• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.537-542
• /
• 2012

Rolling stocks are often subjected to the effects of natural strong wind or wind pressure caused by the crossing train. These wind pressure cause the falling-off in running stability and overturn safety. It is sometimes reported that trains are blown over by a gust of wind. So, many countries enact regulations to secure the overturn safety for wind speed. In this study, theoretical equations of overturn safety based on multi-body model are derived and analyzed the difference between the result of the solid model and that of multi-body model. In case of multi-body model, it is assumed that the degrees of freedom for carbody and bogie are assigned an independent values respectively. The results show that the latter approach based on multi-body model can access the overturn safety of train and replace the conventional method by using commercial software which is accessing with decrement of wheel load.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.956-964
• /
• 2017

This study contributes to deepening understand of the characteristics of fishing vessel rolling motions to improve the development of capsizing alarm systems. A time domain rolling motion simulation was performed. In order to verify capsizing alarm systems, it is necessary to carry out experiments assuming a capsizing situation and perform actual fishing vessel measurements, but these tasks are impossible due to the danger of such a situation. However, in many capsizing accidents, a close connection with rolling motion was found. Accordingly, the rolling motion of a fishing boat, which is the core of a fishing vessel capsizing alarm system, has been accurately measured and a time domain based on a rolling motion simulation has been performed. This information was used to verify the algorithm for a capsizing alarm system. Firstly, the characteristics of rolling motion were measured through a motion experiment. For small vessels such as fishing vessels, it was difficult to interpret viscosity due to analytical methods including CFD and potential codes. Therefore, an experiment was carried out focusing on rolling motion and a rolling mode RAO was derived.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.385-391
• /
• 2014

A wheeled armored vehicle is a military vehicle that has been developed to enhance combat capabilities and mobility for the army. The wheeled armored vehicle has a high center of gravity, and it operates on unpaved and sloped roads. Therefore, this vehicle has a high risk of rollover crashes. To design the interior of the military vehicle, the crew's safety during rollover crashes is an important factor. However, actual vehicle tests for design are extremely expensive. In this paper, nonlinear dynamic analysis is performed to simulate the rollover crashes and the passenger injury is assessed for a wheeled armored vehicle. The scope of this research is the rollover condition, FE modeling of the wheeled armored vehicle and the dummy, arrangement of dummies, assessment of passenger injuries, and simulation model for rollover crashes.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.574-578
• /
• 2011

본 논문에서는 해저케이블 부두 하역용 장비인 코일링 암(coiling arm)에 대한 구조설계 및 해석을 수행하였다. 본 연구에서는 구조설계를 위해 3차원 CAD프로그램을 이용하여 모델링하였고 구조해석 프로그램을 이용하여 유한요소법에 기초한 전산해석 기법으로 해석을 수행하였다. 코일링 암의 목적에 맞추어 케이블을 케이블 탱크에 가이드 할 수 있도록 베어링 및 롤러를 설계하여 메인 암이 회전하고 케이블 가이드가 이동할 수 있도록 하였고, 기존의 외국 모델에서 사용하던 와이어 및 모터 시스템을 이용한 케이블 가이드 작동방식을 유압 시스템을 이용한 작동방식으로 변경하여 설계 및 제작이 쉽고 사용자가 직관적으로 작동할 수 있도록 설계하였다. 자중 및 케이블 하중에 대한 응력 해석을 수행하였고, 유압시스템에 의한 파손 가능성을 고려하였다. 케이블 가이드에 이동 및 지면 경사도에 따른 전복해석을 수행하였으며, 설치 장소를 고려한 풍하중 효과도 추가로 고려하였다. 본 연구를 통해 코일링 암의 작동방식을 개선하였으며 설계 및 해석 방법을 확립과 더불어 국내 최초로 실제 코일링 암을 제작 및 설치하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1031-1037
• /
• 2021

The frequency of marine accidents of vessels in Korea is steadily increasing and it is concentrated on small vessels with less than 10 tons of gross tonnage. Therefore, preventing capsizing accidents in small vessels is important to reduce the cost in terms of human and property damage due to such accidents. However, research on the seakeeping performance of small vessels has been insufficient, and there are no domestic and international regulations on seakeeping performance. Therefore, in this study, capsizing accidents caused by poor loading conditions were investigated by examining the adjudications of the small vessels in which the capsizing accidents occurred. Hydrostatic calculations and seakeeping performance analysis were performed for a representative vessel. A vessel generally performs a six-degree-of-freedom motion during operation. In this study, the response amplitude operator and response spectrum of a representative vessel were calculated to determine the roll motion. Moreover, a short-term statistical analysis of the vessel according to the loading conditions was performed for the wave stationary status for 3 h. From the results, it was estimated that, when the loading condition of a small vessel is poor, its roll motion increases, greatly reducing its stability.

