• Title/Summary/Keyword: 전도대

Search Result 247, Processing Time 0.023 seconds

Calculation of Unsaturated Hydraulic Conductivity from Soil Moisture Changes in Pressure-Plate Extractor (Pressure-Plate Extractor 내(內) 토양수분함량(土壤水分含量) 변화(變化)로부터 불포화수리전도도(不飽和水理傳導度)의 계산(計算))

  • Ro, Hee-Myeong;Yoo, Sun-Ho
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.17 no.1
    • /
    • pp.7-11
    • /
    • 1984
  • A study was carried out to develop a modified Gardner's method, which enabled us to obtain simultaneously both the unsaturated hydraulic conductivities and the moisture retention curves by the use of a soil moisture pressure-plate extractor. The unsaturated hydraulic conductivity was calculated from soil moisture changes under different tension ranges in the pressure- plate extractor by means of Gardner's pressure-plate outflow equation. From 30mbar-tension to 10bar-tension, the unsaturated hydraulic conductivities obtained on three soils (Bonryang sandy loam, Yesan silt loam, and Pogog clay loam) varied $3.09{\times}10^{-2}cm/day{\sim}4.06{\times}10^{-6}cm/day$, $1.34{\times}10^{-2}cm/day{\sim}7.30{\times}10^{-6}cm/day$, and $1.83{\times}10^{-2}cm/day{\sim}8.50{\times}10^{-6}cm/day$, respectively. In comparison with the outflow method, it is inconvenient to perform the periodic determinations of the soil moisture content that require release of the applied Pressure before readjusting the pressure desired for each measurement. Nevertheless, the main advantage of the modified method is that the unsaturated hydraulic conductivities of different soils can be calculated simultaneously with a small amount of each soil sample. It is concluded that the unsaturated hydraulic conductivity can be calculated from soil moisture changes in the soil moisture pressure-plate extractor.

  • PDF

Comparison of Digital Filters with Wavelet Multiresolution Filter for Electrogastrogram (위전도 신호처리를 위한 웨이브렌 필터와 디지털 필터의 비교)

  • 유창용;남기창;김수찬;김덕원
    • Journal of Biomedical Engineering Research
    • /
    • v.23 no.2
    • /
    • pp.109-117
    • /
    • 2002
  • Electrogastrography(EGG) is a noninvasive method for measuring gastric electrical activity on the abdomen resulting from gastric muscle. EGG signals have a very low frequency range (0.0083 ~0.15 Hz) and extremely low amplitude(10~100 uV). Consequently, EGG signal is easily influenced by other noises. Both finite impulse response(FIR) and infinite impulse response (IIR) filters need high orders or have phase distortions for passing very narrow bandwidth of the EGG signal. In this study, we decomposed EGG signals using a wavelet multiresolution method with Daubechies mother wavelet. The EGG signals were decomposed to seven levels. We reconstructed signal by summing the decomposed signals from level four to seven. To evaluate the performance of the wavelet multiresolution filter(WMF) with simulated EGG signal using two kinds of FIR and four kinds of IIR filters., we used two indices; signal to noise ratio(SNR) and reconstruction squared error(RSE). The SNR of WMF had 9.5, 6.9, and 4.7 dB bigger than that of the other filters at different noise levels, respectively. Also, The RSE of WMF had $1.22{\times}10^6, 1.16{\times}10^6, 1.02{\times}10^6$ smaller than that of the other filters at different noise levels, respectively. The WMF performed better in the SNR and RSE than two kinds of FIR and four kinds of IIR filters.

Insulating Properties between Cryocooler and Magnet for the Conduction-Cooled HTS SMES System (전도냉각형 고온초전도 SMES의 냉동기와 마그네트 간의 절연 특성)

  • Choi Jae-Hyeong;Kwag Dong-Soon;Cheon Hyeon-Gweon;Kim Hae-Jong;Seong Ki-Chul;Kim Sang-Hyun
    • Progress in Superconductivity and Cryogenics
    • /
    • v.8 no.3
    • /
    • pp.45-48
    • /
    • 2006
  • The conduction-cooled HTS SMES is operated in cryogenic and high vacuum condition. Thus. Insulation design at cryogenic temperature and high vacuum is a key and an important element that should be established to accomplish compact design is a big advantage of HTS SMES. However, the behaviors of insulators for cryogenic conditions in vacuum are virtually unknown. Therefore, active research and development of insulation concerning application of the conduction cooled HTS SMES was needed. In this study, the insulation characteristics at experimented high vacuum and cryogenic similar to running condition of SMES system. Also, investigated about insulation characteristics of suitable some materials to insulator for conduction-cooled HTS SMES. As these results. the basis data was obtained for insulation materials selection and insulation design for development of 600kJ class conduction-cooled HTS SMES.

