• The Korean Journal of Malacology
• /
• v.30 no.3
• /
• pp.227-234
• /
• 2014

The effect of different feeding rate on the growth and survival rate of the abalone, Haliotis discus hannai, were investigated in marine net cage culture and indoor tank culture. Feeding rate is determined that was fed 5, 10, 15 and 20 percentage to abalone at body weight once daily : 5 daily feeding rate (DFR), 10DFR, 15DFR and 20DFR. After that, it was conducted to reared during thirteen month with two replicates in net-cage culture and indoor tank culture. In the growth performance of reared abalone (initial mean shell length $54.18{\pm}7.39mm$) in net cage culture, that the absolute growth rate (ARG), daily growth rate (DGR) and specific growth rate (SGR) to the shell length and shell breadth, as well as weight gain (WG), daily weight gain (DWG) and specific weight gain (SWG) to body weight of 20DFR were lower than those of different groups (P < 0.05). Also, survival rates of 20DFR was lower than those of different groups (P < 0.05). In the growth performance of reared abalone (initial mean shell length $49.70{\pm}2.28mm$) in indoor tank culture, that the ARG, DGR and SGR to the shell length and shell breadth, as well as WG, DWG and SWG to body weight of 5DFR and 10DFR were lower than those of different groups (P < 0.05). And also, survival rates of 20DFR was lower than those of different groups (P < 0.05). Therefore, these results is showed that the daily feeding rate for natural feed in net-cage culture and indoor tank culture should be to supply among 5-10 percents, taking into account growth, survival rate and economical efficiency.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.282-288
• /
• 2002

This study was carried out to investigate the optimum tagging method of the abalone juvenile, Haliotis discus hannai in indoor culture system from May 2000 to January2001. Tagging methods were shell drilling, copper-wire tagging at the respiratory pore and nut gluing on the shell. The attachment rates of the shell showed high in the 2- and 3 cm bolt-nut tagged groups, about over $89.5\%$, whereas shell drilling groups on the shell were about $18.5\%$. The internal coating rates tagged with bolt-nut were over $96.6\%$, while those tagged with copper wire were less than $17.1\%$. Growths in the all marked and tagged experimental groups comparing with control groups were not significantly different (p>0,05). Survivals in all tagging groups except shell drilling and nut gluing groups in the 5 cm abalone were over $95\%, Accordingly, all juvenile groups were not affected by the tagging methods in terms of the growth and survival on the abalones. Based on these results, the micro bolt-nut tagging was the most effective method in abalone.

• The Korean Journal of Malacology
• /
• v.29 no.2
• /
• pp.91-96
• /
• 2013

Although the method of seedling production of Haliotis discus hannai is well known, the optimum benthic diatom species as a live food at early larval stage are not fully developed. In this study three Pennales diatom species, Caloneis schroederi, Rhaphoneis sp., and Cocconeis californica were examined on settlement, metamorphosis, survival, and growth of Haliotis discus hannai larvae. The larvae fed Raphoneis sp. or C. californica showed high settlement rate with 80-82% within 48 hrs, which was significantly higher than those fed C. schroederi or mixed diets with three diatom species. The larvae fed the former microalgal species also showed higher metamorphosis rate with 32-34% than the latter species with 10-12% within 4 days. With regard to survival and growth of the larvae, single diet with Rhaphoneis sp. or C. californica had better dietary value than the mixed diets for the early larvae of H. discus hannai.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.3
• /
• pp.185-193
• /
• 1976

