• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제19권11호
• /
• pp.1281-1286
• /
• 2008

The PSK carrier signal recovery circuit using a six-port phase correlator was analyzed and the circuit structure is proposed in this paper. The proposed carrier signal recovery circuit that is made of reflection element and six-port phase correlator, which is comprised of a power divider and three hybrid branch line couplers, give a simple structure and can be fabricated without no difficulty. The circuit recovers the carrier signal of BPSK and QPSK modulation signal. The proposed scheme can be utilized as a basis structure for high-mode PSK carrier signal recovery. By simulation results, the recovered signal by the proposed circuit shows a good carrier signal characteristic with CW signal of a constant phase($23.4^{\circ}$) and ${\pm}0.8^{\circ}$ phase error due to glitch conditions.

• Journal of Bio-Environment Control
• /
• 제31권4호
• /
• pp.366-375
• /
• 2022

The monitoring of electricity consumption using Internet of Things (IoT) technology is attracting attention as a technology to reduce operation costs of smart farms. In this study, we propose a method to apply a real-time electrical consumption monitoring system (the e-Gauge system) and utilization of the collected data real-time while a melon-producing smart farm is in operation. For this purpose, the electrical consumption data for the individual smart-farm facilities such as boilers, nutrient distribution systems, automatic controllers, circulation fans, boiler controllers, and other IoT-related utilities were collected during three months of melon cultivation period. By using the monitoring results, the electrical energy consumption pattern was analyzed as an example, and necessary considerations needed to optimally utilize the measurement data were suggested. This paper will be useful in lowering the technological implementation barriers for new researchers to build a electrical consumption monitoring system and reducing trial and errors in the usage of the generated data.

• Journal of Digital Convergence
• /
• 제10권10호
• /
• pp.313-318
• /
• 2012

In this study, we propose a low-noise transceiver for 10GHz motion sensor. The transceiver presented here has a circuit(Hittite HMC908LC5) that is composed of a two way-$0^{\circ}$ power splitter(the 1:2 block) and a $90^{\circ}$ Hybrid. The noise reduction circuit utilizes an LNA followed by an image reject mixer which is driven by an LO buffer amplifier. A modeling and analysis have been pursued using CST MWS. A prototype sensor was manufactured to measure the performance and experimental results show that the proposed sensor is good enough to use for a accurate motion sensor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제15권12호
• /
• pp.1131-1140
• /
• 2004

In this paper, we proposed a flate-plate antenna employing semi-annular slots for satellite broadcast reception. The radiating element of the antenna is dual annular slots fed by a strip dipole, which have a wider bandwidth than the rectangular slot. A $16{\times}16$ array antenna is designed using stripline T-junction power dividers. Measurements of the fabricated antenna show a gain of 28.0$\~$29.5 dB in 11.7$\~$12.8 GHz frequency range.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제61권8호
• /
• pp.1159-1163
• /
• 2012

In this paper, a new method is suggested to reduce the size of a wide-band array antenna. The power-divider for the feeding structure is made compact as ${\lambda}/8$ with the help of a novel Metamaterial UWB bandpass filter. This power divider is clearly different from others in that the proposed design uses microstrip structured Composite Right and Left-Handed (CRLH) filters, while others use two dielectric layers or long tapered transmission lines. In order to validate the proposed design method, the circuit and full-wave simulated results of the power divider with the Metamaterial UWB filters are compared to each other, and the Metamaterial properties of the structure are shown with the electric field at the ZOR and dispersion diagram. Furthermore, the antenna performance of the fabricated antenna with the power divider is measured and compared with the prediction. Also, the size reduction effect by the proposed scheme is addressed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제18권11호
• /
• pp.1774-1784
• /
• 1993

This paper presents the design, fabrication and measured results of the broadband microstrip array with a conical radiation pattern and the circular array composed of six square microstrip antenna elements. Each element antenna has the stacked structure with a parasitic element to achieve a broadband characteristic and a branch line quadrature hybrid is attached to it for the circular polarization. The design procedures and measured results of the scheme for obtaining the conical radiation pattern which is useful for the mobile communication via the satellite. Finally, the performance of the fabricated antenna is measured and compared with the theory.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.644-647
• /
• 2004

