• Title/Summary/Keyword: 전력 지연 프로파일

Search Result 17, Processing Time 0.023 seconds

Delay Spread Measurement and Analysis in 3 GHz and 6 GHz Indoor Environments (3 GHz, 6 GHz 실내 환경의 지연 확산 측정 및 분석)

  • Lee, Seong-Hun;Lee, Hwa-Choon;Cho, Byung-Lok
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.15 no.1
    • /
    • pp.15-20
    • /
    • 2020
  • In this paper, delay diffusion for exhibition hall and conference room was measured and analyzed in the indoor environment of the building. Scenarios for the indoor environment of the two buildings were written. also, the system configuration and measurement methods were conducted under the same conditions. The measurement conditions were set to 3 GHz and 6 GHz of center frequencies and analysis band selected 2 GHz. The measurement system consisted of vector network analyzer, power amplifier, omni-directional transmit and receive antenna, and transmission line. According to the indoor environment scenario of the two buildings, the location of the receiving antenna was divided into three zones based on the location of the transmitting antenna and this was measured at 1 m intervals according to 18 locations. The power delay profiles, RMS delay spread, and K-factor results of two buildings were compared and analyzed.

Aeronautical to Ground Channel Modeling for Common Data Link (공용데이터링크를 위한 공대지 채널 모델링)

  • Park, Hongseok;Shim, Jae-Nam;Kim, Donghyun;Kim, Dong Ku
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.41 no.12
    • /
    • pp.1876-1883
    • /
    • 2016
  • The new channel model for high data rate common data link(CDL) is proposed. The Two-ray channel, which is composed of the reflected signals on the front ground of the receiver, is considered in this paper. This channel arises due to the curvature of the earth when the altitude of the transmitter is tens of kilometers and distance between the transmitter and the receiver is hundreds of kilometers. The Two-ray channel is modeled by estimating the maximum delay profile and the power delay profile, depending on the transmitting and receiving beamforming angle and the radiation pattern of antenna. The power delay profile has a larger effect on the bit error rate(BER) over signal to noise ratio(SNR) than the maximum delay profile, because the distance range is too long in the proposed channel model.

Shallow Water Acoustic Communication Channel Characteristic Analysis Using PN Sequence with 25 kHz Carrier at the Shore of Geojea Island (25 kHz 대역에서 PN 신호열을 이용한 거제 천해역 수중음향통신 채널 특성 분석)

  • Kim, Jae-Gap;Kim, Sea-Moon;Lim, Young-Kon
    • The Journal of the Acoustical Society of Korea
    • /
    • v.26 no.8
    • /
    • pp.381-389
    • /
    • 2007
  • In this paper, the measuring method of underwater acoustic communication channel characteristics in the shallow water using the autocorrelation characteristic of PN sequence and the undorwater communication channel analysis results from the received signal sample data are described. For measuring the underwater acoustic communication channel characteristics, two PN sequences are used as a transmitted data of I-channel and Q-channel of QPSK symbol and QPSK signal is transmitted with symbol rate of 5 kHz and carrier frequency of 25 kHz. In the receiver the received signal, which pass through 675 m and 1492 m, is sampled and then stored. Using the stored sample data, the scattering function, coherent time, delay power profile, spaced-tone autocorrelation function, delay spread, and coherent bandwidth of each propagation distance cases are analyzed. Based on the analysis results, several guidelines are suggested for the design and implementation of underwater transmission system.

The Study on the Performance of DS/CDMA with a Suppressed Pilot Channel in Mobile Satellite Communication System (이동위성 통신 시스템에서 억압 파일롯트 채널을 이용한 DS / CDMA의 성능 분석)

  • Chung, Boo-Young;Choi, Bong-Keun;Kang, Young-Heung;Lee, Jin
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.8 no.2
    • /
    • pp.151-160
    • /
    • 1997
  • In this paper, we have carried out the DS/CDMA with a suppressed pilot channel, which is used in receiving coherently with Rake diversity and in synchronizing the chip timing, in the mobile satellite communication. Also, we have investigated the envelope variation of a shadowed Rician fading simulator, and analyzed the error performences of DS/CDMA in the mobile satellite communication. The results showed that the error performance in the Heavy shadowing environment might be degraded more than in the Rayleigh fading environment since the fading envelopes in the former environment are varied randomly compared with those in the latter environment. And the performence of DS/CDMA system could be improved about 10 dB compared with that of narrowband QPSK system. In conclusion, DS/CDMA with a suppressed pilot channel had the best performance in the case of the suppressed pilot channel to transmission power ratio $\beta$=-8 dB, the number of complex delay profiles $N_{profile}$=32, and using these values, the error performance of DS/CDMA in Light shadowing environment was identical to the ideal QPSK error performance.

  • PDF

Performance Evaluation of Turbo coded Adaptive QAM Systems for High-speed Mobile Multimedia Communications (고속 이동 멀티미디어 통신을 위한 터보 부호 적응 QAM 시스템의 성능 분석)

  • 백흥현;정연호
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.5 no.3
    • /
    • pp.216-222
    • /
    • 2004
  • Frequency selective fading is a limiting factor for transmission rate and performance in high-speed multimedia communications. In this paper, we propose a turbo coded adaptive quadrature amplitude modulation (QAM) system for efficient high-speed transmission. By making use of a user-friendly simulation platform of SPW, the proposed turbo coded adaptive QAM system(TuAQAM) is developed and its performance is evaluated in terms of throughput and BER performance. Two channel models having delay spreads of 700ns and 1400ns are created for the simulations. It is shown that the proposed TuAQAM system provides a performance improvement of approximately 3dB and improved throughput for the channel model whose delay spread is 700ns. Similarly, a performance improvement is also achieved for the channel model whose delay spread is 1400ns.

