• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.923-930
• /
• 2001

In this paper, in order to improve the performance of TCP short traffic services in wireless Internet environments, the Split-ACKs(SPACK) scheme is proposed. In wireless networks, unlike wired networks, packet losses will occur more often due to high bit error rates. Therefore, each packet loss over wireless links results in congestion control procedure of TCP being invoked at the source. This causes severe end-to-end performance degradation of TCP. In this paper, to alleviate the TCP performance, the SPACK method, split acknowledgement packets in the base station, is proposed. Using computer simulation, the performance of TCP using SPACK is analyzed and shows better performance than traditional TCP protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.150-156
• /
• 2007

Noise is generated by several causes, when signal is processed. Hence, it generates error in the process of data transmission and decreases recognition ratio of image and speech data. Therefore, after eliminating those noises, a variety of methods for reconstructing the signal have been researched. Recently, wavelet transform which has time-frequency localization and is possible for multiresolution analysis is applied to many fields of technology. Then threshold-and correlation-based methods are proposed for removing noise. But, conventional methods accept a lot of noise as an edge and are impossible to remove the additive white Gaussian noise (AWGN) and the impulse noise at the same time. Therefore, in this paper we proposed new wavelet-based algorithm for reconstructing degraded signal by noise and compared it with conventional methods.

• Journal of KIISE:Information Networking
• /
• v.34 no.4
• /
• pp.269-275
• /
• 2007

Since being constructed without any infrastructure-based network, ad hoc network has been received much attention as a key technology for ubiquitous networks. Due to high bit error rate and dynamically changing network topology in ad hoc network, the routing protocol that provides stable multi-hop communication path is the one of the key issues to address. The previously proposed ad hoc routing protocols have their limitations on network overhead, stability, and scalability. In this paper, we consider hybrid wireless network, which can overcome shortcomings of ad hoc network, and propose a novel routing protocol called zone master-based routing protocol. We verify with computer simulations that the proposed routing protocol outperforms other existing routing protocols in the various wireless environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.142-145
• /
• 2015

Presentation is the form of communication to draw out audience's behaviors in a limited time. The importance of presentation is emphasized over time. So speaker uses various remote toola. Therefor, in this paper, the remote control system for presentation using mobile network was proposed. The existing remote control applications has error on network connection, and are difficult to use without description for use. This system was designed and implemented to compensate the defect of the existing system. The system we have will connect PC and smartphones through socket to communication with TCP, which is connection-oriented transport service. It is made for users to select the files from the list of sent files and operate the process of presentation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.63-70
• /
• 2004

This paper describes the link layer and physical layer of the Serial ATA which is the next generation for parallel ATA specification that defines data transfer between PC and peripheral storage devices. The link layer consists of CRC generation/error detection, 8b/10b decoding/encoding, primitive generation/detection block. For the physical layer, it includes CDR(Cock Data Recovery), transmission PLL, serializer/de-serializer. It also includes generation and receipt of OOB(Out-Of-Band) signal, impedance calibration, squelch circuit and comma detection/generation. Additionally, this chip includes TCB(Test Control Block) and BIST(Built-In Selt Test) block to ease debugging and verification. It is fabricated with 0.18${\mu}{\textrm}{m}$ standard CMOS cell library. All the function of the link layer operate properly. For the physical layer, all the blocks operate properly but the data transfer is limited to the 1.28Gbps. This is doe to the affection or parasitic elements and is verified with SPICE simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7A
• /
• pp.1152-1161
• /
• 2001

본 논문에서는 이동국 수신 신호의 SINR을 최대화하는 빔 성형 알고리듬을 이용하여, 폐쇄 루프 송신 빔 성형기술을 적용한 순방향 링크 CDMA 시스템에서의 안테나 수, 귀환 채널의 구조, 귀환 지연 등과 시스템 성능과의 상관관계를 연구하였다. 폐쇄 루프 전송 빔 성형에서는 이동국이 각 안테나가 겪는 채널을 추정하여 수신 SINR을 최대화시키는 가중치 벡터를 계산하고, 귀환채널을 통해 가중치 벡터의 양자화된 진폭과 위상정보를 전송한다. 컴퓨터 모의 실험 결과는 송신 안테나가 2개, 3개, 4개로 늘어남에 따라 빔 성형 이득은 단일 송신 안테나와 비교해 $10^{-5}$ BER 근방에서 4.2dB, 5.8dB, 7dB로 증가하지만 양자화 오류에 의한 성능 저하 또한 0.1dB, 0.6dB, 1.3dB로 커지는 것을 보여준다. 또한 순방향 채널의 최대 도플러 주파수가 100Hz일 때에는 귀환 채널을 통한 소신 가중치 벡터를 보다 빠르게 갱신하는 것이 가중치 벡터의 양자화 레벨의 수를 늘여주는 것보다 $10^{-5}$ BER 근방에서 0.6dB 더 좋은 성능을 보이며, 최대 도플러 주파수가 10Hz일 때에는 가중치 벡터의 갱신 속도를 늘이기 보다 양자화 레벨의 수를 늘여주어 정확한 가중치 벡터를 전송하는 편이 0.9dB의 성능 향상을 보인다. 두 전력제어 그룹 길이의 귀환지연으로 인한 성능저하는 채널의 최대 도플러 주파수가 50Hz인 경우가 채널의 최대 도플러 주파수가 100Hz인 경우보다 $10^{-5}$ BER 근방에서 0.3dB 정도 더 작다. 또한 AOS가 3$^{\circ}$인 경우가 AOS가 $10^{\circ}$인 경우보다 $10^{-5}$ BER 근방에서 1.9dB 정도, 주파수 선택적 페이딩 채널이 주파수 비선택적 페이딩 채널보다 $10^{-5}$ BER 근방에서 1dB 정도 귀환 지연으로 인한 성능의 저하가 작다.