• Journal of the korean Society of Automotive Engineers
• /
• v.31 no.3
• /
• pp.36-46
• /
• 2009

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.385-386
• /
• 2005

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.227-235
• /
• 2018

Along with the recent increase in traffic volume of vehicles, accidents involving rollover of vehicles have been rapidly increased, resulting in an increase casualties. And to prevent this, various technologies such as vehicle crash test equipment and analysis program development have been advanced. In this study, the applied vehicle model is FORD EXPLORER model, and PC-Crash program for vehicle collision analysis is used to predict the rollover accident behavior of SUV and the collision velocity. Compared with the actual rollover behavior of SUV through the FMVSS No 208 regulations, the analysis results showed similar results, the characteristics of the collision velocity and roll angle showed a tendency that the error rate slightly increased after 1000 msec. Then, as a result of considering using the database of NHTSA, it is shown that the rollover accident occur most frequently in the range of the collision velocity of 15~77 km/h and the collision angle of $22{\sim}74^{\circ}$. And it is possible to estimate the vehicle speed and collision time when the vehicle roof is broken by reconstructing the vehicle starting position, the roof failure position and the stop position by applying the actual accident case.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.50-54
• /
• 2016

해양사고 원인규명 통합 분석 시뮬레이션 시스템은 해양사고가 발생하는 과정(선회)을 포함하여 충돌, 좌초, 접촉, 전복, 침수 및 침몰 등의 해양사고를 유체-구조 연성 해석기법의 고도 정밀 M&S 시스템을 사용하여 과학적으로 해양사고의 원인을 분석하고 사고의 손상과정을 체계적으로 재현할 수 있는 시스템이다. 해양사고는 육상과 공중에서 발생하는 자동차와 비행기 등의 충돌이나 추락사고와는 달리 공기의 밀도보다 천배의 물에서 발생하므로 물에서 부양되고, 운동하고, 선내에 물이 침수되고, 운항 중일 때 파도도 생성시키고, 두 물체가 근접할 경우에는 압력이 압착되고, 두 물체가 스쳐 지나거나 안벽이나 해저를 근접하여 운항할 경우에는 압력이 저하되는 등 물에서의 연성효과(interface effect)를 충분히 고려하여 재현할 수 있어야 정확하게 해양사고의 원인을 규명 및 분석할 수 있을 것이다. 또한 황천에서 발생하는 해양사고일 경우에는 강한 조루, 강풍 및 해일성 파도 등을 불규칙 스펙트럼을 사용하여 정확히 구현하여야 황천에서 발생하는 해양사고의 원인을 충분히 분석할 수 있을 것이다. 이러한 해양사고 통합 분석 시뮬레이션 시스템을 이용하여 과학적이고 정확한 해양사고의 원인규명 및 분석으로 심판의 획기적인 신뢰 구축과 심판 지연에 따른 사회적 비용을 최소화하고, 해양사고의 원인과 과실 책임, 나아가서 사고 재발방지 대책수립 등에도 활용하는데도 크게 기여할 것으로 사료된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.22-31
• /
• 2006

Recent studies have shown that the short time solution of the equation of motion for the rolling of ships is important in deciding the possibility of capsize of ships due to the excessive heel. Since most of known solutions for nonlinear equations of motion are long time or steady periodic solutions, here a simple way is described to get the short time solutions of the Duffing equation, which was chosen for deriving a criterion for the capsize of the ship. With the small external rolling moment, we first assume the state of the small damping and near resonance. Then, for cases when the frequency of the external moment is higher than the resonant one, an inequality was derived as a criterion for the capsize. This gives the range of the initial condition and the magnitude of the external moment which should be avoided for a ship to be safe from capsize. Furthermore, from the linearized equation, it is also shown that a simple and self-explanatory solution can be obtained consistent with that for the case of no damping, which yields the well-known linear growth with time.