• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.47-52
• /
• 2017

PSC (Prestressed Concrete) structures have been used widely for its engineering advantage with using total concrete area as effective compressive section. However tendon inside is exposed to such a high tensile stress that and more attentions should be paid for corrosion control. This work is for changing corrosion current and ultimate strength in tendon with increasing prestressing force in a constant corrosive condition. With increasing prestressing force, corrosion current, corrosion amount, and ultimate load are changed linearly. When prestressing force increases from 20.0 % to 40.0 %, corrosion current increases to 124.4 % and 168.0 % and ultimate load decreases to 87.8 % and 78.4 %, respectively. With inducing constant electrical potential, increasing corrosion current and reduction of strength are evaluated to be linearly related with increasing prestressing load.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.39-44
• /
• 2011

This purpose of this study is to propose the characteristics analysis of the PCB pattern designed two modes for the output voltage value on the PMIC through converting the limited voltage value inputted from a battery. The PCB design technology has been undergoing difficulty in getting the related technology in a domestic market because of increasing EMI/EMC, Cross-talk, Impedance. And it requires to have the appropriate clearance between the patterns and the technology of PCB pattern width with a amperage according to various uses. The study carried out the characteristics analysis of the PCB pattern designed from a direct output method without a capacitor[mode1], to an output method through a capacitor[mode2] for PMIC output voltage value. Besides, we calculated the pattern width with a amperage using the equation suggested by IPC-2221, presenting the right way of the layout design to analyze the trouble with the test. Therefore, this study is expected to contribute not only to applying the PMIC design for the mobile panel power supply, but also helping the design and application technology in various areas such as car control, camera, note-book, computer, PDA, etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.861-869
• /
• 2020

A dynamo set for a high-power induction motor drive is expensive and needs a long time to manufacture. Therefore, the development of a simulator that functions as the induction motor and load equipment is required. A load simulator of an inverter for a high-power three-phase induction motor consists of a reactor and three-phase PWM inverter. Therefore, it cannot simulate the dynamic characteristics of an induction motor and functions only as a load. In this paper, a real-time simulator is proposed to simulate a model of an induction motor and the load characteristics based on an LCL filter and three-phase PWM rectifier for a three-phase induction motor. The currents of a PWM inverter that simulate the stator currents of the motor are controlled by the inductor currents and capacitor voltages of the LCL filter. The capacitor voltages of the LCL filter simulate the induced voltages in the stator windings by the rotating rotor fluxes of the motor, and the capacitor voltages are controlled by the inductor currents and a PWM rectifier. The rotor currents, the stator and rotor flux linkages, the electromagnetic torque, the slip frequency, and the rotor speed are derived from the inverter currents and the motor parameters. The electrical and mechanical model characteristics and the operation of vector control were verified by MATLAB/Simulink simulation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.441-442
• /
• 2007

제주계통은 지속적인 부하증가를 고려하여 대용량의 발전기를 설치하였다. 제주계통에서 대용량의 발전기가 탈락하는 경우 탈락되는 유효전력량 만큼 HVDC에서 추가적으로 전송하게 된다. 전류형 HVDC는 유효전력을 전송시키기 위해서 계통에서 무효전력을 공급받아야 한다. 탈락하는 발전기의 유효전력 발전량이 많으면 많을수록 계통에서 공급받아야 하는 무효전력량이 많아진다. 실질적으로 상정고장 검토시 제주도의 대용량 발전기의 탈락은 제주 계통의 안정도 유지에 심각한 문제를 초래하므로 발전기의 유효전력 출력은 신뢰도 유지를 위해서 제한이 필요하다. 본 논문에서는 제한된 발전기 최대 유효전력 출력값을 계산하기 위한 새로운 해석 방법과 전력시장운영규칙의 기준전압을 벗어나지 않는 범위 내에서 기존에 설치되어 있는 전압보상장치를 투입함으로써 상대적으로 값이 싼 대용량 발전기의 발전량을 향상시키는 방안에 대해서 논의한다.

• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.337-346
• /
• 2008

Objective: The purpose of this study was to determine whether an exogenous electric current to the alveolar bone surrounding a tooth being orthodontically treated can enhance tooth movement in human and to verify the effect of electric currents on tooth movement in a clinical aspect. Methods: This study was performed on 7 female orthodontic patients. The electric appliance was set in the maxilla to provide a direct electric current of $20{\mu}A$. The maxillary canine on one side was assigned as the experimental side, and the other as control. The experimental canine was provided with orthodontic force and electric current. The control side was given orthodontic force only. Electrical current was applied to experimental canines for 5 hours a day. The amount of canine movement was measured with an electronic caliper every week. Results: The amount of orthodontic tooth movement in the experimental side during 4 weeks was greater by 30% compared to that of the control side. The amount of increase in tooth movement in the experimental side was statistically significant. The amount of tooth movement in the experimental side during the first two weeks was !Bleater than that in the following two weeks. The amount of weekly tooth movement in the control side was decreased gradually. Conclusions: These results suggested that the exogenous electric current from the miniature electric device might accelerate orthodontic tooth movement by one third and have the potential to reduce orthodontic treatment duration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.1
• /
• pp.34-40
• /
• 1991

