• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.84-89
• /
• 2010

In this paper, a novel voltage-controlled oscillator (VCO) using the microstrip square open loop dual split ring resonator is presented for reducing the phase noise. The square-shaped dual split ring resonator having the form of the microstrip square open loop is investigated to reduce the phase noise. Compared with the microstrip square open loop resonator and the microstrip square open loop split ring resonator as well as the conventional microstrip line resonator, the microstrip square dual split ring resonator has the larger coupling coefficient value, which makes a higher Q value, and has reduced the phase noise of VCO. The VCO with 1.7V power supply has the phase noise of -123.2~-122.0 dBc/Hz @ 100 kHz in the tuning range, 11.74~11.75 GHz. The figure of merit (FOM) of this VCO is-214.8~-221.7 dBc/Hz dBc/Hz @ 100 kHz in the same tuning range. Compared with VCO using the conventional microstrip line resonator, VCO using microstrip square open loop resonator, the phase noise of VCO using the proposed resonator has been improved in 26 dB, 10 dB, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.9
• /
• pp.1277-1283
• /
• 2013

In this paper, a novel voltage controlled oscillator(VCO) using CSRR loaded microstrip line for X-band RADAR is proposed. Using the microstrip line loaded CSRR inserted between the oscillator and buffer to the filter, the harmonic suppression has been improved. The measured results of the fabricated oscillator shows that its oscillation frequencies are from 9.28 to 9.39GHz according to the tuning voltage 0~10V, its output power level are about 16.6dBm at 9.35GHz. Compared with VCO using the conventional VCO, VCO using CSRR loaded microstirp, the harmonic suppression characteristic has been improved in 10.4dB

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.369-372
• /
• 2000

본 논문에서는 P-HEMT Gate-바이어스 튜닝에 의한 위상동기 마이크로파 발진기를 설계하였다. 설계된 유전체 발진기는 병렬궤환공진 형태로서 P-HEMT의 게이트단에서 전압을 제어하여 전압제어발진기 형태로 주파수를 가변시키므로서 안정된 위상동기신호를 나타나도록 하였다. 위상동기방식은 외부에서 제공되는 125㎒의 기준주파수를 SRD로 체배시켜 하모닉 신호를 이용한 마이크로파 샘플링 위상검파 방식으로 설계하였으며, 유전체 발진기의 자유발진신호와 샘플링 신호사이의 위상비교에 의하여 ±1㎒ 범위의 고안정 특성을 갖는 13.25㎓대역의 위상고정 발진기의 동기화와 저 위상잡음을 나타내었다.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.334-337
• /
• 2003

GSM / DCS1800 / PCS 대역에서 사용 가능한 9.5mm x 6.5mm 크기의 트리플 밴드 초소형 전압제어 발진기를 설계하였다. 설계된 트리플 밴드 VCO는 GSM(880∼915MHz) 대역에서 7±3dBm의 출력전력, DCS1800 (1720∼1785MHz) 대역에서 8±3dBm의 출력전력, PCS(1720∼1780MHz) 대역에서 0±3dBm의 출력전력의 특성을 보인다. 위상 잡음의 특성은 -110dBc @100KHz 이하의 만족할만한 성능을 보인다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.69-75
• /
• 2010

In this paper, with using the clapp type VCO(Voltage Controlled Osillator) configuration a wideband frequency synthesizer in UHF band is proposed. In order to design a wideband frequency synthesizer, the variation of phase in the negative resistance circuit as well as the load circuit was analyzed. Based on this result we propose a method to widen the operation range of the VCO. A frequency synthesizer using the proposed wideband VCO was designed and fabricated. It is shown that the synthesizer has the operating frequency range of 740~1,530 MHz by 0~5 V varactor tuning voltage, and it had the output power of 2~-6 dBm. Moreover, the phase noise measured as -77 dBc/Hz at 10 kHz offset, and as -108 dBc/Hz at 100 kHz offset from the oscillation frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.398-402
• /
• 2003