세계의 원자력

  • 한국원자력산업회의
    • Nuclear industry
    • /
    • no.3_4 s.20
    • /
    • pp.29-39
    • /
    • 1980
  • 일본은 여러 가지의 뜻에서 우리와 관련이 큰 나라다. 우리가 일본의 원자력계 움직임을 주시검토하는 것은 우리나라 원자력계를 위해 많은 도움이 되는 일일 것이다. 80년대의 첫걸음을 내딛는 일본원자력계는 그 전도가 평탄하기만 하지는 않을 것이라고 그들은 말하고 있다. TMI 사고대책, 포스트 INFCE체제의 확립, 입지대책, 우라늄농축, 재처리를 위시해서 대규모의 원자력개발을 하기 위한 기반이 되는 계획 등이 크게 실용화로 비약하려는 일들이 그들앞에 가로놓여 있다고 한다. 그러나 금년이 일본의 앞으로 원자력개발 자립화로의 하나의 큰 스텝이 되는 것은 틀림이 없는 것 같다.

  • PDF

Memory Characteristics of MNOS Devices (MNOS 소자의 기억특성)

  • 서광열;박영걸;김태만
    • Electrical & Electronic Materials
    • /
    • v.1 no.3
    • /
    • pp.243-250
    • /
    • 1988
  • 530A의 질화막과 23A의 엷은 산화막두께로 제작된 MNOS 소자의 기억트랩분포와 기억특성을 TSC방법과 C-V방법으로 조사하였다. 소자는 전기적으로 기억갱신이 가능하며 무전압유지가 반영구적임을 확인하였다. 기억트랩에 해당하는 TSC곡선을 분석하는데는 공간적, 에너지적인 트랩의 분포모형을 가정하고 best fitting법을 사용하였다. 그 결과 기억트랩은 질화막-산화막 계면에서 질화막안으로 10A 깊이로 분포되었으며 에너지준위는 질화막전도대 하단에서 2.35-2.38eV로 분포되어 있음을 밝혔다. 또한 방전기구는 산화막층을 통한 직접터널링과 열적여기를 함께 고려하여 설명할 수 있었다.

  • PDF

The Study of Influence Factor of Head Restraints on the Whiplash by using DFSS (DFSS 기법을 이용한 후방 추돌 시 경부 상해 감소를 위한 머리지지대 인자의 영향성 연구)

  • Oh, Hyungjoon;Seo, Sangjin;Yoo, Hyukjin
    • Journal of Auto-vehicle Safety Association
    • /
    • v.4 no.2
    • /
    • pp.5-10
    • /
    • 2012
  • Whiplash is the most frequent injury among occupants in low speed rear-end car collision. The aim of this paper is to analyze thecorrelation between influence parameters of head restraints and whiplash injury criteria.In this paper, DFSS (Design for Six Sigma) method is used for optimum design of head restrains. Four control factors of head restraints have selected by function matrix method. The effects of the control factors have been experimentally evaluated by using a sled pulse from 16km/h relative velocity which is suggested by KNCAP (Korean New Car Assessment Program). In order to reduce the noise factors of dynamic tests, whiplash tests were repeated twice. By using DFSS, the correlation between control factors and injury criteria has been comprehended.

