• Spatial Information Research
• /
• v.19 no.2
• /
• pp.71-76
• /
• 2011

In this paper, for using emerging patterns to define and analyze the significant difference of safe and non-safe power load lines, and identify which line is potentially non-safe, we proposed an incremental TFP-tree algorithm for mining emerging patterns that can search efficiently within limitation of memory. Especially, the concept of pre-infrequent patterns pruning and use of two different minimum supports, made the algorithm possible to mine most emerging patterns and handle the problem of mining from incrementally increased, large size of data sets such as power consumption data.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.40-47
• /
• 1997

안테나의 특성은 셀룰러 시스템의 서비스 품질에 직접적으로 영향을 미치는 요소가 되며, 특히 섹터화로 인한 용량의 증가를 기할 수 있는 CDMA 시스템의 경우에는 매우 중요한 의미를 갖는다. 본 논문의 지향성 안테나를 이용하여 전력 제어된 CDMA 셀을 섹터화할 경우 얻을 수 있는 용량의 이득을 논의한다. 용량의 측면에서 이상적인 안테나 패턴과 비교할 때 실제 안테나 패턴의 역방향 링크 용량 효율을 해석적으로 구한다. 셀룰러 CDMA 시스템의 용량은 동일한 주파수 대역을 사용할 수 있는 최대 통신 채널의 수이므로 용량 효율은 결국 주파수 스펙트럼 이용 효율을 의미한다. 측정된 반사판 섹터 안테나 패턴을 대상으로 분석한 결과를 제시하고 패턴 특성과 섹터 셀의 배치 구조에 따라 용량 효율이 86~97%로 변화함을 보인다.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.208-209
• /
• 2019

본 논문에서는 ESS를 이용한 전력 계통의 Peak-Shaving 제어 알고리즘 수립에 대한 연구 결과를 제시한다. 과거의 요일별 전력수요 데이터를 이용하는 경우 ESS가 포함된 전력 시스템의 연결점(PCC)에서 전력 및 에너지 평형 방정식을 수립할 수 있고, ESS의 전력 및 에너지 용량에 따른 전기요금 최소화를 목적 함수로 한 선형 계획법 문제를 정식화할 수 있다. 선형 계획법 문제 해결을 통해 ESS가 추가되는 경우에 대한 경제성을 분석할 수 있고, 이로부터 ESS의 적합한 용량도 선정할 수 있다. 또한 부하 크기 및 시간대별 ESS 최적 전력 이용 패턴을 확인할 수 있기 때문에 실 운용 로직 설계를 위한 가이드로 결과를 활용할 수 있다. 본 논문에서는 제안된 방법을 설명하기 위한 일 예시로서, 시간대별 전력 부하 패턴의 기존 연구 결과로부터 도출한 부하 전력 곡선을 이용하여 선형 계획법을 이용한 Peak-Shaving 최적 제어 결과를 제시하고, 이를 기반으로 실시간 운전 가능한 규칙 기반 알고리즘을 설계하여 ESS의 적용에 따른 요금 절감 효과를 제시한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.679-685
• /
• 2011

This paper presents an algorithm identifying devices that generate observed mixed signals that are collected at main power-supply line. The proposed algorithm, which is necessary for low cost electric power monitoring system at appliance-level, that is non-intrusive load monitoring system, divides incoming mixed signal into multiple time intervals, calculating difference-signals between consecutive time interval, and identifies which device is operating at the time interval by analysing the difference-signals. Since the features of one device can remain when the time interval is short enough and the features are independent and additive, well-known classification algorithms can be used to classify the difference-signals with features of N individual devices, otherwise $2^N$ features might be necessary. The proposed algorithm was verified using data mixed in a laboratory with individual devices's data collected from field. When maximum 4 devices operate or stop sequentially and when features satisfy the requirements of proposed algorithm, the proposed algorithm resulted nearly 100% success rate under the constrained test condition. In order to apply the proposed algorithm in real world, the number devices shall increase, the time interval shall be smaller and the pattern of mixture shall be more diverse. However we can expect, if features used follow guidelines of proposed algorithm, future system could have certain level of performance without the guideline.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.603-610
• /
• 2021

