• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.247-248
• /
• 2001

부착성 규조류는 전복의 인공종묘생산시 초기유생의 먹이로 널리 사용되고 있다. 현재 전복 종묘생산은 각장이 7∼8 mm가 될 때까지 투명 플라스틱 파판에 부착하는 미세조류를 자연발생시켜 먹이로 사용하는 방법에 의존하고 있다 (Hahn, 1989). 전복유생은 파판에 부착하여 먹이를 먹기 시작하는 시기부터 각장이 약 3 mm가 되는 시기까지 부착성 규조류를 먹이로 성장하는데 자연발생적 부착규조는 성장함에 따라 체인을 형성하면서 고밀도로 부착시 탈락과 동시에 치패가 탈락되고, 전복치패의 성장속도에 비해 파판에 부착된 규조류의 성장속도가 느려 먹이부족 현상으로 인한 생존율이 감소되는 문제점을 가지고 있다. (중략)

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.812-817
• /
• 2011

Rolling stocks are often subjected to the effects of natural cross wind or train wind pressure due to the crossing train. These wind pressure cause the falling-off in running stability and turnover problem. It is sometimes reported that trains are blown over by a gust of wind in overseas. So, many countries enact regulations to secure the safety for wind speed. In this study, we analyzed the difference between the regulation for turnover safety of train which was enacted by Ministry of Land. Transport and Maritime Affairs and that based on the multi-body model. In case of multi-body model, it is assumed that the degrees of freedom for carbody and bogie are assigned an independent values respectively. The results show that the latter approach based on multi-body model can access the safety of turnover and replace the computational method which is accessing with lateral force, derailment coefficient and decrement of wheel load.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.22-30
• /
• 2020

In March 2016, a 6.67-ton fishing boat capsized owing to the loss of stability during crane operations. Capsizing occurs when a boat or ship is flipped over (or turned upside down) for reason other than accidents caused by collisions, contact, stranding, fire or explosion. Over the past nine years (2010-2018), capsize accidents have accounted for 2.34 % of all marine accidents and are gradually increasing. The loss of stability from improper shipping is the main cause of most capsizes, especially for small fishing vessels weighing 10 tons. According to the Fishing Vessel Act, small fishing vessels weighing less than a ton are exempted from inspections on stability and load cranes. This study analyzes the issue cited as the reason for the capsizing of the small fishing boat in Goseong, namely, the reduction of restoring moment due to increased weight of the crane. Fishing boats with similar loading conditions were modeled on the basis of re-determination, and their stability before and after the accident was assumed. The fishing boats with heavier cranes were found to be at higher risk of capsizing owing to the reduction of the restoring moment and the angle of deck immersion. Under standard loading conditions, the stability moments of fishing vessels are lesser during fishing, compared to when they depart from or arrive at the port.

• Composites Research
• /
• v.21 no.1
• /
• pp.22-29
• /
• 2008

This paper presents the evaluation of crashworthiness and rollover characteristics of low-floor bus vehicles made of aluminum honeycomb sandwich composites with glass-fabric epoxy laminate facesheets. Crashworthiness and rollover analysis of low-floor bus was carried out using explicit finite element analysis code LS-DYNA3D with the lapse of time. Material testing was conducted to determine the input parameters for the composite laminate facesheet model, and the effective equivalent damage model for the orthotropic honeycomb core material. The crash conditions of low-floor bus were frontal accident with speed of 60km/h. Rollover analysis were conducted according to the safety rules of European standard (ECE-R66). The results showed that the survival space for driver and passengers was secured against frontal crashworthiness and rollover of low-floor bus. Also, The modified Chang-Chang failure criterion is recommended to predict the failure mode of composite structures for crashworthiness and rollover analysis.

• Food Science and Preservation
• /
• v.20 no.4
• /
• pp.441-450
• /
• 2013

In this study, the general compositions, amino acids, fatty acids and collagen content of three abalones, which were harvested in Wando, Heuksando and Jeju Island in Korea, were analyzed and compared. The abalone body and viscera were separated from each other and the physicochemical properties were investigated. The moisture and protein contents of the viscera were lower than that of the body; while the lipid, carbohydrate, and mineral contents were higher. The general compositions and mineral contents also presented fluctuation among the three abalone groups. The amino acid content via hydrolysis in the abalone viscera ranged from 93.16 to 127.02 mg/g, which was lower than the amino acid content of the abalone body of approximately 145 mg/g. However, the free amino acids level in the abalone viscera ranged from 16.81 to 20.10 mg/g, which was higher than that of the abalone body level of approximately 7.90 to 10.59 mg/g. The fatty acid analysis revealed that while the saturated fatty acid percentages in the abalone body were higher than in the abalone viscera, the percentages of the monoenoic and polyenoic fatty acids of the body were significantly lower. The body of the abalone harvested in Wando contained the highest level of collagen ($2.26{\pm}0.46mg/g$), followed by the abalone harvested in Jeju Island and Heuksando. The abalone viscera contained much lower collagen, which ranged from $0.37{\pm}0.15mg/g$ to $0.20{\pm}0.03mg/g$. The results of this study will provide useful information for the future research of abalone.