Modeling the Groundwater Flow in the Near-field of the Near-surface Disposal System (표층처분시스템 근계영역의 지하수 유동에 대한 모델링 연구)

  • Kim, Jung-Woo;Bang, Je Heon;Cho, Dong-Keun
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.18 no.2
    • /
    • pp.119-131
    • /
    • 2020
  • A numerical model was developed using COMSOL Multiphysics to evaluate groundwater flow that causes radionuclide migration in the unsaturated zone of a near-surface disposal facility, which is considered as a domestic low and an intermediate-level radioactive waste disposal facility. Each scenario was modeled by constructing a two-dimensional domain that included the disposal vault, backfill, disposal cover, and unsaturated aquifer. A comparison of the continuous and intermittent rainfall conditions exhibited no significant difference in any of the factors considered except the wave pattern of water saturation. The input data, such as porosity and residual water content of the unsaturated aquifer, were observed to not have a significant effect on the groundwater flow. However, the hydraulic conductivity of the unsaturated aquifer was found to have a significant effect on the groundwater flow. Therefore, it is necessary to assess the hydraulic conductivity of an unsaturated aquifer to determine the extent of groundwater infiltration into the disposal vault.

A Novel Frequency Selective Surface: Frequency Selective Fabric Composite (새로운 주파수 선택 표면: 주파수 선택적인 직물 복합 재료)

  • Lee, Sang-Eui;Kim, Chun-Gon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.17 no.10 s.113
    • /
    • pp.920-928
    • /
    • 2006
  • Fiber-reinforced composites transmitting microwaves of certain frequencies or bands were proposed. These frequency selective fabric composites(FSFCs) are fabricated by weaving carbon fibers and dielectric fibers that build periodic patterns. Design parameters affecting the electromagnetic characteristics of FSFCs were widely discussed, Then the electromagnetic characteristics of a fabricated plain-weave FSEC were investigated with regard to the electrical conductivities of carbon roving, the fiber undulation, and the aperture-to-cell ratio, for the electrical conductivities, its dependence on frequency as well as on the fiber volume fraction of carbon roving was taken into account. Constituent material properties and the fiber undulation had little effect on the EM properties of the fabricated FSFC, while the aperture-to-cell ratio made a profound effect on them.

Study on Relation between $H_2$ Evolution and Photoelectrical Properties of Photoanode (광어노드의 수소 제조와 광전기 특성에 관한 상관관계 연구)

  • Bae, Sang-Hyun;Kang, Joon-Won;Shim, Eun-Jung;Yoon, Jae-Kyung;Joo, Hyun-Ku
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.18 no.3
    • /
    • pp.244-249
    • /
    • 2007
  • The present work considers the concept of enzymatic photoelectrochemical generation of hydrogen through water splitting using a Xe lamp as a source of light. A solar cell was applied to the system in order to shift the level of electrochemical energy of the system, resulting in the rate of hydrogen production at $43\;{\mu}mol/(cm^2{\times}hr)$ in cathodic compartment with an anodized tubular $TiO_2$ electrode(ATTE, $5^{\circ}C$/1hr in 0.5 wt% HF-$650^{\circ}C$/5hr). The trend of the rate of hydrogen production, for the ATTEs with different annealing temperature from $350^{\circ}C$ to $850^{\circ}C$, fairly well coincided with the photoelectrical properties measured by potentiostat. The actual chemical bias through imposition of two electrolytes of different pHs between anode(13.68) and cathode(7.5) was 0.24eV.

SiC/SiO2 Interface Characteristics in N-based 4H-SiC MOS Capacitor Fabricated with PECVD and NO Annealing Processes (PECVD와 NO 어닐링 공정을 이용하여 제작한 N-based 4H-SiC MOS Capacitor의 SiC/SiO2 계면 특성)

  • Song, Gwan-Hoon;Kim, Kwang-Soo
    • Journal of IKEEE
    • /
    • v.18 no.4
    • /
    • pp.447-455
    • /
    • 2014
  • In this research, n-based 4H-MOS Capacitor was fabricated with PECVD (plasma enhanced chemical vapor deposition) process for improving SiC/$SiO_2$ interface properties known as main problem of 4H-SiC MOSFET. To overcome the problems of dry oxidation process such as lower growth rate, high interface trap density and low critical electric field of $SiO_2$, PECVD and NO annealing processes are used to MOS Capacitor fabrication. After fabrication, MOS Capacitor's interface properties were measured and evaluated by hi-lo C-V measure, I-V measure and SIMS. As a result of comparing the interface properties with the dry oxidation case, improved interface and oxide properties such as 20% reduced flatband voltage shift, 25% reduced effective oxide charge density, increased oxide breakdown field of 8MV/cm and best effective barrier height of 1.57eV, 69.05% reduced interface trap density in the range of 0.375~0.495eV under the conduction band are observed.