall visual quality since the degree of degradation on those patches depends on various considerations i.e., types of the patches, types of the distortions, distortion sensitivities of the patches, saliency score of the patches, etc. As a result, weighted pooling strategy comes into account and different weighting mechanisms are used by the existing FR-IQA methods. This paper performs a thorough analysis and proposes a novel weighting function by considering the luminance adaptation as well as the visual saliency effect to offer more appropriate local weights, which can be adopted in the existing FR-IQA frameworks to improve their prediction accuracy. The extended experimental results show the effectiveness of the proposed weighting function.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.121-121
• /
• 2019

특정 지역에 집중적으로 비가 내리는 현상인 국지성호우가 빈번히 발생함에 따라 하천 주변 사회기반시설의 침수 위험성이 증가하고 있다. 침수 위험성 판단 여부는 주로 수위정보를 이용하며 수위 예측은 대부분 수치모형을 이용한다. 본 연구에서는 빅데이터 기반의 RNN(Recurrent Neural Networks)기법 알고리즘을 활용하여 수위를 예측하였다. 연구대상지는 조위의 영향을 많이 받는 한강 전역을 대상으로 하였다. 2008년~2018년(10개년)의 실제 침수 피해 실적을 조사한 결과 잠수교, 한강대교, 청담대교 등에서 침수 피해 발생률이 높게 나타났고 SNS(Social Network Services)와 같은 비정형화 자료에서는 청담대교가 가장 많이 태그(Tag)되어 청담대교를 연구범위로 설정하였다. 본 연구에서는 Python에서 제공하는 Tensor flow Library를 이용하여 수위예측 알고리즘을 적용하였다. 데이터는 정형화 데이터와 비정형 데이터를 사용하였으며 정형화 데이터는 한강홍수 통제소나 기상청에서 제공하는 최근 10년간의 (2008~2018) 수위 및 강우량 자료를 수집하였다. 비정형화 데이터는 SNS를 이용하여 민간 정보를 수집하여 정형화된 자료와 함께 전체자료를 구축하였다. 민감도 분석을 통하여 모델의 은닉층(5), 학습률(0.02) 및 반복횟수(100)의 최적값을 설정하였고, 24시간 동안의 데이터를 이용하여 3시간 후의 수위를 예측하였다. 2008년~ 2017년 까지의 데이터는 학습 데이터로 사용하였으며 2018년의 수위를 예측 및 평가하였다. 2018년의 관측수위 자료와 비교한 결과 90% 이상의 데이터가 10% 이내의 오차를 나타내었으며, 첨두수위도 비교적 정확하게 예측되는 것을 확인하였다. 향후 수위와 강우량뿐만 아니라 다양한 인자들도 고려한다면 보다 신속하고 정확한 예측 정보를 얻을 수 있을 것으로 기대된다.

• Computational Structural Engineering
• /
• v.9 no.1
• /
• pp.141-149
• /
• 1996

Efficient approximate reanalysis techniques based on substructuring are presented. In most optimal design problems, the analysis precedure must be repeated many times. In particular, one of the main obstacles in the structural optimization systems is high computational cost and time required for the repeated analysis of large-scale structural systems. The purpose of this paper is to show how to evaluate efficiently the sturctural behavior of new designs using information from the previous ones, instead of the multiple repeated analysis of basic equations for successive modification in the optimal design. The proposed reanalysis method is a combined Taylor series expansion and reduced basis method based on substructuring. Several numerical examples illustrate the effectiveness of the method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.4
• /
• pp.22-29
• /
• 2003

In the virtual home environment (VHE), which was proposed to offer global roaming and personal service environment portability, user's profiles and service logics are conveyed from home network to visited network to provide services at the visited network. Because user's profiles and service logics may contain confidential information, some procedures for mutual authentication among entities for offering confidence are needed. For these issues, we propose and analyze three 3-Party mutual authentication Protocols adaptable to the VHE in 3G ; password based mutual authentication protocol, mutual authentication protocol with CHAP and key exchange and mutual authentication protocol with trusted third party.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.1
• /
• pp.35-46
• /
• 2004

In Korea, around one - third of the country is occupied by granite, and granite weathered soils are widely distributed. Most of the research on this soil has been performed using reconstituted specimens because of the extreme difficulty of undisturbed sampling due to the sensitive particle structures. Therefore, the comparisons of deformational characteristics, which is expressed in terms of shear and Young's moduli and damping ratio, obtained from the undisturbed and reconstituted specimens are important for the reliable understanding of soil behavior. In this study, the resonant column and torsional shear tests were performed on granite weathered soils in Korea, and the deformation characteristics of undisturbed and reconstituted soil on granite weathered soils were evaluated and compared.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.8-16
• /
• 2004