RF 시스템에서 발룬(Balun)은 회로기판과 집적회로 사이의 임피던스 매칭에 사용되는 소자로서, 전력의 균등한 분배와 함께 180도 위상차를 만드는 역할을 하는 주요 회로부품이다. 시스템의 요구사양에 따라 balanced 임피던스가 $50\Omega$인 소자뿐만 아니라, 25 또는 100, $200\Omega$인 소자들도 많이 사용되는데, 대부분의 계측기가 $50\Omega$을 I/O 임피던스로 설정하고 있어, balanced 임피던스가 $50\Omega$이 아닌 경우 특성을 측정하기 위해서는 별도의 지그설계가 필요하다. 본 연구에서는 중심주파수가 900MHz이고, balanced 임피던스가 $100\Omega$이며, LTCC 모듈 내에 내장되는 임베디드 발룬의 최적 평가를 위한 PCB 측정지그의 구조에 대하여 설계 및 시뮬레이션을 실시하고, 이에 따라 제작된 지그를 시뮬레이션 결과와 비교하였다. 지그를 구성하는 마이크로스트림의 임피던스를 조절함으로써 유효한 측정주파수범위를 넓힐 수 있었으며, 제작된 지그는 설계치에 거의 근접한 전송특성을 나타내었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제26권3호
• /
• pp.227-247
• /
• 2015

An X-band $8{\times}16$ dual-polarized active phased array antenna system has been implemented based on the substrate integrated waveguide(SIW) technology having low propagation loss, complete EM shielding, and high power handling characteristics. Compared with the microstrip case, 1 dB less is the measured insertion loss(0.65 dB) of the 16-way SIW power distribution network and doubled(3 dB improved) is the measured radiation efficiency(73 %) of the SIW sub-array($1{\times}16$) antenna element. These significant improvements of the power division loss and the radiation efficiency using the SIW, save more than 30 % of the total power consumption, in the active phased array antenna systems, through substantial reduction of the maximum output power(P1 dB) of the high power amplifiers. Using the X-band $8{\times}16$ dual-polarized active phased array antenna system fabricated by the SIW technology, the main radiation beam has been steered by 0, 5, 9, and 18 degrees in the accuracy of 2 degree maximum deviation by simply generating the theoretical control vectors. Performing thermal cycle and vacuum tests, we have found that the SIW array antenna system be eligible for the space environment qualification. We expect that the high efficiency SIW array antenna system be very effective for high performance radar systems, massive MIMO for 5G mobile systems, and various millimeter-wave systems(60 GHz WPAN, 77 GHz automotive radars, high speed digital transmission systems).

• Journal of Advanced Navigation Technology
• /
• 제15권1호
• /
• pp.97-103
• /
• 2011

This paper presents a dual-band balanced mixer using nonlinear phase characteristic of composite right/left-handed (CRLH) transmission line. This metamaterial structure provides low LO leakage and high RF to LO isolation without additional filters for LO and RF path. The balanced mixer consists of balun and Wilkinson divider with dual-band characteristic of unit-cell which behaves like a CRLH metamaterial. Experimental results are used to verify the proposed metamaterial functions. The balanced mixer design results in an operating frequency of 870 MHz and 1660 MHz with an optimum mixer conversion loss of 15.2 dB at 870 MHz and 21.2 dB at 1660 MHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제27권10호
• /
• pp.900-908
• /
• 2016

In this paper, we have studied the tracking system with a single channel monopulse receiver that has a comparative advantage of costs, size, weight, and power consumption over the general 3-channel monopulse receivers. After the single channel monopulse system was composed of an antenna, a monopulse receiver, a servo unit, a RF signal processor unit and a power supply unit, we analyzed the basic tracking performance of the tracking error angle and the pointing loss. And we proved the tracking performance to a moving target in the outdoor environment. On the Analysis of the tracking test results, the single channel monopulse system shows a equal or higher performance over the general 3-channel monopulse system and also has advantages of the system implementation. Also, it is concluded that this study is useful to apply a single channel monopulse receiver with benefits of production price and miniaturization when the monopulse tracking systems will be developed in the future.