• Journal of KIISE:Information Networking
• /
• v.33 no.4
• /
• pp.289-298
• /
• 2006

Algorithms for application-level multicast often use trees to deliver data from the source to the multiple receivers. With the tree structure, the throughput experienced by the descendant nodes will be determined by the performance of the slowest ancestor node. Furthermore, the failure of an ancestor node results in the suspension of the session of all the descendant nodes. This paper focuses on the transmission of data using multiple virtual forwarders, and suggests a scheme to overcome the drawbacks of the plain tree-based application layer multicast schemes. The proposed scheme elects multiple forwarders other than the parent node of the delivery tree. A receiver receives data from the multiple forwarders as well as the parent node and it can increase the amount of receiving data per time unit. The multiple forwarder helps a receiver to reduce the impact of the failure of an ancestor node. The proposed scheme suggests the forwarder selection algorithm to avoid the receipt of duplicate packets. We implemented the proposed scheme using MACEDON which provides a development environment for application layer multicast. We compared the proposed scheme with Bullet by applying the implementation in PlanetLab which is a global overlay network. The evaluation results show that the proposed scheme enhanced the throughput by 20 % and reduced the control overhead over 90 % compared with Bullet.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.127-134
• /
• 2015

VLC(Visible Light Communication) is the technology to send and receive data by using visible light that LED emits. The basic principle of VLC is the communication by using flashing(ON/OFF) of the light from the LED that changes electricity to light in short time. As the recent advances in LED technology, VLC is also received a lot of attention and the research about it is in progress actively. Especially, the interest about indoor VLC system is increasing because the visible light can't pass through the wall. In this paper, we compose the indoor SISO VLC system with NRZ-OOK and VPPM modulation schemes. Also, we apply SR-ARQ, a kind of re-transmission error control schemes, to the VLC system. And then, we compare and analyze the performance of communication according to the location of receiver and the type of modulation by using BER, the number of transmission and throughput.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1635-1641
• /
• 2017

In this paper, a trellis-coded 3-dimensional (3-D) orthogonal frequency division multiplexing (OFDM) system is presented and its performance is analyzed. Here, a set-partitioning technique for trellis coding with respect to a 3-D signal constellation is also presented. We show theoretically that the proposed system, which exploits a trellis coding scheme with recursive systematic convolutional codes (RSC) of code rate R = 1/3 and 2/3, can improve symbol error rate (SER) up to 7.8 dB as compared with the uncoded OFDM system in an additive white Gaussian noise (AWGN) channel. Computer simulation confirms that the theoretical analysis of the proposed system is very accurate. It is, therefore, considered that the proposed trellis-coded 3-D OFDM system is well suited for the high quality digital transmission system without increase in the available bandwidth.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.5
• /
• pp.37-43
• /
• 2009

Streaming video service over wireless and mobile communication networks has received significant interests from both academia and industry recently. Specifically, mobile WiMAX (IEEE 802.16e) is capable of providing high data rate and flexible Quality of Service (QoS) mechanisms, supporting mobile streaming very attractive. However, we need to note that streaming videos can be partially deteriorated in their macroblocks and/or slices owing to errors on OFDMA subcarriers, as we consider that compressed video sequence is generally sensitive to the error-prone channel status of the wireless and mobile network. In this paper, we introduce an OFDMA subcarrier-adaptive mobile streaming server based on cross-layer design. This streaming server system is substantially efficient to reduce the deterioration of streaming video transferred on the subcarriers of low power strength without any modifications of the existing schedulers, packet ordering/reassembly, and subcarrier allocation strategies in the base station.