The study aimed to investigate the relationship between the rates of leaf senescence and photosynthate translocation at post-anthesis. Seven barley varieties were observed at Suweon in 1988-89. The varieties differed significantly in the number of leaves survived and the rate of photosynthate transolcation with the progress of grain filling. The rate of grain filling was higher in the fast leaf sene-scencing varieties than the slow senescencing ones. There was a close coincidence between the rates of grain filling and $\^$14/c translocation into grains. Photosynthesis was higher in the fast leaf senescencing varieties at early stage of grain filling, but the reverse phenomenon was observed at the late stage of grain filling. The grain yield of fast senescencing varieties was higher than that of slow ones.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2696-2698
• /
• 2004

Iontophoresis를 이용한 경피전달용 약물 패치를 제작하기 위해 고분자의 종류, 전류크기, 시간에 따른 약물방출 결과를 발표한다. 고분자 Hydroxy Propyl Methyl Cellulose(HPMC), Hydroxy Propyl Cellulose(HPC), Hydroxy Ethyl Cellulose(HEC)에 각각 국소마취제-Lidocaine을 넣어 시료를 제작하였다. 약물 방출은 Drug Delivery Cell(DDC)위에 Ag/AgCl 전극 (anode), Pt wire 전극(cathode)을 각각 설치하여 전압인가에 따른 이온 유동으로부터 시간에 따른 전압/전류변화 및 약물농도를 고찰하였다. 전압 15V 인가 시 고분자 막과 전해질 사이에 흐르는 전류 1.0mA는 15분간 유지되지만, Ag/AgCl 전극의 산화작용으로 인해 전류는 서서히 감소하며 26분 후 거의 흐르지 않았다. 따라서 안정적인 전류로 유지되는 시간을 15분으로 최적화하였다. 고분자 중 HPMC 막을 사용하여 약물방출 실험을 한 경우 UV 분석결과 파장 262.26nm에서 최대 흡광도 0.238이었고, 가장 높은 약물농도가 나타났다. 이러한 HPMC의 약물방출 실험결과 비교적 높은 전류 1.0mA일 때 약물 방출량이 많았고, 동일한 전류 0.4mA를 장시간 흐르게 하였을 경우, 농도가 축적되므로 치료 가능한 안정적인 특성임을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.25-35
• /
• 2000

A simple two-terminal cyclic current0voltage(I-V) technique was used to measure the current-transients in metal-oxide-semiconductor capacitors. Distinct charging/discharging currents were measured and analyzed as a function of the hold time, the delay time, the gate polarity during the FNT electron injection, the injection fluence and the annealing time after the injection had stopped. The charge-exchange current was distinguished from total current-transients containing the displacement current components. Charging/discharging current caused by the charge exchange was strongly dependent not only on the density of positive charges in the $SiO_2$, but also on the density of interface traps generated during the FNT electron injection. Several tentative mechanisms were suggested.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.14-15
• /
• 2011

본 논문에서는 단상입력을 가지고, 직류단에 소형 캐패시터를 사용하는 인버터를 사용해 3상 전동기 가변속 구동을 한다. 이때 주기적으로 크게 맥동하는 직류단 전압 조건에서 어떻게 전동기를 제어하는가에 대해 언급한다. 평균 전압 제한원을 전류 영역에 표현하고, 새로운 약자속 영역을 정의한다. 이를 바탕으로 전류 지령을 생성하는 제어기를 구성하여 전동기를 제어할 수 있는 기법을 제안하고 이를 실험을 통해 검증한다. 이를 통해 입력 전류의 고조파를 줄여 역율도 개선할 수 있다.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.65-66
• /
• 2011

독립부하가 존재하는 계통연계 인버터에서 LCL필터 설계시 계통으로 주입하는 전류뿐만 아니라 독립부하 전압품질도 고려되어야 한다. 또한, LCL필터의 가격과 부피측면을 고려하여 고조파 감쇠율은 기준을 만족하면서 인덕턴스와 캐패시턴스는 가능한 작게 설계하는 것이 중요하다. 본 논문에서는 계통전류의 고조파 기준은 만족하고, LCL필터 모델로부터 구해지는 전달함수를 이용하여 계통연계시와 독립운전시 모두 독립부하의 전압품질이 만족하도록 필터설계를 한다. 또한, 독립부하 전압리플, 인덕터 부피, 무효전류량, 시스템 대역폭에 가중치를 적용한 LCL필터 최적설계 방법을 제안한다.