• Proceedings of the Korean Society of Computer Information Conference
• /
• 2009.01a
• /
• pp.9-12
• /
• 2009

최근 무인 로봇 및 산업 자동화의 비약적인 발전으로 용접 분야에서도 무인화 및 자동화 시스템 구축이 활성화 되고 있다. 본 논문에서는 아크 용접 시스템의 주요한 용접 인자인 용접전류, 용접전압 정보를 PSoC 기반의 WirelessUSB를 이용하여 무선으로 모니터링 시스템에 전송하고 이를 신경회로망에 적용하여 용접 현상을 모니터링 하였다. 또한 산업 현장에도 일반화된 TCP/IP 통신을 이용하여 원격으로 관리가 가능하도록 구현하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.303-306
• /
• 2005

This paper presents the frequency-dependent characteristics of leakage currents flowing through ZnO surge arrester block. The leakage current-voltage (I-V) characteristic curves of the commercial ZnO surge arrester blocks were measured. The resistive leakage current was found to increase with increasing frequency in the low conduction region. The capacitance of ZnO block was independent of the magnitude and frequency of the applied voltage. The power losses of ZnO block increase as the frequency of applied voltage increases, because of the dielectric loss related to the frequency of the test voltage.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.151-152
• /
• 2008

본 논문에서는 전극간의 비틀림 각도가 아크거동에 미치는 영향을 알아보기 위해 고속카메라를 이용한 아크촬영과 아크전압측정을 동반한 전류차단시험을 실시하였다. 측정결과를 이용한 아크거동 분석결과를 각 모델에 대한 유한요소해석을 통한 로렌츠 힘 계산결과와 결부시켜 비틀림 각도가 아크거동에 미치는 영향을 분석하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.12-12
• /
• 2001

PLZT(10/30/70), PLT(10) 및 PZT(30/70) 와 같은 강유전체 박막의 이력곡선을 field-dependent polarization 모델을 이용하여 시뮬레이션하고, 측정한 실험적 결과와 비교, 분석하였다. PZT(30/70) 박막의 경우, 5V 이상의 인가전압에서 분극의 포화현상이 둔감하게 나타나고 시뮬레이션 값과의 차이도 심해 강유전체 분극이 순수한 dipole 외에도 다양한 전하의 영향을 받아 형성된다는 사실을 알 수 있다. 또, quasi-MFISFET 소자의 드레인 전류는 field-dependent polarization 모델의 강유전체 이력곡선에서 얻은 파라미터를 square-law FET 모델에 적용시켜 효과적으로 추출하였고, 모델링 결과는 실험값과 유사하였다. 그리고, quasi-MFISFET 소자의 gate 에 -10V의 ′write′ 전압을 인가한 상태에서 PZT(30/70) 박막을 사용한 경우, PLZT(10/30/70), PLT(10) 박막 보다 빨리 채널이 형성되었는데, 그 원인은 강유전체 박막에 따른 retention 특성에서 PZT(30/70) 박막의 분극 감소가 PLZT(10/30/70), PLT(10) 박막의 분극 감소 보다 약 3∼4 배 이상 크다는 점에서 찾을 수 있다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.334-340
• /
• 2005

A disk-type 3-DOF actuator which has new principle and very simple structure is proposed. Also it utilizes the relation of bias and control fluxes produced by permanent magnets and coils, respectively, like other conventional electromagnetic actuators, but its main feature is that both the coils and permanent magnets are fixed in the stator, which makes it easy to design the shape of moving part. Operating principle is that a moving disk is driven by reaction force of Lorentz force acting on the fixed equivalent coil. Simple analytic approach and FEM analysis are performed to determine the design parameters so as to increase the driving force and distance. And some experimental results show the feasibility of the proposed actuator.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.161-164
• /
• 2001

정상상태에서 소자 내부의 격자온도 분포를 해석할 수 있는 시뮬레이터를 제작하였다. Slotboom 변수를 사용하여 열흐름 방정식을 이산화하였다. 또한 격자온도 분포를 고려한 초기 해의 설정 방법을 제안하였다. 제안된 방법의 타당성을 검증하기 위하여 N/sup ＋ P 정합 다이오드에 대해 모의실험을 수행하여 MEDICI의 결과와 비교하였다 순방향 전압-전류 특성은 MEDICI의 결과와 비교하여 7% 이내의 최대 상대오차를 보였고 전위 분포와 온도 분포는 각각 2%, 2% 이내의 최대 상대오차를 보였다. BANDIS에서는 수렴을 위해 평균 3.7회 이하의 행렬 연산이 필요하였으며, MEDICI에서는 평균 5.1회 이하의 행렬 연산이 필요하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.361-366
• /
• 2007

In the distribution networks, it is necessary to develop small and light voltage and current sensor for compact and digitalized switchgears. For this purpose, some researches have been continuing till now, CT(current transformer) and VT(voltage transformer) are one of that research. But conventional CT and VT have some problems, that is, have big size and saturation characteristics because of used to iron core. In this paper, CS(current sensor) and VS(voltage sensor), have some merits measuring of current and voltage magnitude as a alternated conventional equipment, were studied. So, this paper shows the process CS and VS design method, equivalent circuit and output result, respectively. As a result of this test, proposed CS and VS have linearity for the output, no saturation.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.205-208
• /
• 2002

The single phase induction motor(SPIM) with two windings, main and auxiliary winding, is widely used due to ruggedness, low maintenance and simplicity of construction. There are several ways of starting single phase induction motor. The most common method is to use centrifugal switch that is connected in series with a capacitor. But the centrifugal switch that is the external starting system has many problems. In this paper, we use triac to overcome defects that happen by centrifugal switch, Also we used inductor that connected with main winding to get a gate trigger voltage signal. Experiments are focused on a capacitor starling single phase induction motor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.609-612
• /
• 2001

Rogowski coil is made having no ferromagnetic material in a core. So the coil cannot be driven into saturation. This result in that Rogowski coils may be calibrated at relatively low currents. and used with confidence at very high currents. However the lowest level of current that can be measured is limited by the sensitivity of the voltage measuring instrument and system noise. Therefore. geometrical effects were investigated in order to measure high sensitivity of low level current and the significant source of error was examined as well. In the results, the source of error was associated with coil designs. i.e. shape and uniformity of coil and a geometrical location of current source inside and outside of the Rogowski coil.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.278-281
• /
• 1988

This paper realizes the multi-output truncated difference circuits using current mode CMOS, and presents the algorithm designing multi - valued logic functions of a given multivalued truth tables. This algorithm divides the discrete valued functions and the interval functions, and transforms them into the truncated difference functions. The transformed functions are realized by current mode CMOS. The technique presented here is applied to MOD4 addition circuit and GF(4) multiplication circuit.