• Title/Summary/Keyword: 전압조정기

Search Result 191, Processing Time 0.024 seconds

Analysis and Implementation of Single-Stage AC/DC Converter with Magnetic Energy Feedback Technique for Power Factor Correction (역률개선을 위한 자기에너지 궤환기법의 단일전력단 AC/DC 컨버터의 해석 및 구현)

  • 문건우;오관일;전영수
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.3 no.2
    • /
    • pp.148-155
    • /
    • 1998
  • A novel single-switch, single-stage, AC/DC forward converter with transformer magnetic energy feedback technique for power factor correction is proposed. The operational principle and analysis of the proposed converter is presented. The proposed converter gives the good power factor correction, low line current harmonic distortions, and tight output voltage regulation. The prototype shows the IEC 555-2 requirements are met satisfactorily with nearly unity power factor.

Each Nozzle Control for Optimum Formation of Ink Drop of Piezoelectric Printing Head (압전 프린트헤드의 잉크드롭 최적형성을 위한 각 노즐제어)

  • Choi, Geun-Soo;Youn, Shin-Yong;Baek, Soo-Hyun;Kim, Yong
    • Proceedings of the KIEE Conference
    • /
    • 2006.10d
    • /
    • pp.215-217
    • /
    • 2006
  • 본 논문에서는 잉크젯 프린팅 기술을 이용한 산업용 FPCB의 패턴형성을 위한 잉크드롭의 최적형성을 연구목적으로 하였다. 이를 위하여 압전헤드에 대한 구동특성을 해석하였으며 드롭형성을 위한 전압파형의 크기, 펄스폭, 기울기(감속)조정을 통하여 잉크드롭을 최적으로 형성하도록 제어기(FPGA)를 구성하였으며 실험결과를 통하여 잉크의 최적형성 과정을 확인할 수 있었으며 잉크 드롭시 1[mm]에 ${\pm}10$[um]의 드롭오차를 ${\pm}2$[um]까지 감소시켜 50[um]패턴을 프린트하였다.

  • PDF

Design and fabrication of the 2.4 to 2.5 GHz voltage controlled oscillator using microstrip patch antenna (마이크로스트립 패치 안테나를 이용한 2.4 ~ 2.5GHz 에서 동작하는 전압 조정 발진기의 설계 및 제작)

  • 황재호;명노훈
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.33A no.2
    • /
    • pp.78-86
    • /
    • 1996
  • Solid-state devices can be directly integrated with a planar antenna to form active antenna elements. In this paper, the voltage controlled oscillator (VCO) is designed and fabricated at 2.4 to 2.5 GHz using a microstrip patch antenna. A varactor diode is used as avariable reactance. The predicted frequency tuning range of the VCO is 2.448 to 2.498 GHz in the design procedure and the fabricated VCO has 2.446 to 2.498 GHz frequency tuning range when the varactor tuning voltage is varied from 0 to 11V. Transmitted power output of the patch antenna which serves both as a rsonator and a radiating element for VCO is about 18 mW over this tuning range.

  • PDF

A Study on the step response characteristics in shielded resistor divider for full lightning impulse voltage (전파 뇌충격전압 측정용 쉴드저항분압기의 직각파 특성에 관한 연구)

  • 김익수;이형호;조정수;박정후
    • The Transactions of the Korean Institute of Electrical Engineers
    • /
    • v.45 no.2
    • /
    • pp.283-288
    • /
    • 1996
  • This paper presents the development technology of standard shielded resistor divider for full lightning impulse voltage. The ability of large-capacity power apparatus to withstand lighting stroke is usually evaluated by means of full lightning impulse voltage. Lightning impulse voltage test has been essential to evaluate the insulation performance of electrical power apparatus. Recently international standard (IEC 60) on high voltage measurement techniques is being revised and requests a formal traceability of high voltage measurements. Therefore, general interest for this area has grown considerably during last years, and several international intercomparisons have already completed worldwide, i.e. Europe, Japan, America etc., In this viewpoint, we have also investigated the step response of the standard shielded resistor divider, which satisfies the IEC recommendation.

  • PDF

전자펌프의 원리 및 기술개발 현황

  • 김동화
    • 전기의세계
    • /
    • v.39 no.9
    • /
    • pp.35-38
    • /
    • 1990
  • 전자펌프(Electromagnetic)는 액체금속의 도전성을 이용하는 것으로 종래의 기계식에 비해 회전부가 없고 기밀을 요하는 패킹장치 등이 없어 보수가 필요없을 뿐 아니라 동작시 유도전압 조정기를 이용하여 유량제어를 쉽게 할 수 있는 등 많은 장점이 있다. 따라서 신뢰성과 안전성이 요구되는 고속증식로, 인공위성과 같이 액체금속을 냉각재로 사용한는 시스템의 펌프에는 물론 알루미늄, 납, 수은 등과 같이 산업계에서 많이 쓰이는 용융금속의 수송에도 대단히 중요한 장치이다. 그러나 전자펌프는 구조상 2차측(액체금속)과 펌프닥트등에서의 손실이 대단히 클 뿐 아니라 전자펌프의 이용 특성상 높은 온도에서 사용해야 하므로 절연 및 내열재료 특성에도 아직 연구되어야 할 과제가 많다. 본 난에서는 이러한 관점에 입각하여 전자펌프의 기본원리를 기술하고 국내외의 연구현황 및 전망을 고찰하여 보고자 한다.