  • PDF

A Symbol Synchronization Algorithm With an Adaptive Threshold Establishment Method For OFDM Systems (OFDM시스템을 위한 적응 문턱값 설정방식의 심볼동기화 알고리듬)

  • Song, Dong-Ho;Joo, Chang-Bok
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.40 no.6
    • /
    • pp.213-224
    • /
    • 2003
  • The proposed algorithm can always set up the optimal threshold value regardless of channel characteristics using an adaptive threshold establishment method that determines the threshold level according to channel noise power, and then it uses the specially designed training symbols that can make the algorithm's estimation performance be less sensitive to power delay profile variation in a multipath channel. In result, the estimation performance of the proposed technique is less affected by channel characteristic variation.

Measurement and Analysis of Propagation Characteristics in Curved Subway Tunnel Environments (곡선형 지하철 터널환경에서 전파 특성의 측정과 분석)

  • 정회동;박노준;강영진;송문규
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.8A
    • /
    • pp.950-961
    • /
    • 2004
  • In this paper, we measured and analyzed propagation characteristics in a subway tunnel that is recently increasingly becoming one of the radio communication environments. The measurements are carried out in a subway tunnel with frequency bands of 2.45㎓ and 5.8㎓. The length of tunnel we used for this study is 175m of LOS (Line-of-sight) and 270m of NLOS (Non Line-of-Sight). The subway tunnel is curved and its cross section is horseshoe type. The measurement systems we employ in this study are a narrow-band system and a wide-band system. The narrow-band system is used to get path loss measurement and the wide-band system is used to figure out delay profile measurement. In particular, the wide-band system consists of 1023 length PN sequence generator using a chip rate of 80MHz based on a sliding correlation technique. The omni-directional antennas and directional antennas are used to analyze propagation characteristics for beam type of antenna. The path loss displays only pure path loss of a tunnel environment. The delay profile indicates the mean excess delay and RMS (root mean square) delay spread.

Optimal Chip Rate of Power and Rate Adapted DS/CDMA Communication Systems in Nakagami Fading Channels (나카가미 페이딩 채널에서 전력 및 전송률 적응화 직접 대역확산 부호분할 다중접속 통신시스템을 위한 최적 칩률에 관한 연구)

  • Lee, Ye-Hoon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.2A
    • /
    • pp.128-133
    • /
    • 2010
  • We investigate the optimal chip rate of power or rate adapted direct-sequence code division multiple access (DS/CDMA) communication systems in Nakagami fading channels. We find that the optimal chip rate that maximizes the spectral efficiency depends upon both the channel parameters, such as multipath intensity profile (MIP) and line-of-sight (LOS) component, and the adaptation scheme itself. With the rate adaptation, the optimal chip rate is less than $1/T_m$, irrespective of the channel parameters, where $1/T_m$ is multipath delay spread. This indicates that with the rate adaptation, correlation receiver achieves higher spectral efficiency than RAKE receiver. With the power adaptation, however, the optimal chip rate and the corresponding number of tabs in RAKE receiver are sensitive to MIP and LOS component.

Characterization of Wireless Feedback Interference Channels of a Wireless Repeater Using Sounding Measurements (무선 중계시스템의 무선 궤환 간섭 채널 측정 및 특성 분석)

  • Moon, Woo-Sik;Im, Sung-Bin;Kim, Hyun-Chae;Kwon, Nag-Won
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.46 no.1
    • /
    • pp.40-47
    • /
    • 2009
  • This paper presents the method of measuring the feedback interference channel, which is developed between the transmit and receive antennas of a wireless repeater by receiving the transmit signal at the receive antenna of the identical repeater, and experiment results obtained by analyzing the measurements. This experiment uses 2 GHz WCDMA signal and is carried out near a highway. The high-speed mobiles on highways cause reflected signals with high Doppler frequencies and large energy. In order to characterize the feedback channel, the power delay profile and the scattering function are estimated by identifying the delay spread, the Doppler spread, the number of fingers, and the attenuation with delay. Since the feedback interference channel is constructed between the fixed TX and RX antennas, which is dependent upon the multipaths developed by moving or fixed objects around the antennas, the channel shows different properties comparing to the conventional channels between the base station and the mobile station. Therefore, the results presented in the paper are expected to provide guidelines for designing and evaluating wireless repeater systems.

An Efficient Channel Sounding Method for WPAN System (무선 PAN 시스템을 위한 효율적인 채널 사운딩 기법)

  • Cho, Ju-Phil
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.8 no.3
    • /
    • pp.9-14
    • /
    • 2008
  • In this paper, we propose the channel sounding scheme which is made for ideal communication between some application as well as the short distance of high speed data transmission in MIMO-OFDM system for Wireless PAN. This method is able to perceive the duration of the impulse response through the delaying of power delay profile, modeled a power delay profile which has an attenuate characteristic, and obtained the coefficient of channel response by ML (maximum likelihood). Through the amplitudes, phases and delays associated with each multipath component which were acquired from this channel sounding scheme, we can describe the wave propagation characteristics of channels between the transmitter and receiver so that the receiver could enhance not only the reliability but also the ability of communication link.

  • PDF