• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.147-154
• /
• 2009

Antenna grouping algorithm is hybrid of beamforming and spatial multiplexing. In antenna grouping system, we partition $N_t$ transmit antennas into $N_r$ groups and use beamforming in a group, spatial multiplexing between groups. We can transmit $N_r$ data streams in the $N_t{\times}N_r$ antenna grouping system. With antenna grouping, we can achieve diversity gain through beamforming, and high spectral efficiency through spatial multiplexing. But if channel is ill-conditioned or there are some correlations between antennas, the performance of antenna grouping is seriously degraded and in that case, beamforming is the best transmit strategy. By selecting the antenna grouping mode when channel is well-conditioned and by selecting the beamforming mode when channel is ill-conditioned, we can prevent serious fluctuation of BER performance caused by varying channel condition and achieve the best BER performance. In this paper, we investigate mode selection algorithm which can select antenna grouping mode or beamforming mode. we also propose a simple mode selection criterion.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.101-107
• /
• 2009

Growth in the VLSI process and design technology is resulting into a continuous increase in the number of IPs on a chip to form a system. Because of many IPs on a single chip, efficient communication between IPs is essential. We propose a dynamically reconfigurable 3-layer bus structure which can adapt to the pattern of data transmission to achieve an efficient data communication between various IPs. The proposed 3-layer bus can be reconfigured to multi-single bus mode, and single-multi bus mode, thus providing the benefits of both single-bus and multi-bus modes. Experimental results show that the flexibility of the proposed bus structure can reduce data transmission time compared to the conventional fixed bus structure. We incorporated the proposed bus structure in a JPEG system and verified that the proposed structure achieved an average of 22% improvement in time over the conventional fixed bus structure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.497-499
• /
• 2013

In this paper, electrical lengths and impedances of a dual-mode resonator are calculated by using the transfer function of a dual-mode resonator by realizing the short-stub. The electrical length of transmission-line for a resonator is function of the frequency and the electrical length of stub is defined by the frequency and impedances of line and stub. Also, the inverter value of a bandpass filter using the dual-mode resonator is calculated. The effect of stub's impedance for inverter is very small. And, as the impedance of line is decreasing, the inverter value is increasing and as the bandwidth is increasing, the inverter value is increasing.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.501-511
• /
• 2023

This paper introduces and analyzes SAE J2716 SENT (Single Edge Nibble Transmission) protocol, a technical standard for serial transmission of digital sensor data in automotive applications. SENT can transmit both high-speed sensor data and low-speed sensor data in one data frame and has a total of 6 transmission modes, including 3 high-speed channel modes and 3 low-speed channel modes. In this paper, a SENT controller that supports all six modes of the SENT protocol was designed in Verilog HDL, implemented in FPGA, and verified with an oscilloscope and PC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.9A
• /
• pp.1592-1600
• /
• 2001

본 논문에서는 IMT-2000을 위한 이중 모드 패킷 전송 방식에 대한 성능을 분석하고, 동적 임계치 설정을 이용한 이중 모드 패킷 전송 방식을 제안한다. 먼저, 다양한 채널 환경과 트래픽 유형을 고려하여, 공용 채널과 전용채널 간의 모드 전환을 위한 임계치의 변화에 따른 성능의 변화를 고찰하였다. 성능 분석 결과, 채널 환경과 트래픽 형태에 따라서 스위칭 임계치 설정이 매우 중요하며, 성능에 큰 영향을 미치게 된다는 것을 알 수 있었다. 그리고, 이중 모드 방식에서 스위칭 임계치를 동적으로 설정하는 방식을 제안하고 시뮬레이션을 통해 성능을 분석하였다. 제안된 동적 임계치를 사용할 경우에 채널 상황이나 트래픽 특성 변화에 적응적으로 대처할 수 있어, 전반적으로 고정 임계치 방식보다 성능이 크게 개선됨을 알 수 있었다.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.301-304
• /
• 2001

