• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.438-440
• /
• 1998

본 논문에서는 복부의 전산화 단층촬영 영상으로부터 체지방의 양을 측정하기 위한 영상처리에서 사용되는 문턱치의 자동 설정 방법을 제안한다. 체지방의 정량적 측정은 비만과 관련된 진단 및 치료에 있어서 중요하다. 기존의 비만도 측정은 체중과 신장의 비, 허리와 둔부 둘레의 비, 손으로 잡히는 복부의 두께 등 단순한 측정방법을 사용하여 실제 지방의 양을 제대로 반영하지 못하는 단점이 있다. 이러한 단점을 보완하기 위하여 최근에 전산화 단층촬영 영상으로부터 영상처리를 통하여 직접 지방의 양을 측정하려는 시도가 있다. 전산화 단층촬영 영상을 이용하면 지방의 양을 정량적으로 측정할 수 있고 피하지방과 복강내지방 등 특정부위의 체지방의 양을 측정할 수 있다. 전산화 단층촬영은 밀도에 비례하는 하운스필드 단위 값으로 구성된 영상을 제공한다. 일반적으로 체지방은 하운스필드 단위 값이 -150에서 -50사이인 것으로 알려져 있다. 그러나, 체지방의 문턱치는 사람에 따라 다르고, 또한 같은 사람에 대해서도 촬영 부위에 따라 다르다. 본 논문에서는 이러한 차이를 히스토그램을 통하여 보이고 히스토그램의 가우시안 함수 근사로부터 체지방의 문턱치를 자동으로 설정하는 방법을 제안한다.

• 대한방사선방어학회:학술대회논문집
• /
• 2010.04a
• /
• pp.64-65
• /
• 2010

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.1
• /
• pp.44-53
• /
• 2006

In this study, the non-destructive computed tomography was adopted to observe the density profile of the needle-punched Carbon/Carbon(C/C) composites nozzle throat. The density profile of C/C was evaluated within ${\pm}0.01g/cm^3$ with 98.74% confidence when the correction of the image and high signal-to-noise ratio were achieved by the optimization of the beam hardening, the electrical noise and the scattered X-ray. The density variation of C/C with the computed tomography was in good agreement with the results obtained by the water immersion method and the observation with scanning electron microscope.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.25-29
• /
• 2006

The object of this study is to develop new examination techniques for measuring the O-ring deformation behavior under the pressure condition. The extrusion lengths measured from the computed tomography were in good agreement with the results that measured from non-contact laser displacement sensor. The deformed shapes of O-ring measured by the computed tomography and evaluated by the FEM agreed well with the extrusion length and the expanded diameter. But the contact widths of the O-ring and steel measured by the computed tomography were a little larger than the results of the FEM.

• Journal of Chest Surgery
• /
• v.31 no.3
• /
• pp.298-303
• /
• 1998

Computerized tomography(CT) is an effective technique in the initial evaluation of the abdomen and head following blunt trauma. To evaluate the efficacy of CT of the thorax, a retrospective study comparing early thoracic CT scanning with initial chest roentgenogram (CXR) was carried out on 134 patients with blunt trauma on the chest. Among 134 patients, 45 patients had normal initial chest roentgenogram and 24 patients showed normal CT findings. Sensitivities of diagnosing pneumothorax and pleural effusion by CXR were low (46.2 and 62.9% respectively), whereas 71.4%(45/63) of patients had thoracostomy only by CXR. Although sometimes abused, CT of the thorax is effective in the initial diagnosis.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.199-200
• /
• 2014

저선량 흉부 전산화단층촬영을 이용한 페암의 대한 조기검진 시기도 남녀공통 40세 이상을 시작연령으로 제시하고 있으나 조기검진의 연령확대로 인하여 다양한 연령층에서 시행하고 있다. 이에 본 연구에서는 임상적 증상이 없는 자기결정에 의해 저선량 흉부 전산화단층촬영을 시행한 건강검진 대상자를 대상으로 40세 전후로 구분하여 진단적 효용성과 저선량 흉부 전산화 단층촬영의 대한 바람직한 방향을 제시하고자 한다. 분석한 결과 결절의 개수는 유의하게 나타났으나 방사선 피폭에 대한 전체적인 위해와 이득에 대한 정당성 확보가 이루어지지 않았다. 저선량 흉부 전산화단층촬영 정당성 확보를 위해 흡연력 있는 40대 이상을 시작연령으로 해야 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.469-474
• /
• 2005

Tn this study, the noll-destructive computed X-ray tomography was adopted to observe the density distribution of the needle-punched C-C composites nozzle throat. The density distribution of the C-C was evaluated within ${\pm}0.01g/cm^3$ with 98.74% confidence when the correction of the image and high signal-to-noise ratio were achieved by the optimization of the beam hardening, the electrical noise and the scattered X-ray. The density variation of the C/C with the computed tomography was in good agreement with the results obtained by the water immersion method and the observation with scanning electron microscope.

• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.226-232
• /
• 2009

Background: Blunt chest trauma accounts for 90% of all chest traumas in Europe and the United States and this causes 20% of all trauma-related deaths. The major cause of morbidity and mortality after blunt chest trauma is undetected injuries. For this reason, chest computerized tomography has gained popularity for the evaluation of trauma, but it is expensive and it exposes patients to radiation. This study identified the clinical features associated with the diagnosic information obtained on a CT chest scan, as compared with a standard chest X-ray, for patients who sustained blunt trauma to the chest. This study also evaluated the role of a routine computed tomographic (CT) scan for these patients. The patients who had chest computed tomography done after the initial chest x-ray were analyzed separately for the presence of occult injuries. Material and Method: We studied 100 consecutive patients from November 2006 to July 2007: 74 patients after motor vehicle crashes and 26 patients after a fall from a height >2m. Simultaneous with the initial clinical evaluation, an anteroposterior chest radiograph and a helical chest CT scan were obtained for all the patients. The data extracted from the medical record included the vital signs, the interventions and the type and severity of injury (RTS). Result: Among the 100 cases, 79 patients showed at least more than one pathologic sign on their chest radiograph, and 21 patients had a normal chest radiograph. For 17 of the patients who had a normal chest X ray, the CT scan showed multiple injuries, which were pneumothorax, hemothorax, lung contusion, sternal fracture etc. This represents that a CT scan is statistically superior to a chest radiograph to diagnose the pathologic signs. But on the other hand, as for treatment, only 31 patients were diagnosed by CT scan and they were treated with chest tube insertion ect. 42 patients needed ony conservative management without invasive thoracosurgical treatment such as chest tube insertion or open thoracotomy. 27 patients were treated based on the diagnosis made by the chest radiograph and physical examination. Conclusion: Chest computerized tomography was significantly more effective than routine chest X-ray for detecting lung contusion, pneumothorax and mediastinal hematoma, as well as fractured ribs, scapula and, sternum. Although the occult findings increased, the number of patients who needed treatment was small. Therefore, we suggest making selective use of a CT scan to avoid its overuse in ERs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.3
• /
• pp.273-279
• /
• 2012

Purpose : This study was aimed to calculate effective dose from cone beam CT and compare effective dose from periapical and panoramic radiography for mesiodens. Materials and Methods : Upper anteiror periapical, panoramic radiography and cone-beam CT were taken for diagnosis of mesiodens. The effective dose were calculated by using an anthropomorphic phantom loaded with thermoluminescent dosimeters at the 23 sites related to sensitive organs. Results : The highest absorbed doses were received by the mandibular body, parotid gland and cheek from periapical, panoramic and cone-beam CT, respectively. The effective doses for periapical, panoramic radiography and cone-beam CT measured 2, 18 and 48 ${\mu}Sv$. Conclusion : Cone-beam CT, although providing additional diagnostic benefits, exposes patients to higher levels of radiation than conventional periapical and panoramic radiography.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2008

The object of this study is to develop the examination technique for measuring the O-ring deformation behavior under the pressure and the squeezed condition simultaneously. The O-ring deformation measuring device in which two grooves were dug to insert the two O-rings was manufactured to be not deformed under the high pressure and the 1 mm and 0.1 mm gap were designed to measure the extrusion lengths under the internal pressure. The beam hardening correction, the histogram analysis and the dead zone correction were executed to exactly measure the shape of O-ring deformation and the lengths of the O-ring deformation were measured by the LSF and the ERF. The computed tomography applied the pressure of 0, 1.378, 4.902, 9.804, 15.692 MPa at 22.3% squeezed condition and the expanded diameter, contact length and extrusion depth were measured in each pressure. The shape of O-ring deformation was evaluated by the FEM to verify the results of measuring by the computed tomography and the area of O-ring was mutually compared to the area measured by the computed tomography.