• Journal of the Korean Chemical Society
• /
• v.51 no.1
• /
• pp.31-35
• /
• 2007

The tripodal copper(II) complex [Cu(pmea)(H2O)](ClO4)2·H2O (1) (pmea = bis[(2-pyridyl)methyl]-2-(2-pyridyl)ethylamine) has been synthesized and structurally characterized by X-ray diffraction method. It crystallizes in the triclinic system P-1 with a = 9.9362(9), b = 15.7299(17), c = 18.0562(11) A, α = 68.760(8), β = 76.331(6), γ = 77.092(9)°, V = 2526.2(4) A3, Z = 2. Each copper atom reveals a distorted square pyramidal with three nitrogen atoms of the pmea ligand and water molecule occupying the basal plane and one nitrogen atom from the pyridine ring according the axial position. The cyclic voltammogram of 1 undergoes reversible one-electron oxidation to the CuIII and reversible one-electron reduction to the CuI.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.35-43
• /
• 1998

Electrodes using for the anode electrode of direct methanol fuel cell with Pt/C and Pt/Ru/C catalyst were prepared and characterized by SEM, TEM, thermal analysis and electrochemical analysis. The half cell tests were carried out with 1 M $H_2SO_4$ electrolyte and 1 M $CH_3OH$ in order to evaluate the electrode performance. The employed electrochemical methods were cyclic vol-tammetry and potentiodynamic polarization experiments. It was found that 20 w% polytetrafluoroethylene (PTFE) content in catalyst showed the best performance due to the best platinum utilization on PTFE-containing catalyst layer. It was found that Pt/Ru/C binary catalyst inhibited the poisoning of anode electrode showing improved performance compared to the Pt/C catalyst by the adsorption of oxygen containing species on the electrode surface at same time. The apparent activation energy for methanol oxidation on the Pt/Ru/C and Pt/C catalyst layer was 11.60 kJ/mol and 26.85 kJ/mol, respectively.

• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.53-57
• /
• 1992

We report the crystal growth and the electro-optic characteristics of $CdS_{1-x}Se_{x}$ thin films. $CdS_{1-x}Se_{x}$ thin films wire deposited on the alumina plate by electron beam evaporation technique in pressure of $1.5{\times}10^{-7}$ torr, voltage of 4kV, current of 2.5mA and substrate temperature of $300^{\circ}C$. The deposited $CdS_{1-x}Se_{x}$ thin films were proved to be a polycrystal with hexagonal structure through X-ray diffraction patterns. $CdS_{1-x}Se_{x}$ photoconductive films showed high photoconductivity after annealing at $550^{\circ}C$ for 30 minutes. And the films have been investigated the Hall effect, photocurrent spectra, sensitivity, maximum allowable power dissipation and response time.

• Journal of the Korean Society of Radiology
• /
• v.9 no.7
• /
• pp.439-443
• /
• 2015

An electrical signals of a conventional radiation medical imaging sensor are obtained by charge integration method. In this study, the polycrystalline cadmium telluride(p-CdTe) film was fabricated by a thermal evaporation method for the photon counting sensor development with excellent resolution in low exposure dose. From the fabricated p-CdTe sensor, the physical properties(SEM, XRD) and the electrical properties(leakage current, x-ray sensitivity, SNR) were evaluated. As a result, the leakage current of below $5nA/cm^2$ and $7{\mu}C/cm^2-R$ of the X-ray sensitivity were showed in below $1V/{\mu}m$. In addition, the signal to noise ratio showed the values of above 5000 at operating voltage.

• Composites Research
• /
• v.24 no.5
• /
• pp.17-22
• /
• 2011

Recently transparent electrodes using carbon nanotube (CNT) have been studied actively to replace conventional ITO. In this work, CNT or ITO coated poly(ethylene terephthalate) (PET) were prepared by controlling the surfaces since the cohesion degree depends upon drying conditions. As transparent electrode application, 3 drying temperatures were set as 20, 80, and $120^{\circ}C$ to produce the change of surface properties. Interfacial durability and electrical properties of prepared transparent electrodes were evaluated by electrical resistance measurement. Surface change with changing drying temperature was observed by FE-SEM, whereas the transparency change was measured by UV-spectroscopy. The electronic properties of nanoparticle coated surface were evaluated using cyclic voltametry method upon the surface change with controlled drying temperature. Durability of CNT coated surfaces was better than ITO coated ease. As drying temperature increased, better coated surface was prepared due to improved cohesion among nanoparticles, which resulted in increased electrical properties.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.72-78
• /
• 2009

For the electro-discharge machining of an electro-conductive anisotropic composite, an unsteady state formulation was established and solved by Galerkin's finite element method. The distribution of temperature on work piece, the shape of the crater and the material removal rate were obtained in terms of the process parameters. The $12{\times}12$ irregular mesh that was chosen as the optimum in the previous analysis was used for computational accuracy and efficiency. A material having the physical properties of alumina/titanium carbide composite was selected and an electricity with power of 51.4 V and current of 7 A was applied, assuming the removal efficiency of 10 % and the thermal anisotropic factors of 2 and 3. As the spark was initiated the workpiece immediately started to melt and the heat affected zone was formed. The moving boundary of the crater was also identified with time. When the radial and axial conductivities were increased separately, the temperature distribution and the shape of the crater were shifted in the radial and axial directions, respectively. The material removal rate was found to be higher when the conductivity was increased in the radial direction rather than in the axial direction.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.345-354
• /
• 1996