In this paper, we extract the user's power consumption patterns, and model the optimal consumption patterns by applying the user's environment and emotion. Based on the comparative analysis of these two patterns, we present an efficient power consumption method through changes in the user's power consumption behavior. To extract significant consumption patterns, vector standardization and binary data transformation methods are used, and learning about the ensemble's ensemble with k-means clustering is applied, and applying the support factor according to the value of k. The optimal power consumption pattern model is generated by applying forced and emotion-based control based on the learning results for ensemble aggregates with relatively low average consumption. Through experiments, we validate that it can be applied to a variety of windows through the number or size adjustment of clusters to enable forced and emotion-based control according to the user's intentions by identifying the correlation between the number of clusters and the consistency ratios.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.406-407
• /
• 2006

단일 공급자 중심으로 구성된 전력산업에 다수 참여자의 등장으로, 경쟁이 도입되는 전력 산업으로 변화가 예상되고 있으며, 이에 따라 전력 시스템의 각 구성요소에 대한 정량적 분석 및 평가가 절대적으로 요구되고 있는 실정이다. 이와 같은 환경 하에서 전력산업 주체는 수요자 측의 부하분석과 평가를 위한 기본 인프라의 구축과 여러 응용의 기본이 되는 수요자의 정보의 수집 및 분석 시스템의 개발을 필요로 한다. 현재까지의 수요 정보의 분석은 월간검침에 의한 통계적인 현황이 대부분이어서 각종 수요자에 대한 수요 패턴을 고려한 평가가 불가능하였다. 본 논문에서는 검침정보를 기반으로 수요자의 부하분석을 하기 위하여 Load profile 데이터를 패턴에 따라 분류하여 유사 수요특성을 도출하였다. 그리고 분류결과에 의한 수요그룹들의 특성을 분석하였고 이를 이용한 수요관리 둥의 응용을 위한 시스템 구축을 하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.85-95
• /
• 2004

As the design complexity increases, it is a major problem that the size of test pattern is large and power consumption is high in scan, especially system-on-a-chip(SoC), with the automatic test equipment(ATE). Because static compaction of test patterns heads to higher power for testing, it is very hard to reduce the test pattern volume for low power testing. This paper proposes an efficient compression/decompression algorithm based on run-length coding for reducing the amount of test data for low power testing that must be stored on a tester and be transferred to SoC. The experimental results show that the new algorithm is very efficient by reducing the memory space for test patterns and the hardware overhead for the decoder.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.4
• /
• pp.885-894
• /
• 2015

It is necessary to forecast the electricity demand for reliable and effective operation of the power system. In this study, we try to categorize a functional data, the mean curve in accordance with the time of daily power demand pattern. The data were collected between January 1, 2009 and December 31, 2011. And it were converted to time series data consisting of seasonal components and error component through log transformation and removing trend. Functional clustering by Ma et al. (2006) are applied and parameters are estimated using EM algorithm and generalized cross validation. The number of clusters is determined by classifying holidays or weekdays. Monday, weekday (Tuesday to Friday), Saturday, Sunday or holiday and season are described the mean curve of daily power demand pattern.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.265-271
• /
• 1999

In recent years, the electric utility industry in Korea has undergone fast change. Private power generation has been introduced by competitive bidding to improve economic efficiency and to strengthen the competitive generation market. In these private generation projects, the yearly pattern of purchase price between the utility and IPPs is very important. Currently, the levelized payment schedule is applied to capacity payment, and price escalation rates are reflected to energy payment. In this paper, we Proposed different patterns of payment and analyzed the outcomes. As a result, we found possibility of applying the partial front-loading pattern in Korean market to share the risk of the long-term business. And, the importance of discount rate is also found.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.1
• /
• pp.72-79
• /
• 2013

In the paper, a pattern analysis to decide whether the 1st local peak power point near open circuit voltage is the global peak power point or not, in case that the voltage and current at the 1st local peak power point are in a specific range, for Maximum Power Point Tracking on the photo voltaic power conversion system. When a solar cell panel array is shaded partially, multi-local peak power points can occur. That makes it hard to search the global peak power point. Through Tableau analysis using by piecewise linear solar cell model, V-I characteristic of a solar cell panel array circuit when partial shading problem happens, is simulated. The global peak power and the local peak power points is confirmed by simulations. Voltage and current values and patterns of V-I characteristic are analyzed. The generating efficiency of the solar cell panel array is improved, when the solar cell panel array circuit is operated at the power point estimated by setting up specific range.