In this paper, a VCDRO(Voltage Control Dielectric Resonator Oscillator) applied to FMCW(Frequency Modulated Continuous Wave)Radar as stable source is implemented and constructed with a MESFET for low noise, a dielectric resonator of high frequency selectivity, and high Q varator diode to obtain a good phase noise performance and stable sweep characteristics. The designed circuits is simulated thrash harmonic balance simulation technique to provide the optimum performance. The measured result of a fabricated VCDRO shows that output is 2.22dBm at 12.05GHz, harmonic suppression -30dBc, phase noise -130dBc at 100kHz offset, and sweep range of varator diode $\pm$18.7MHz, respectively. This oscillator will be available to FMCW Radar.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1184-1189
• /
• 2004

A new schematic of quadrature voltage controlled oscillator(QVCO) is designed and fabricated. To obtain quadrature characteristic and low phase noise simultaneously, two differential VCOs are forced to un in quadrature mode by using coupling amplifier with a source degeneration resistor, which is optimized to obtain quadrature accuracy with minimum phase noise degradation. The designed QVCO was fabricated in standard CMOS technology. The measured performance showed the phase noise of below -120 dBc/Hz at 1 MHEz frequency offset, tuning bandwidth of 210 MHz from 2.34 GHz to 2.55 GHz with a tuning voltage varying form 0 to 1.8 V Quadrature error of 0.5 degree and amplitude error of 0.2 dB was measured with conjunction with low-lF mixer. The fabricated QVCO requires 19 mA including 5 mA in the VCO core part fiom a 1.8 V supply.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.539-545
• /
• 2016

In this paper, a novel coupled C type resonator is proposed for improvement of phase noise characteristics that is weak point of oscillator using planar type microstrip line resonator. Oscillator using proposed shorted coupled C type resonator is designed, it has improved phase noise characteristics. At the fundamental frequency of 9.8GHz, 4.87dBm output power and -84.7 dBc@100kHz phase noise have been measured for oscillator with shorted coupled C type resonator. Next, we designed voltage controlled oscillator using proposed shorted coupled C type resonator with varactor diode. The VCO has 33.8MHz tuning range from 9.7807GHz to 9.8145GHz, and phase noise characteristic is -115~-112.5dBc/Hz@100KHz. Due to its simple fabrication process and planar type, it is expected that the technique in this paper can be widely used for low phase noise oscillators for both MIC and MMIC applications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.79-84
• /
• 2007

In this paper, a fully-integrated low phase noise multi-band CMOS VCO using automatic level controller (ALC) and switched LC tank has been presented. The proposed VCO has been fabricated in a 0.13-um CMOS process. The switched LC tank has been designed with a pair of capacitors and two pairs of inductors switched using MOS switch. By using this structure, four band (2.986 ${\sim}$ 3.161, 3.488 ${\sim}$ 3.763, 4.736 ${\sim}$ 5.093, and 5.35 ${\sim}$ 5.887 GHz) operation is achieved in a single VCO. The VCO with 1.2 V power supply has phase noise of -118.105 dBc/Hz @ 1 MHz at 2.986 GHz and -113.777 dBc/Hz @ 1 MHz at 5.887 GHz, respectively. The reduced phase noise has been approximately -1 ${\sim}$ -3 dBc/Hz @ 1 MHz in the broadest tuning range, 2.986 ${\sim}$ 5.887 GHz. The VCO has consumed 4.2 ${\sim}$ 5.4 mW in the entire frequency band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.853-861
• /
• 2009

In this paper, we propose the architecture of a multi-band receiver which can receive X-band, Ku-band, K-band and Ka-band signals. For implementing this architecture, we designed a wideband and high power VCO with a buffer stage. In order that a buffer does not affect the characteristic of a oscillation in steady state condition, output impedance of a oscillation part and input impedance of a buffer are orthogonally crossed. The fabricated VCO meets the performance parameter of the multi-band receiver which has a $14.00{\sim}15.20\;GHz$ bandwidth with respect to the tuning voltage, $0.0{\sim}8.0\;V$, and output power of $12{\sim}13\;dBm$.