  • PDF

AVR controller design of synchronous generator (동기발전기의 자동전압조정장치 제어기 설계)

  • Lee, J.M.;Kim, M.H.;Lee, J.H.;Park, Y.H.;Lim, I.H.;Goo, K.M.
    • Proceedings of the KIEE Conference
    • /
    • 1993.07a
    • /
    • pp.167-170
    • /
    • 1993
  • This paper deals with AVR(Automatic Voltage Regulator) control1or design of synchronous generator adapting AC indirect excitation system. The simulation results are presented in frequency and tine domain for two plants(A and B). Try and error method for compensator design is used.

  • PDF

The Development of Automatic Voltage Regulation Using DSP for the Small and Middle Generator (DSP를 사용한 중소형 발전기 자동전압 조정기 개발)

  • 임익헌;류호선;이주현;이재도;송성일
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2003.11a
    • /
    • pp.305-309
    • /
    • 2003
  • In recent large power plants, the excitation system has the static type, which is characterized by the fast response to increase the transient stability. The high capacity excitation systems developed in KEPRI is either a hot back-up, hybrid hot back-up (analog + digital) or triple modular redundant digital type, both well proven by actual tests and applied in commercial operation. The large excitation systems have been developed taking into consideration the parameters of large scale power plants, resulting in high costs and subsequently are supplied at higher prices. When used at small sized power plants, the cost impact is relatively high. As a countermeasure to such a situation, KEPRI has recently developed a reliable, miniature digital excitation system, which is one-board type, convenient and adequate for low-price, small-sized (0.5MW∼200MW) power plants.

  • PDF

테슬라 코일의 설계와 제작

  • Yang, So-Hui;An, Seong-Jung;Park, So-Jeong;Mun, Jin-Pyeong;Jo, Jeong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.08a
    • /
    • pp.168.2-168.2
    • /
    • 2013
  • 테슬라 코일은 니콜라 테슬라가 고안한 변압기로, 교류 아크 방전을 통한 플라즈마의 발생을 관찰할 수 있는 기기이다. 고전압 트랜스를 사용해 저전압을 고전압으로 변환하고, 변환된 에너지를 콘덴서에 충전시켜 스파크 갭 사이에 절연파괴를 일으켜 아크 방전을 통한 플라즈마를 발생시킨다. 이 때 콘덴서와 1차코일 사이에 폐회로가 형성되고, 1차 코일과 2차 코일 사이에 전자기장이 생긴다. 공진주파수가 맞을 때 만들어진 전자기장으로 에너지가 전달되고, 2차 코일에서 증폭된 에너지는 충전된 탑로드 끝에서 아크 방전을 통하여 플라즈마의 형태로 방출된다. 본 프레젠테이션에서는 한동글로벌 학교 고등학생들이 50시간에 걸쳐 직접 제작한 테슬라 코일의 자세한 스펙, 만든 부품들과 그를 만드는 데 사용한 물품들, 설계도들, 날짜별로 기록한 테슬라 코일의 자세한 제작 과정과 후기, 만든 테슬라 코일의 작동과 이를 이용한 추가적인 실험 내용을 발표하고자 한다.

  • PDF

All Digital DLL with Three Phase Tuning Stages (3단 구성의 디지털 DLL 회로)

  • Park, Chul-Woo;Kang, Jin-Ku
    • Journal of IKEEE
    • /
    • v.6 no.1 s.10
    • /
    • pp.21-29
    • /
    • 2002
  • This paper describes a high resolution DLL(Delay Locked Loop) using all digital circuits. The proposed architecture is based on the three stage of coarse, fine and ultra fine phase tuning block which has a phase detector, selection block and delay line respectively. The first stage, the ultra fine phase tuning block, is tune to accomplish high resolution using a vernier delay line. The second and third stage, the coarse and fine tuning block, are tuning the phase margin of Unit Delay using the delay line and are similar to each other. It was simulated in 0.35um CMOS technology under 3.3V supply using HSPICE simulator. The simulation result shows the phase resolution can be down to lops with the operating range of 250MHz to 800MHz.

  • PDF

A Design of Ultra-sonic Range Meter Front-end IC (초음파 거리 측정회로용 프론트-엔드 IC의 설계)

  • Lee, Jun-Sung
    • 전자공학회논문지 IE
    • /
    • v.47 no.4
    • /
    • pp.1-9
    • /
    • 2010
  • This paper describes a ultrasonic signal processing front-end IC for distance range meter and body detector. The burst shaped ultrasonic signal is generated by a self oscillator and its frequency range is about 40[kHz]-300[kHz]. The generated ultrasonic signal transmit through piezo resonator. The another piezo device transduce from received ultrasonic signal to electrical signals. This front-end IC contained low noise amplifier, band pass filter, busrt detector and time pulse generator and so on. This IC has two type of new idea for improve function and performance, which are self frequency control (SFC) and Variable Gain Control amplifier (VGC) scheme. The dimensions and number of external parts are minimized in order to get a smaller hardware size. This device has been fabricated in a O.6[um] double poly, double metal 40[V] High Voltage CMOS process.