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.598-606
• /
• 2015

To develop a functional drink using abalone, two abalone composites (APM-1, APM-2) were prepared by mixing the abalone and natural plants (Lycii fructus and Rubus coreanus Miq.). Their antioxidant and anti-fatigue effects were evaluated using rats running on a treadmill after 4 weeks supplementation of the abalone composites. Experimental groups were divided into four groups including normal (non-exercised group), control (exercised group), one dose per day (EAPM-1), and three doses per day (EAPM-2) with exercise by running. Antioxidant activities, and total phenols and flavonoids contents of APM-2 were significantly higher than those of APM-1 (p<0.05). Total lipid content in serum of EAPM-2 was significantly lower than that of control group (p<0.05). Lactate dehydrogenase activity and blood urea nitrogen content of EAPM-1 and EAPM-2 groups were significantly lower than that of control group. There were no significant difference in aspartate aminotransferase activity among control, EAPM-1 and EAPM-2 groups. In the meanwhile, alanine aminotransferase and alkaline phosphatase activities were significantly lower than that of control group. In serum and liver tissues of EAPM-1 and EAPM-2 groups, lipid peroxide contents significantly decreased compared to control group. DPPH radical scavenging activities in liver tissues of EAPM-1 and EAPM-2 groups were significantly higher than those of control group. Therefore, abalone composites were effective for the alleviation of oxidative stress caused by treadmill running, which was dependent on antioxidant activity and phenolic compounds content.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.537-542
• /
• 2012

Rolling stocks are often subjected to the effects of natural strong wind or wind pressure caused by the crossing train. These wind pressure cause the falling-off in running stability and overturn safety. It is sometimes reported that trains are blown over by a gust of wind. So, many countries enact regulations to secure the overturn safety for wind speed. In this study, theoretical equations of overturn safety based on multi-body model are derived and analyzed the difference between the result of the solid model and that of multi-body model. In case of multi-body model, it is assumed that the degrees of freedom for carbody and bogie are assigned an independent values respectively. The results show that the latter approach based on multi-body model can access the overturn safety of train and replace the conventional method by using commercial software which is accessing with decrement of wheel load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.385-391
• /
• 2018

Abalone aquacultural industry has been growing rapidly in a short period of time, however, there has been just a few researches related to the forecast of the supply, demand and price. Even the models developed by these researches have problems of low compatibility and reliability. To resolve these problem, a biological supply model needs to be developed that maintains time difference and linkage among the quantity of juvenile abalone into the plots, quantity of cultivation, quantity of shipment, and at the same time juvenile abalone is transplanted into the plot, matured and shipped by the expected market price. This study focus on the development of the model for determining quantity of the abalone cultivation, which is the core part of the entire abalone demand and supply model. Key factors that affect cultivation quantity were identified and verified the causal relationship among these variables and cultivation quantity. It turned out that the quantity of juvenile abalone transplanted and the relative price(the abalone price of the place of produce divided by the brown seaweed price) have a great influence on the cultivation quantity. Also, the similarity of the variation for the cultivation quantity of the observed value and the forecasted value implies that the model developed in this study has a high compatibility.

• Journal of fish pathology
• /
• v.29 no.1
• /
• pp.35-43
• /
• 2016

In comparison to the numbers of such studies of fish, few studies have been carried out on the immunity, physiology and ecology of abalone, while studies on abalone disease are also extremely rare. Moreover, mass mortality of cultured abalone due to pathogenic bacteria has not been reported in the southern coast of Korea. However, Vibrio-like bacteria have been isolated from dead abalone, which indicates that a review is required in order to determine the cause of abalone mortality. Use of an antimicrobial agent to minimize the damage caused by disease in abalone farms is common, but the therapeutic effects are insignificant. Demand for probiotics has increased, but research on the development of probiotics for use in abalone culture is very rare. Therefore, the present study isolated KC16-2 from fermented kimchi soup and investigated the characteristics of the isolate as a candidate probiotic bacterium in abalone. KC16-2 was identified as Bacillus amyloliquefaciens (B. amyloliquefaciens KC16-2) based on its biochemical properties and 16S rRNA gene sequence. B. amyloliquefaciens KC16-2 showed inhibitory effects against the growth of various vibrios in vitro, and kept the numbers constant until four days after inoculation in marine water at a temperature of $15{\sim}25^{\circ}C$, indicating the possible use of KC16-2 as a probiotic, except in the winter. The growth of KC16-2 was inhibited by bile salt, but the numbers increased over time suggesting the bacteria were still alive in the abalone's digestive tract. Abalone fed with a diet including KC16-2 for 12 weeks showed good growth, but showed no significant differences from the control group. However, the mortality of the abalone supplied the probiotic diet was reduced to half that of the control group in a challenge test with Vibrio tubiashii. Therefore, we suggest that B. amyloliquefaciens KC16-2 could be used as a probiotic bacterium for control of the mortality of abalone caused by opportunistic pathogenic vibrios.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.263-269
• /
• 2019

In this study, the characteristics and operation of a multi-purpose loader equipped with various sensors such as a sensor capable of measuring the boom length, an angle sensor capable of measuring the tilt of the left and right sides of the boom and the loader, and a load cell capable of measuring the weight during lifting We have implemented a system that displays related data values. The configuration of the system reads the values from the sensors, sends them to the vehicle controller, and transmits the calculated results of the overturn rate and other important information to the display device using the CANOpen protocol. Also, in the calculation of the overturn ratio, the structure of the multi-purpose loader is similar to that of the crane belonging to the heavy equipment, and the crane overturn rate calculation method is used. Through this study, we can observe the condition of the heavy equipment and recognize the emergency situations such as abalone through the display device.