• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.251-256
• /
• 2017

Recently, multicore processor system is widely adopted not only in general purpose computers but also in embedded systems and mobile devices in order to improve performance. Since the power dissipation issue of multicore processor system is very significant, it must be estimated accurately in the early design stage. In this paper, a fast power analysis tool for a high performance multicore processor based on the trace-driven simulator has been developed. To achieve it, the power dissipation of each hardware unit per core are added. Using SPEC 2000 benchmarks as input, the trace-driven simulation has been performed to estimate the average power dissipation per instruction.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.57-70
• /
• 2006

This paper descWireless Sensor Network consisting of a number of small sensors with transceiver and data processor is an effective means for gathering data in a variety of environments. The data collected by each sensor is transmitted to a processing center that use all reported data to estimate characteristics of the environment or detect an event. This process must be designed to conserve the limited energy resources of the sensor since neighboring sensors generally have the data of similar information. Therefore, clustering scheme which sends aggregated information to the processing center may save energy. Existing multi-hop cluster energy consumption modeling scheme can not estimate exact energy consumption of an individual sensor. In this paper, we propose a new cluster energy consumption model which modified existing problem. We can estimate more accurate total energy consumption according to the number of clusterheads by using Voronoi tessellation. Thus, we can realize an energy efficient cluster formation. Our modeling has an accuracy over $90\%$ when compared with simulation and has considerably superior than existing modeling scheme about $60\%.$ We also confirmed that energy consumption of the proposed modeling scheme is more accurate when the sensor density is increased.

• Journal of Energy Engineering
• /
• v.1 no.1
• /
• pp.53-57
• /
• 1992

지난 여름 우리는 하루 최대 전력소비량을 매일 갱신하는 무더위를 겪었다. 이처럼 근래들어 에너지위기라느니 에너지 고갈이라느니 하는 말이 심심찮게 들릴 정도로 에너지가 부족한 실정이다. 그만큼 에너지의 소비가 늘고 절대량이 부족한 것이다. 이는 인구가 증가하고 생활, 문화가 고급화되면서 소비가 늘었기 때문이지만 기술의 발달이 수요를 따를 만큼의 에너지를 공급해주지 못하기 때문이다. 그래서 발전소가 건설되고 있다. 그러나 몇몇 보고서에는 에너지 사용의 효율성이 떨어지기 때문이라는 지적도 있다. (중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.886-889
• /
• 2010

Power consumption measurement in sensor network is difficult to proceed by survey in real field. Thus, through simulation, the power consumption is estimated and replacement time of nodes are decided. A simulation tool simulates various facts such as power consumption, packet transmission traffic, network topology and etc. In this paper, it suggests sensor node power model to simulate power consumption which has large importance among simulation facts in sensor network. This model omits calculating expressions that the data originally surveyed can substitute with, according to power consumption property of each functions in sensor node in order to minimize calculations in simulation. In this case accuracy of power consumption estimation will be reduced, but can simulate it faster due to reduced calculation. Suggested model is fitted to analyze power consumption difference between two or more sensor network algorithms with rapid simulation speed rather than accurate simulation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.5
• /
• pp.59-69
• /
• 2011

Since power analysis attack which uses a characteristic that power consumed by crypto device depends on processed data has been proposed, many logics that can block these correlation originally have been developed. DRP logic has been adopted by most of logics maintains power consumption balanced and reduces correlation between processed data and power consumption. However, semi-custom design is necessary because recently design circuits become more complex than before. This design method causes unbalanced design pattern that makes DRP logic consumes unbalanced power consumption which is vulnerable to power analysis attack. In this paper, we have developed new logic style which adds another discharge phase to discharge two output nodes at the same time based on DyCML to remove this unbalanced power consumption. Also, we simulated 1bit fulladder to compare proposed logic with other logics to prove improved performance. As a result, proposed logic is improved NED and NSD to 60% and power consumption reduces about 55% than any other logics.

• Journal of the Korean Institute of Gas
• /
• v.4 no.4 s.12
• /
• pp.13-19
• /
• 2000

Researches on unused energy are being continued because of the limited fossil fuel and the destruction of environment. Therefore this study was performed as follows The collectable amount of exhausted heat for an air-conditioning was calculated by the subway thermal environment prediction program. And the electric power needed by conventional heat source equipments was compared with one by unused heat source equipments when the exhausted heat was used by heat pump in heating and hot water supplying.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.545-548
• /
• 2012

1차 에너지 소비량은 계속 증가 되고 있는데 화석연료의 고갈과 기후문제 등으로 소비량을 줄이기 위해 원자력발전과 신재생에너지인 풍력 및 태양광 등이 현재 증가하고 있다. 하지만 증가하는 부하에 대한 대응방안으로 원자력 발전소는 가변제어가 아닌 고정방식이기 때문에 기저부하에 대한 공급을 담당하고 신에너지는 발전량이 일정하지 않기 때문에 또한 피크부하 대응에 불가능하다 그러므로 양수발전소 또는 다른 발전소를 통해 피크부하를 관리하고 있는 상황이다. 하지만 단 몇 시간의 피크부하를 위해 지속적인 발전소를 지을 수 있는 부지도 없고 건설시간도 매우 많이 걸리는 단점이 있다. 본 논문에서는 양수발전 또는 다른 발전소를 대체할 수 있는 전력저장시스템(BESS)의 부하평준화효과에 대한 경제성평가 기법에 대하여 제시한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1730-1738
• /
• 2001

This paper presents an overview of testing and analyzing field performance of a centrifugal chiller which has a rated capacity of 200 RT(703 kW). Field data of a chiller installed in the cleanroom research building of KIST has been collected far performance analysis. The operating data included start-up, shut-down, and quasi-static state where cooling capacity and compressor power consumption varied cyclically. It was found that the steady-state thermodynamic model could be applied to relate the cooling capacity and COP under quasi-static conditions. The results led to finding the required cooling load pattern and a possible energy saving method. This study provides a method of evaluating performance of a large capacity centrifugal chiller in which field test is necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4610-4615
• /
• 2013

In this study, optimal operation strategies to save the electric energy and power price in the building central cooling system is researched by experiments. The optimal strategies of demand response control and outdoor temperature reset control algorithms are applied by consideration the electric energy and power price according to the energy consumption characteristics. The suggested optimal control method shows better responses in the power price and energy consumption in comparison with the conventional one and saves energy consumption by 9.5% and electronic price by 15.7%, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.257-258
• /
• 2015

Korean power consumption of the electrical supply problems due to excess demand is repeated every year, the interest in energy increasing social and personal cost has been subject to the number of ways to reduce this cost increases. Automatic doors and automatic door installation market is increasing every year and frequently, when used in general commercial and communal porch consumption based on average 300 times a day power is 70[W] degree is a monthly average usage is about 50.4[KW]. The level can not ignore the power consumption due to switching frequency is large. In this paper, by converting the energy to be discarded in the automatic doors to the inverter and the regenerative energy and to develop control systems for power regeneration to reduce the power consumption by utilizing automatic contact auxiliary power.