• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.91-93
• /
• 2005

본 논문에서는 전력기기의 온라인 진단을 위하여 개발된 모니터링 시스템에 대하여 소개하고자 한다. 개발된 진단 플랫폼은 전력기기의 온라인 진단을 위해 측정된 부분방전 신호를 이용하여 진단을 위한 파라미터를 추정하고 추정된 결과를 인터넷을 통해 실시간으로 모니터링 할 수 있도록 제작되었다. 개발된 진단 플랫폼은 연산처리를 위한 DSP 신호처리 부분과 웹서비스를 위한 VM부분으로 구성되어 있다. VM부분은 스트롱암 기반의 플랫폼을 적용하였으며 리눅스 환경에서 자바 가상머신을 이용하여 웹 서비스를 구현하였다. 본 논문에서 제시된 기술은 향후 산업용 장치들의 웹 기반 진단 및 모니터링 기술에 이용될 예정이며 또한 스마트 센서 모듈 및 분산 제어 시스템 모듈 개발에 응용될 수 있다.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.234-236
• /
• 2004

매년 에너지 사용이 급증하고 있는 우리나라 현실을 고려하여 본다면 에너지 비용 상승에 대한 수용가의 능동적 대책이 절실히 요구된다. 단순한 에너지 감시 차원을 넘어서 수용가의 에너지 사용 계획 수립에 도움이 될 수 있는 전력 에너지 분석 정보가 요구된다고 할 수 있다. 본 논문에서는 당사에서 개발 중인 전력 에너지 사용량 분석 프로그램의 주요기능과 시스템 구성에 대하여 소개하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.3-6
• /
• 2009

변압기 무선부하감시 시스템에서 30분 간격으로 계측된 부하 데이터와 GIS-AMR 데이터웨어하우스로부터 변압기 속성 및 공간적 특징을 추출하여 정확한 변압기의 부하 패턴을 예측하기 위한 시공간 패턴 마이닝 기법을 적용하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.638-644
• /
• 2010

This paper presents ideas of service scenarios for home residents using electric power monitoring system per appliance, the implementation of the monitoring system, and analysis of acquired electric power usage pattern. By acquiring and analyzing electric power usage pattern, home residents can get information of power usage pattern of every legacy (non-Demand Response-ready) appliance. Further they can get pieces of recommendation how to reduce energy consumption, intelligent standby power blocking service, and alarming service to abnormality of appliances. In order to check the feasibility of the ideas, a system that can acquire electric power pattern per appliance is implemented, and electric power pattern of some appliances are stored to a database and it was analyzed to show if auto-identification of a type of a device is possible, which is a basic required function for the scenarios presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1824-1831
• /
• 2009

This paper analyzes the propagation speed of the wide-area power system frequency. When a generator supplying the electric power to the grid is accidently tripped due to a disturbance on the systems, power system frequency suddenly drops during the transient period and this propagates from the location of the tripped generator to the other part of the systems like a wave. Since the propagation speed of the power system frequency depends on the own characteristics of power systems, its understanding from the perspective of the wide-area can help us in understanding power systems more correctly. In addition, the propagation speed of the power system frequency is used as a key parameter in the application study of IT based on the internet-based GPS synchronized frequency monitoring network (FENT) which has been recently implemented and operated in U.S. power systems. This paper simulates the generation trip on various locations in U.S. power systems deploying its latest dynamic model and calculates the propagation speed of the power system frequency for the application of FNET.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.581-584
• /
• 2009

Recently, the cameras which used for observation are installed in children protection area and local crime prevention area in order to protect life and property and by its work being recognized and are installed more. Normal cameras have cost problem to observe multiple area and detail, because they can observe only one place. PTZ camera can observe multiple area by moving focus by schedule or remote control, but it can't automatically move the focus of it to the place where event occurred, because it can't recognize the place. In this study, we can monitor multiple area effectively, by installing a wireless sensor node equipped with temperature, lighting, gas and human detection sensor to each area, to monitor many place low-price and actively and to move the focus of PTZ camera to preset position, and send recorded video to the user, when the various sensor data received from wireless sensors in observation area are to be determined abnormal by analyzing. In addition, at night we can record a scene using infrared, but to reduce power consumption of lighting system which are installed to improve resolution, it supplies power to the lighting system when event occurred. So we were able to implement low power green monitoring system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.59-65
• /
• 2007

Recently, ubiquitous sensor network(USN) techniques have been applied to electric power facility management. This paper dealt with the designed and fabricated ubiquitous sensors which monitor transformers and lightning arresters installed in overhead distribution systems. The sensors consist of a 8-[bit] microprocessor unit, a wireless communication nodule specified in IEEE 802.15.4, and associated electronics. A Rogowski coil was fabricated to measure load of transformer and surge current without saturation having good linearity up to 1000[A]. A zero-phase current transformer with a high relative permeability of $10^5$ at 180[Hz] was used to detect small leakage current of $50[{\mu}A]{\sim}1[mA]$ flowing lightning arrester, and the frequency bandwidth of the module is ranges from 12[Hz] to 1.24[kHz] at -3[dB].

• Journal of Internet of Things and Convergence
• /
• v.3 no.1
• /
• pp.13-19
• /
• 2017

In this paper, we designed and implemented Thing Connected-Green, a self-installing agricultural automation system capable of remote monitoring and control based on Low Power Wide Area communication technology (LPWA). Farming requires water, sunlight, soil, fertilizer, temperature control, etc., and these elements can be remotely monitored and controlled using an automated system. Using this system, it is possible to construct an agricultural automation system which can be optimized according to the kind of plant and cultivation environment from vinyl house to flower garden. The information gathered from the sensor is stored in the server through the gateway, and the optimal cultivation environment can be set and operated using the smart phone based on the big data.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.259-268
• /
• 2016

KEPCO installed AMI (Advanced Metering Infrastructure) metering system for low-voltage customers from 2008. AMI metering system of KEPCO has operated 2.55 million customers and will plan to operate 22 million customers until 2020. KEPCO developed AMI NMS (Network Management System) to operate the meter reading network efficiently. NMS monitors the network status of DCUs (Data Concentration Unit) and modems. NMS provides functionalities of data collection and analysis. It collects property data of network device, network topology information, communication performance information, fault information, and etc. It analyzes collected data and controls network devices by remote access. AMI NMS collects about 370 MIBs (Mangement Information Bases) using SNMP (Simple Network Management Protocol). This paper introduces main functionalities, designed context, and implemented service screen.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.239-244
• /
• 2017

The demand for electric power is increasing every year. All facilities operating at power stations and all facilities used in transmitting high volumes of electric power are therefore expected to operate with a high degree of reliability. 6.6 kV XLPE 100 SQ 1C cables are used to deliver high levels of generated electric power. Depending on the method of manufacture, installation environment, and usage conditions, the deterioration processes of power cables start from the instant of operation. Cable junctions may break down in three years from the start of operation due to manufacturing or construction defects. We have invented the first device in Korea to monitor the status of live cables and installed these at Korea Western Power Co., Ltd.. We have set the criteria to determine deterioration status and specified the degree of deterioration at which one should replace the cables. In this paper, we present the effect of insulation layer and sheath on the insulation resistance status in cables.