An inversion method is presented for the determination of the compressional wave speed, compressional wave attenuation, thickness of the sediment layer and density as a function of depth for a horizontally stratified ocean bottom. An experiment for estimating those properties was conducted in the shallow water of South Sea in Korea. In the experiment, a light bulb implosion and the propagating sound were measured using a VLA (vertical line array). As a method for estimating the geoacoustic properties, a coherent broadband matched field processing combined with Genetic Algorithm was employed. When a time-dependent signal is very short, the Fourier transform results are not accurate, since the frequency components are not locatable in time and the windowed Fourier transform is limited by the length of the window. However, it is possible to do this using the wavelet transform a transform that yields a time-frequency representation of a signal. In this study, this transform is used to identify and extract the acoustic components from multipath time series. The inversion is formulated as an optimization problem which maximizes the cost function defined as a normalized correlation between the measured and modeled signals in the wavelet transform coefficient vector. The experiments and procedures for deploying the light bulbs and the coherent broadband inversion method are described, and the estimated geoacoustic profile in the vicinity of the VLA site is presented.

• Journal of Digital Contents Society
• /
• v.1 no.1
• /
• pp.53-64
• /
• 2000

This paper is related to color image segmentation scheme which makes it possible to achieve the excellent segmented results by block-based segmentation using Y/C bit-plane summation image. First, normalized chrominance summation image is obtained by normalizing the image which is summed up the absolutes of color-differential values between R, G, B images. Secondly, upper 2 bits of the luminance image and upper 6bits of and the normalized chrominance summation image are bitwise operated by the pixel to generate the Y/C bit-plane summation image. Next, the Y/C bit-plane summation image divided into predetermined block size, is classified into monotone blocks, texture blocks and edge blocks, and then each classified block is merged to the regions including one more blocks in the individual block type, and each region is selectively allocated to unique marker according to predetermined marker allocation rules. Finally, fine segmented results are obtained by applying the watershed algorithm to each pixel in the unmarked blocks. As shown in computer simulation, the main advantage of the proposed method is that it suppresses the over-segmentation in the texture regions and reduces computational load. Furthermore, it is able to apply global parameters to various images with different pixel distribution properties because they are nonsensitive for pixel distribution. Especially, the proposed method offers reasonable segmentation results in edge areas with lower contrast owing to the regional characteristics of the color components reflected in the Y/C bit-plane summation image.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.1 s.53
• /
• pp.11-19
• /
• 2007

This paper proposes an optimal design method of distribution and capacities of linear viscous dampers for vibration control of two adjacent buildings. The previous researches have dealt with suboptimal design problem under the assumption that linear viscous dampers are distributed uniformly or proportionally to the sensitivity of the modal damping ratio according to floors, whereas this study deals with global optimization problem in which the damping capacities of each floor are independently selected as design parameters. For this purpose, genetic algorithm to effectively search multiple design variables in large searching domains is adopted and objective function leading to the global optimal solutions is established through the comparison of several optimal design values obtained from different objective functions with control performance and damping capacity. The effectiveness of the proposed method is investigated by comparing the control performance and total damping capacity designed by the proposed method with those of the previous method. In addition, the time history analyses are performed by using three historical earthquakes with different frequency contents, and the simulation results demonstrate that the proposed method is an effective seismic design method for the vibration control of the adjacent structures.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2014

Using the level set and the meshfree methods, we develop a topological shape optimization method applied to linear elasticity problems. Design gradients are computed using an efficient adjoint design sensitivity analysis(DSA) method. The boundaries are represented by an implicit moving boundary(IMB) embedded in the level set function obtainable from the "Hamilton-Jacobi type" equation with the "Up-wind scheme". Then, using the implicit function, explicit boundaries are generated to obtain the response and sensitivity of the structures. Global nodal shape function derived on a basis of the reproducing kernel(RK) method is employed to discretize the displacement field in the governing continuum equation. Thus, the material points can be located everywhere in the continuum domain, which enables to generate the explicit boundaries and leads to a precise design result. The developed method defines a Lagrangian functional for the constrained optimization. It minimizes the compliance, satisfying the constraint of allowable volume through the variations of boundary. During the optimization, the velocity to integrate the Hamilton-Jacobi equation is obtained from the optimality condition for the Lagrangian functional. Compared with the conventional shape optimization method, the developed one can easily represent the topological shape variations.