The sterol compositions of the Pelecypoda, M. sultataria, S. sachalinensis, and the Gastropoda, H. discus hannai Inc, T. cornutus were investigated. The results areas follows: 1. The contents of the unsaponifiables and sterols of the Pelecypoda, M. sulcataria, S. sathalinensis, and the Gastropoda, H. discus hannai Ino, T. cornutus, are $12.0\%,\;11.8\%,\;and\;16.2\%,\;15.3\%$, respectively. 2. The complex sterols from the Pelecypoda and Gastropoda are well separated on Silica Gel HF 254 TLC impregnated with $15\%$ silver nitrate. 3. The prominent sterols of the Pelecypoda, M. sulcateria and S. sachalinensis, are 22-trans-24-norcholesta-5, $22-dien-3\beta-ol$ $3.0\%\;3.9\%$ 22-dehydrocholesterol $6.7\%,\;10.2\%$, cholesterol $39.0\%,\;48.6\%$ brassicasterol $14.1\%,\;13.8\%$ 24-methylenecholesterol $19.4\%,\;11.5\%$, stigmasterol $2.4\%,\;0\%$ $\beta-sitosterol\;10.5\%,\;11.9\%$, and fucosterol $4.3\%,\;0\%$. 4. Abalone, H. discus hannai Ino, and T. cornutus contain cholesterol $98.0\%,=97.5\% as main component with small amounts of 22-dehydrocholesterol, brassicasterol and desmosterol. In H. discus hannai rno, 24-methylenecholesterot and fucosterol are also found.

• The Korean Journal of Malacology
• /
• v.30 no.3
• /
• pp.235-242
• /
• 2014

This study was conduct to investigate the effect of Intermediate culture types on the growth and survival rate of the abalone, Haliotis discus hannai, in net cage and indoor tank. Intermediate cultures were to determine there that was to setting at marine net cage culture (NCC) in net cage, floor culture (FC), net floor culture (NFC), double shelter culture (DSC) and indoor net cage culture (INCC) in indoor tank, in two replicate. In the growth performance of juvenile abalone reared through intermediate culture, that the absolute growth rate ($AGR_{SL}$, $AGR_{SB}$), daily growth rate ($DGR_{SL}$, $DGR_{SB}$), and specific growth rate ($SGR_{SL}$, $SGR_{SB}$) to the shell length $(_{SL})$ and shell breadth $(_{SB})$ of NCC were higher than those of different groups (P < 0.05). As weight gain (WG), daily weight gain (DWG) and specific weight gain (SWG) to body weight through intermediate culture types in indoor tank was not significant. Also that, survival rate among experimental groups of intermediate culture in indoor tank was not significant. Therefore, these results is showed that should to cultivate for net cage so that intermediate culture of juvenile abalone over 2 cm, accordingly research to effective progress of juvenile abalone intermediate culture in indoor tank be should from various reason as well as feed and rearing condition.

• The Korean Journal of Malacology
• /
• v.31 no.2
• /
• pp.83-92
• /
• 2015

The effect of different intermediated rearing method by expanding the attached floor space in order to highly density culture on the growth characteristics and survival rate of the juvenile abalone, Haliotis discus hannai, were investigated in land-based tanks. The intermediated culture methods was determined thru the shelter counts and layer for 10 month with two replicates : the single layer shelter (SLS), the double layer shelter (DLS), the triple layer shelter (TLS) and the single layer shelter under net cage (SLSNC). In addition, the culture on shallow race way tank had to set up as culture of the ditch raceway tank (CDRT) and the floor race way tank (CFRT). In the growth performance of reared abalone (initial mean shell length $54.18{\pm}7.39mm$ and weight $1.93{\pm}0.14g$) at experimental tanks, that the absolute growth rate (ARG), daily growth rate (DGR) and specific growth rate (SGR) to the shell length and shell breadth was not significant at each experimental tanks except SLSNC. As well as too, weight gain (WG), daily weight gain (DWG) and specific weight gain (SWG) to weight was not significant at each experimental tanks except SLSNC, too. Survival rates of CDRT and CFRT was lower than those of different experimental tanks (P < 0.05). Therefore, these results is showed that high density different intermediated rearing method by expanding the attached floor space for juvenile H. discus hannai was not have difference as growth performance and survival rate both one layer shelter and multi layer shelter. Also, it is considered that shallow race way tank was not useful rearing for the juvenile intermediate culture of H. discus hannai in land based.

