• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.121-125
• /
• 2008

In this study, the characteristics of internal flow and the heat transfer performance of dimpled plate heat exchanger were numerically investigated. For the numerical analysis, conjugate heat transfer method between cold fluid - plate - hot fluid was studied with appropriate boundary conditions. Velocity magnitude, temperature and pressure distribution were obtained from the simulation. Correlations for fanning f-factor and Colburn j-factor were obtained from numerical results and compared to the experimented data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.328-331
• /
• 2008

A literature survey has been reported of the systems analysis on the liquid rocket engines. The analysis tools are mainly about the calculation of the rocket engine performance at the early days. However recent trend shows that researchers try to develop an integrated environment of distributed analysis tools for faster and cheaper analysis. This article presents the systems analysis results of the liquid rocket engine of gas generator cycle using the published mass estimating model. The specific impulse change for various thrust to weight ratio agrees qualitatively well with the published data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.138-141
• /
• 2008

The screen doors installed in the station of subway are subject to the train-wind pressure caused by the operation of trains. The train-wind pressure has to be correctly estimated for the design of safe structure of screen doors. As three-dimensional numerical flow analysis technology has been significantly developed, the analysis on the train-wind pressure with diverse variables such as train specifications, train speed, tunnel and station configurations, and blockage ratio can be effectively carried out with three-dimensional numerical method. In this study, computational analysis of train-induced wind in a subway tunnel employing the screen doors are carried out by using the three-dimensional numerical method with the model of the moving boundary for the run of trains. While the numerical analysis of train-wind pressure was applied on the one island-type station in the Seoul Subway Line 2, maximum pressure of 494 Pa was estimated on the screen door when two trains pass each other at the speed of 80km/h in the platform.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.551-554
• /
• 2008

In this study, numerical methods for the code development of the interior ballistics have been conducted. Mathematical models and numerical methods for the analysis technique of the granular solid propellants have been investigated. As the results of applying the methods of errors have been generated by calculation for the specific surface area of the granular solid propellants. To remove these error, the developed Eulerian-Larangian method for multiphase flows has been suggested.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.572-575
• /
• 2008

Two-dimensional multiphase flows due to density difference such as the Rayleigh-Taylor instability problem and the droplet splash are simulated by an in-house solution code(PowerCFD). This code employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method in a volume of fluid(VOF) scheme for phase interface capturing. The present results are compared with other numerical solutions found in the literature. It is found that the present code simulates complex free surface flows such as multiphase flows due to density difference efficiently and accurately.

• 한국전산유체공학회지
• /
• 제8권1호
• /
• pp.23-29
• /
• 2003

Two nonlinear κ-ε models with the wall function method are applied to the fully developed turbulent flow in a square duct. Typical predicted quantities such as axial and secondary velocities, turbulent kinetic energy and Reynolds stresses are compared in details both qualitatively and quantitatively with each other. A nonlinear κ-ε model with the wall function method capable of predicting accurately duct flows involving turbulence-driven secondary motion is presented in the present paper. The nonlinear κ-ε model of Shih et al.[1] adopted in a commercial code is found to be unable to predict accurately duct flows with the prediction level of secondary flows one order less than that of the experiment.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.125-129
• /
• 2007

In this paper a method for the design optimization for helicopter rotor blade in hover is studied Numerical analysis of aerodynamic characteristics of the flow around a rotor blade is analysed by usign panel method and CFD code based on Navier-Stokes equation. The result is validated by comparing with existing experimental result. Optimization methods RSM(Response Surface Method) and DOE(Design of Experiments) are applied in combination. The object functions are power, twist angle, taper ratio, and thrust. The optimized result showed a decrease of 17% of the power required.

• EDISON SW 활용 경진대회 논문집
• /
• 제1회(2012년)
• /
• pp.17-20
• /
• 2012

본 연구는 전산유체해석 프로그램인 EDISON_CFD를 이용하여 NACA63-425 에어포일과 이 에어포일을 기반으로 만든 뒷전 두께가 2% 4%인 NACA63-425G02, NACA63-425G04에 대하여 두께 변화에 따른 공력 특성 변화를 수치해석을 수행 하였다. 난류점성내의 압축성 조건에서 받음각에 따른 양력계수, 항력계수, 양항비 등을 비교하여 Flatback 에어포일의 장단점에 대하여 결과를 분석해 보았다.

• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.637-642
• /
• 2014

선행 연구에서 블레이드 뒷전에 탄성 플랩이 장착되면 받음각에 따라 양력의 증가가 항력의 증가보다 상대적으로 더 커지게 되어 전체적인 양항비(앙력과 항력의 비)가 증가하는 것을 확인하였다. 본 논문에서는 선행의 연구를 참조하여 플랩의 길이가 변함에 따라서 양력과 항력의 변화를 비교하였다. 블레이드의 종류와 플랩의 제원은 현재 이용되는 수직축 풍력 발전기의 제품과 동일하게 사용하였다. EDISON_CFD와 MIDAS_IT를 이용하여 플랩이 장착된 블레이드 주변의 유체 유동을 해석하고, 플랩의 상하변위를 계산하였다. 이 과정을 반복 수행하여 플랩의 거동을 분석하고 플랩의 길이와 받음각에 따른 양항비를 비교하여 이전보다 효율적인 플랩을 설계하였다.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.594-599
• /
• 2015

활주로에서 발생하는 측풍이나 돌풍 등은 항공기의 이 착륙 안정성에 큰 영향을 미친다. 일반적으로 활주로를 건설 할 때 측풍에 대하여 많은 고려를 하지만, 이는 단순히 건설지형 주변에서 발생되는 기상 현상에 대한 데이터를 사용할 뿐 활주로가 완성된 이후에는 활주로 주변 지형 및 환경이 변하게 되어 활주로 건설 초기에 측정된 풍향이나 풍속이 크게 변할 수 있다. 따라서 측풍이 불어올 때, 활주로 주변 시설물에 의한 유동변화가 항공기의 이 착륙 비행 안정성에 미치는 영향이 고려되어야 하다. 본 연구에서는 3차원 형상의 활주로와 주변 시설물을 2차원으로 가정하여 활주로 주위 유동해석을 전산유체역학을 통해 계산하고, 유동변화가 이 착륙하는 비행기에 미치는 영향을 알아본다.