이 논문에서는 미국과 유럽에서 디지털 CATV 전송 방식으로 각각 채택하고 있는 Opencable 시스템과 DVB-C 시스템의 전송성능을 비교하였다. 채널 환경의 신호손상요소는 랜덤잡음과 CTB (Composite Tripple Beats) 잡음을 고려하였다. 전송성능을 비교하기 위하여 각 전송시스템에 대한 모의실험장치를 S/W적으로 구현하여, 각 잡음 값에 따른 BER(Bit Error Rate) 값을 구하였다. 동일한 조건에서 모의실험을 실시한 결과, 64-QAM 모드에서는 Opencable 방식이 우수하고, 256-QAM 모드에서는 두 가지 전송방식의 성능이 비슷하다는 결과를 얻었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.447-452
• /
• 2011

In this paper, we present a compact triple-mode resonator. The resonator itself can provide three transmission poles and one transmission zero. The resonance condition of each mode is analyzed theoretically, and the transmission zero is generated by open stub. Using this proposed resonator, a compact three pole bandpass filter for 2.4 GHz WLAN application with one transmission zero is designed and fabricated. The fabricated triple-mode filter shows 3 dB bandwidth of 15.8 % with the center frequency 2.4 GHz and less then 1.17 dB in 2.4~2.5 GHz passband. The size of fabricated triple-mode filter including the feed lines is 15.9 mm${\times}$9.7 mm and very compact compared with previous reported triple-mode filter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.291-292
• /
• 2014

High-speed video transmission modes of master bridge IC are implemented, which supports MIPI (Mobile Industry Processor Interface) DSI (Display Serial Interface) standard. MIPI DSI master bridge IC sends RGB data and various commands to display module (slave) in order to test it. The master bridge IC consists of buffers storing video data of two lines, packet generation block, and D-PHY layer that distributes packets to data lanes and transmits them to slave. In addition, it supports four bpp (bit per pixel) formats and three transmission modes including Burst and Non-Burst (Sync Events, Sync Pulses types). The designed bridge IC is verified by RTL simulations showing that it functions correctly for various operating parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5A
• /
• pp.511-520
• /
• 2011

In this paper, we introduce a multiuser (MU) scheduling method for multiuser amplify-and-forward relay systems, which selects both the transmission mode, i.e., either one- or two-hop transmission, and the desired user via two steps. A closed-form expression for the average achievable rate of the proposed scheduling is derived under two transmission modes with MU scheduling, and its asymptotic solution is also analyzed in the limit of large number of mobile stations. Based on the analysis, we perform our two-step scheduling algorithm: the transmission mode selection followed by the user selection that needs partial feedback for instantaneous signal-to-noise ratios (SNRs) to the base station. We also analyze the average SNR condition such that the MU diversity gain is fully exploited. In addition, it is examined how to further reduce a quantity of feedback under certain conditions. The proposed algorithm shows the comparable achievable rate to that of the optimal one using full feedback information, while its required feedback overhead is reduced below half of the optimal one.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.12-14
• /
• 1999

H.263+[1]는 1996년에 비디오압축 표준안으로 확정된 H.263의 확장으로 현재 널리 퍼져 있는 저 전송률의 가정용 전화선을 위한 비디오 압축에 관한 표준안으로 1988년에 확정되었다. H.263+의 기본 알고리즘은 H.263과 같으나 사용상의 편의를 위한 여러 선택모드와 이종의 네트워크환경에서 발생하는 대역폭의 변화나 에러를 위한 scalability(계층부호화)와 같은 새로운 기능이 추가되었다. 새로운 표준안에 따른 실시간 비디오 전송을 처리하기 위해서 필연적으로 하드웨어 코덱의 개발 필요성이 대두되고 있으며 실시간 비디오 코덱은 영상회의 전화기나 멀티미디어 전송시스템의 핵심기술로써 적용될 수 있다. 본 논문에서는 ITU-T H.263+의 기본모드와 새로이 추가된 선택모드 일부를 지원하는 코덱을 하드웨어 기술 언어인 VHDL(VHSIC Hardware Description Language)을 사용하여 기술하고 각 모듈과 최상의 모듈을 시뮬레이션하여 동작을 검증했다.