• The Korean Journal of Malacology
• /
• v.29 no.4
• /
• pp.325-334
• /
• 2013

The purpose of this paper is to compare and analyze family variations for growth-related traits of Pacific abalone, Haliotis discus hannai. Genetic parameters and breeding values were estimated using all measurement data like shell length, shell width, and total weight as 18-month-old growth traits of 5,334 individuals of selected third generation's Pacific abalone produced in 2011. Family variations of 865 individuals of the upper 10 families with the largest number were inspected. Overall mean in phenotypic traits of 18-month-old Pacific abalone which was investigated in this study showed 54.5 mm of shell length, 36.8 mm of shell width and 21.3 g of total weight respectively. And, variation coefficient of total weight was 51.0%, so variability of data was shown to be higher than 21.1% of shell length and 20.7% of shell width. The family effects showed significant difference by each family (p < 0.05), and heritability of shell length, shell width, and total weight was medium with 0.370, 0.382, and 0.367 respectively. So it is considered that family selection is more advantageous than individual selection. On the basis of breeding values of estimated shell length and total weight, to investigate distribution and ranking by each individual about the upper 10 families with the largest number of individuals, the values were used by being changed into standardized breeding values. Based on shell length, it was investigated that the individual number of the upper 5.4% is 152 and the number of the lower 5.4% is 8. In case of total weight, it was inspected that the individual number of the upper 5.4% is 164 and the number of the lower 5.4% is 1. Like these, phenotypic and genetic diverse variations between families could be checked. By estimating genetic parameters and breeding values of a population for production of the next generation, if they are used properly in selection and mating, it is considered that more breeding effects can be expected.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.543-554
• /
• 1995

This paper describes the improvement of driving stability and the control system for INMEL-VII which is motorized manual wheelchair to satisfy requirements of the disabled The INMEL-VI was based on high maneuverability of the omnidirection drive and safety But the results of field tests about two years showed some problems to the disabled in daily life such as driving stability, Pm switching noise, and rotation of motor without driving command on negative slope. To solve the problems due to an increased DC motor power and applied to direct connection method in INMEL- VII. It improved the driving circuits and set switching frequency to 5KHz to eliminate the switching noise caused by PWM control of DC motor, As compare with the INMEL-VI, INMEL-VII is improved in driving stability by transfer the weight center to forward. The results of field testing proved the improvement of the driving stability and software algorithm It has been estimated to have a hlgh practical use for powered walking aids to the disabled's daily life.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4142-4148
• /
• 2013

Because of effective fruit growing and management in the slope land, the use of orchard vehicle with lifting utilities has been increased. For this reason the study on the stability of that vehicle for worker's safety is needed. This study is investigated on the stability estimation of orchard vehicle with four wheels and dual rectangular-type lifting utilities which can be moved on the dirt sloping load. Through the multi-body dynamics analysis on the vehicle mechanism, overturning angles of 19.2 and $34.6^{\circ}$ in the right-left and front-rear direction can be calculated. It is determined tractive resistances and required powers of the wheels. And through the finite element analysis on the frame of lifting utility its maximum von-Mises stress is 146 MPa and it is structural stable. Therefore it is known that the orchard vehicle with wheels and lifting utilities has static and dynamic stability.

• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.95-102
• /
• 2016

This study investigated the growth characteristics of juvenile abalone when has been rearing as other different feed rates by the commercial abalone formulated feed on indoor tank, during the winter period that was maintaining on the low water temperature. Experimental abalones were use to 1 year old (shell length $29.14{\pm}2.56mm$, wet weight $2.9{\pm}0.6g$), and it has cultured at six feeding rate groups (0.75 DFW, 1.50 DFW, 2.25 DFW, 3.00 DFW, 3.75 DFW, 4.5 DFW) that were set up the daily feeding rate about total weight (DFW), and two replicated. The average water temperature in the experiment period was $9.7{\pm}3.27^{\circ}C$. In the monthly change absolute growth rate (AGRSL) and specific growth (SGRSL) of shell length, at January, 3.00 DFW was significantly higher than all feeding rate groups (P < 0.05). And in the monthly change of weight change and weight gain (WG), at March, 3.75DFW was significantly higher than all feeing rate groups (P < 0.05). The growth coefficient of thermal units (TGC) was decreased rapid since January, and 3.75 DFW was show significantly higher than all feeding rate groups (P < 0.05). In monthly change of feed efficiency (FE), at December, the 0.75 DFW was significantly higher than all feeding rate groups (P < 0.05), and in February and March, there was no significant difference between all feeding period. Therefore, In this study, was show that juvenile abalones can do to maintain or increasing from weight to supply commercial artificial diet during winter period when rearing into the indoor tank.