Algal(II) Multidentate N, O-Schiff base ligands, such as bis(salicylaldehyde) ethylenediimine(SED), bis(salicylaldehyde) propylenediimine(SPD), bis(salicylaldehyde) diethylenetriimine(SDT), bis (salicylaldehyde) triethylenetetraimine(STT) and bis(salicyl-aldehyde)tetraethylenepentaimine(STP) were prepared. Stepwise proton dissociation constants of the Schiff base were measured potentiometrically in ethanol and a mixture of 70% dioxane and 30% $H_2O$. The stability constants of copper(II)-Schiff base complexes were in the order of Cu(II)-SPD${\leq}$Cu(II)-SED~STT${\leq}$Cu(II)-STP. Oxidation-reduction process of the Cu(II)-Schiff base complexes was involved with one-electron reaction.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.101.1-101.1
• /
• 2012

이번 연구에서는 전기 방사 방법을 이용하여 합성된 산화아연 나노 섬유의 일산화질소 가스에 대한 반응 특성을 조사하였다. 이 산화아연 나노 섬유는 증류수에 용해시킨 아연 아세테이트(zinc acetate)와 폴리 비닐 알콜(poly vinyl alchol, PVA)로 만들어진 용액이 전기 방사되어지며 만들어지게 된다. 무엇보다도 나노 섬유의 직경은 용액의 점도에 의해 결정되었다. 따라서 산화아연 나노 섬유의 고른 두께를 형성하기 위하여 PVA의 양을 조절하여 적절한 용액의 농도를 찾게 되었다. 이후 진행된 열처리 공정을 통해서 우리는 직경이 30~100나노미터 가량의 나노 섬유를 얻을 수 있었으며 무작위로 배열된 통기성 네크워크 구조를 얻게 되었다. 표면 분석을 위하여 주사현미경을 이용하였는데, 산화아연 나노 섬유의 표면은 열처리 전과 후로 나누어 관찰되었으며 열처리 전보다 열처리 후의 표면이 좀 더 거친 것으로 확인되었다. 이는 열처리 공정을 거치면서 효과적으로 유기물들의 제거가 이루어진 것을 짐작할 수 있었다. 일산화질소 가스에 대한 특성 평가를 위해 자체 제작된 전류-전압 측정 장치(I-V measurement)가 사용되었다. 다양한 작동온도와 다양한 일산화질소 가스 농도의 변화를 주며 얻어진 응답도를 통해서, 전기 방사를 통해 만들어진 산화아연 나노 섬유 구조 기반의 가스 센서는 두드러질만큼 좋은 응답도를 가졌고 작동 온도 $200^{\circ}C$에서 일산화질소 가스에 대한 최대 민감도를 보임을 분명히 확인할 수 있었다. 특히, 산화아연 나노 섬유 구조 기반의 가스 센서는 ppm이하의 낮은 일산화질소 가스 또한 감지할 수 있음을 확인하였다. 이러한 결과들은 전기 방사를 통해 만들어진 산화아연 나노 섬유기반의 가스 센서는 저비용, 고감도의 장점을 갖는 일산화질소 가스 센서가 될 것임을 알 수 있었다.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.592-597
• /
• 2014

The graphite/$SiO_2$ composites as anode materials for lithium-ion batteries were prepared by sol-gel method to improve the graphite's electrochemical characteristics. The prepared graphite/$SiO_2$ composites were analysed by XRD, FE-SEM and EDX. The graphite surface modified by silicon dioxide showed several advantages to stabilize SEI layer. The electrochemical characteristics were investigated for lithium ion battery using graphite/$SiO_2$ as the working electrode and Li metal as the counter electrode. Electrochemical behaviors using organic electrolytes ($LiPF_6$, EC/DMC) were characterized by charge/discharge, cycle, cyclic voltammetry and impedance tests. The lithium ion battery using graphite/$SiO_2$ electrodes had better capacity than that of using graphite electrodes and was able to deliver a discharge capacity with 475 mAh/g at a rate of 0.1 C. Also, the capacity retention ratio of the modified graphite reaches 99% at a rate of 0.8 C.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.3
• /
• pp.186-192
• /
• 2010

In situ electrochemical atomic force microscopy (ECAFM) observations of the surface of highly oriented pyrolytic graphite (HOPG) was performed before and after cyclic voltammetry in lithium bis(fluorosulfonyl)imide (LiTFSI) dissolved in 1-buthyl-2,3-dimethylimidazolium (BDMI)-TFSI to understand the interfacial reactions between graphite and BDMI-based ionic liquids. The formation of blisters and the exfoliation of graphene layers by the intercalation of $BDMI^+$ cations within HOPG were observed instead of reversible lithium intercalation and de-intercalation. On the other hand, lithium ions are reversibly intercalated into the HOPG and de-intercalatied from the HOPG without intercalation of the $BDMI^+$ cations in the presence of 15 wt% of 4.90 mol/$kg^{-1}$ LiTFSI dissolved in propylene carbonate (PC). ECAFM results revealed that the concentrated PC-based solution is a very effective additive for preventing $BDMI^+$ intercalation through the formation of solid electrolyte interface (SEI).