• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.300-302
• /
• 2009

적층형 가유전체 구조는 유효유전율과 유효투자율은 주어진 표준형 전송선로의 경우보다 증가하므로 결과적으로 전송선로의 길이를 짧게 할 수 있는 장점이 있다. 따라서 회로의 소형화에 유용하게 사용될 수 있는데, 본 논문에서는 한 예로써 대표적인 무선 회로인 윌킨슨 전력분배기의 소형화된 회로에 대하여 기술하고 있다. 표준형 회로와 적층형 가유전체 구조를 이용하여 소형화한 윌킨슨 전력분배기를 2GHz 대역에서 설계하여 실제로 제작하여 측정한 결과를 제시한다. 종래의 표준형 회로와 비교할 때, 동일한 성능을 유지하면서도 회로의 크기가 32%만큼 감소한 결과가 소개된다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.1
• /
• pp.28-36
• /
• 1995

In this paper, a design method of multiple n-way low loss power divider for x-band is propossed. To decrease loss, only two-stages of transmission lines are used with isolation resistors for match. Ex- perimental results for 3-way and 4-way power dividers have the divided power of 5.54~6.17dB and 6.76~7.37 dB, the return loss of more than 17dB and 12dB, and the isolation of more than 18dB and 10dB at center frequency, respectively, The measured results show good agreement with the theoretical analysis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.73-79
• /
• 2015

Enhanced bandwidths of the GPS microstrip patch antennas applied by a Wilkinson power divider and a quadrature hybrid were compared. The square patch was designed, and fed by the two port probes for the circuit application. The Wilkinson power divider and quadrature hybrid circuit were designed, and applied to the patch antenna. The designed patch and two circuits were implemented on the FR4 board, and combined together. The measurement of the bandwidth within a voltage standing wave ratio (VSWR) of 2: 1 were 36.5% (1,200~1,775 MHz) in the case of the Wilkinson power divider and 29.84% (1,230~1,700 MHz) in the case of the quadrature hybrid. Axial ratios (AR) in 3dB were 17.14% bandwidth (1,360~1,630 MHz) and 15.87% bandwidth (1,400~1,650 MHz), respectively. The application of the Wilkinson power divider is wider than that of the quadrature hybrid. The peak gains in the anechoic chamber at the GPS center frequency were measured as 2.84 dBi and 2.75 dBi, respectively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.357-360
• /
• 2003

본 논문에서는 $90^{\circ}$ 하이브리드 결합기에 여파기 특성을 결합하여 전력분배와 하모닉 저지특성효과를 보여주고 있다. 일반적인 $90^{\circ}$ 하이브리드 결합기는 위상차를 갖고 전력을 분배, 합성하는 데에만 쓰이고 있기 때문에 비선형 소자와 결합함으로써 생기는 하모닉 성분을 억제하려면 여파기를 따로 설계해야 하는 단점이 있다. 그래서 본 논문에서는 하이브리드에 저역통과 여파기 특성을 결합함으로써 위상차와 전력분배는 물론 여파기 특성인 감쇠효과를 이용하여 하모닉 성분을 크게 감소시킬 수 있는 구조를 연구하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.721-728
• /
• 2009

Equal/unequal 4-way power divider suitable for satellite communication using SIW technology is presented in this paper. The control of positions of guiding posts provides equal or unequal power division ratios by maintaining the width of the SIW unchanged. In addition, the detailed descriptions for the proposed power divider include the general characteristics of radial waveguide, feeding part using coaxial cable, simple SIW structure, power-guiding posts, and transition for measurement. The comparison between the simulated and measured data shows a good agreement at a center frequency of 10 GHz. The measured input impedance bandwidths for equal and unequal power divisions are about 2.1 GHz and 3 GHz under the condition of less than VSWR 2:1, respectively.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.846-847
• /
• 2008

본 논문에서는 유한요소법을 이용한 전력용 변압기의 기초 설계에 대하여 다루고자 한다. 전력용 변압기 설계 및 해석을 위해 원하는 사양의 전력용 변압기 치수결정이 선행되어야 한다. 본 논문에서는 전력용 변압기의 치수결정을 위해 장하분배법을 기반으로 하는 기초 설계 프로그램를 제작하였다. 설계 프로그램을 이용해 결정한 치수에 의해 전력용 변압기를 모델링 하였고, 유한요소법을 이용하여 자계해석을 하였다. 유한요소해석에 의한 각 사양별 전력용 변압기의 자기적 특성값과 장하분배법에 의한 기초 설계 계산값을 비교.검토하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.837-843
• /
• 2008

This paper proposes a power divider based on meta-material structure with dual-band operation. The meta-material structures of left-hand characteristic are constituted of series capacitors and shunt inductors, but they have parasitic series inductance and shunt capacitance effects. There is represented the composite right/ left-handed transmission line (CRLH-TL) model. When the power divider is implemented by using the CRLH-TL, the power divider can operate dual band. To verify the power divider with dual band, we are implemented to operate dual-band that is 0.88 GHz and 1.67 GHz. The characteristics of divider have the return loss less than each 21.0 dB and 15.8 dB and the insertion loss better than 3.83 dB and 3.64 dB at each frequency. Also, the output phase difference is $3{\sim}6^{\circ}$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.117-124
• /
• 2015

In this paper, a new kind of wideband, low-loss composite right/left-handed (CRLH) transmission line (TL) and a Wilkinson power divider are presented. The TL is composed of a parallel meander inductor and a series cutting capacitor based on coplanar waveguide (CPW) structure. The power divider is designed by substituting the CRLH-TL into the conventional transmission line. The experiment results show that the TL has a good agreement with the desired results, exhibiting the return losses under 12 dB from 8.4 GHz to 34.4 GHz. The operating frequencies of the power divider are 12.05 GHz to 13.15 GHz and 16.50 GHz to 19.30 GHz, respectively. The 20 dB bandwidths are 8.9 % and 17.9 %, respectively. Typical experimental measurements are conducted and compared with the simulated results.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.687-692
• /
• 2013

This paper presents a compact power divider using microstrip-slotline transition technology. By using the microstrip-slotline transition, the ${\lambda}/4$ transmission lines of the divider can be changed to two ${\lambda}/8$ transmission lines in the multilayer structure. In the microstrip-slotline transition, we have used via holes to make a short circuit at the microstrip line and embedded spiral configuration stubs to reduce the electrical length of an open circuit at the slotline end point. For validating the microstrip-slotline technique, we have simulated and implemented the power divider with embedded spiral and via hole configuration circuits at a frequency of 2 GHz. Good agreement between the simulation and the measurement results is obtained at the operating frequency.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.774-780
• /
• 2011

This paper presents a Bagley polygon and Gysel divider using open-stub loaded transmission line. The structure of slow-wave characteristic consists of small transmission line and shunt capacitive open stub that have reduced characteristic impedance and phase velocity, so we can implement the small circuit size. To validate the slow-wave characteristics, we are implemented the slow-wave characteristic of Bagley polygon and Gysel divider at center frequency 2.1 GHz. Its characteristics are same, but the circuit size is reduced above 15 % respectively.