• Journal of Life Science
• /
• v.25 no.11
• /
• pp.1265-1272
• /
• 2015

Barnyard millet Miryang 3 [Echinochloa esculenta (A. Braun)] grains have recently been acknowledged for beneficial health properties due to phenolic ingredients and dietary fiber. This study has been conducted on the anti-diabetic activity of barnyard millet Miryang 3 which shows the strongest anti-inflammatory activity among barnyard millet inhabiting in South Korea. When 80% ethanol (EtOH) extract of barnyard millet Miryang 3 grains were orally administered into db/db diabetic mice for 8 weeks (600 mg/kg/day), the glucose level in blood following fasting appeared to be improved compared to the control group. The results of glucose tolerance test and blood lipid profile assay were similar to those of the metformin-administered positive control group. In addition, the level of body weight increase (8.54±2.24) was lower than the level of metformin-administered group (10.36±3.15); however, there was no subtle difference with negative and positive control groups in terms of food efficiency rates. In addition, total cholesterol levels of the 80% EtOH extract-administered group (160.7±7.6) were significantly reduced compared to the diabetic control group (229.3±47.8) and metformin-administered group (176.0±25.6). Consequently, these results show that barnyard millet grains alleviates many of the diabetic symptoms in vivo non-insulin-dependent diabetes mellitus, and suggest that barnyard millet grains can be applicable in developing new functional food materials.

• Korean Journal of Ecology and Environment
• /
• v.33 no.2 s.90
• /
• pp.109-118
• /
• 2000

The dynamics of inorganic nutrients and phytoplankton population were examined at eight stations of Shihwa Reservoir, which situated near the cities newly constructed and the industrial complex of West-sea in Korea, from January to December 1999. Among environmental factors, average concentration of $NH_4$, SRP and SRSi were $522.7\;{\mu}g\;N/l$, $9.8\;{\mu}g\;N/l$ and $0.26\;{\mu}g\;Si/l$, respectively. Water quality was extremely deteriorated by a great amount of pollutants load into inner reservoir after the event of rainfall. Nutrients concentration was suddenly decreased toward the lower part. While $NO_3$ concentration did not much varied among stations, but it was relatively high in winter season. Chlorophyll-a concentration was high at the upper part of the reservoir, with average of $37.2\;{\mu}/l$, and closely related to the fluctuation of $NH_4$, SRP and SRSi concentrations. The phytoplankton development in the water column was dominated by diatom (autumn), prasinoid (winter) and dinoflagellate (summer). Dominant phytoplankton were composed to Skeletonema costatum of diatom, Prorocentrum minimum of dinoflagellate, Chroomonas spp. of cryptomonad, Eutreptiella gymnastica of euglenoid and Pyramimonas spp. of prasinoid. The large bloom of phytoplankton at the upper zone of the Shihwa Reservoir after inflow of a seawater were consistently observed. In consequence, water quality management of the inlet stream was assessed to be very important and urgent.

• Journal of Korea Water Resources Association
• /
• v.46 no.12
• /
• pp.1181-1191
• /
• 2013

This study have implemented finding the optimal water temperature parameter set for Hapcheon dam reservoir using CE-QUAL-W2 model. In particular the sensitivity analysis was carried out for four water temperature parameters of wind sheltering coefficient (WSC), radiation heat coefficient (BETA), light extinction coefficient (EXH2O), heat exchange coefficient at the channel bed (CBHE). Firstly, WSC, BETA, EXH2O shows relatively high sensitivity in common during April to September, and CBHE does during August to November. Secondly, as a result of identifying depth range of parameter influence, BETA and EXH2O show 0~9 m and 8~14 m which is thermocline layer close to water surface, CBHE is deep layer 12 m away from bottom. Finally, applying annual or monthly optimal parameter sets indicates that the bias between two sets does not show much differences for WSC and CBHE parameters, but BETA and EXH2O parameters show $0.20^{\circ}C$ and $0.51^{\circ}C$ of monthly average biases for two parameter sets. In particular the bias reveals to be $0.4^{\circ}C$ and $1.09^{\circ}C$ during May and August that confirms the necessity of use of monthly parameters during that season. It is claimed that the current operational custom use of annual parameters in calibration of reservoir water quality model requires the improvement of using monthly parameters.

• Korean Journal of Food Science and Technology
• /
• v.14 no.4
• /
• pp.301-308
• /
• 1982

Chungkook-jang Koji was fermented with rice straw at $40^{\circ}C\;and\;50^{\circ}C$ for 72 hours. The changes of proximate composition, pH, titrable acidity, nitrogen compounds, protease activity and free-amino acids during the fermentation were investigated. Moisture, lipid and protein contents remained essentially unchanged during the fermentation. The pH was gradually increased from 6.4 to 7.46 and 7.82 at $40^{\circ}C\;and\;50^{\circ}C$, respectively, after 72 hour fermentation. Amino type and water soluble nitrogen increased as fermentation progressed. however, the former slightly decreased after 60 hour fermentation. Chungkook-jang fermented at $40^{\circ}C$ showed somewhat higher protease activity than $50^{\circ}C$. However, protease activity at both fermentation temperatures showed the same trend; that is, it increased until 48 hour fermentation and thereafter decrease. Free amino acid content of Chung-kook-jang after 72 hour fermentation at $40^{\circ}C$ was 6 times greater than that of the steamed soybean, while it was 2.5 times greater at $50^{\circ}C$. Based on these results. it seems that the optimum fermentation conditions for Chungkook-jang were $40^{\circ}C$ and 72 hours.

• Journal of the Korean Society of Radiology
• /
• v.4 no.1
• /
• pp.5-9
• /
• 2010

In recent, a digital x-ray detector attracted worldwide attention and there are many studies to commercialize. There are two methods in digital x-ray detector. This method is an Indirect method and Direct method. This study is to see the differences between the digital x-ray detector based on a-Se used in the existing indirect conversion method and an x-ray conversion material that has better SNR(Signal-to-noise ratio) and property than the a-Se. To solve the problem that is difficult to make a large area film using Screen-Print method, we used a Screen-Print method. In this study, we used a polyclystal $HgI_2$ as x-ray conversion material and a sample thickness is $150{\mu}m$ and an area is $3cm{\times}3cm$. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a Magnetron Sputtering System and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$ and then we evaluated darkcurrent, sensitivity and SNR of the $HgI_2$ film are measured, then we evaluated the electrical properties. And we used a current integration mode when I-V test. This experiment shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high darkcurrent. Through fabricating of various thicknesses and optimal electrodes, we will optimize SNR in the future work.

• Journal of Korean Philosophical Society
• /
• v.130
• /
• pp.277-304
• /
• 2014

Der vorliegende Beitrag zielt darauft ab, zwei Perspektiven $f{\ddot{u}}r$ die Kunst bei Kant und Nietzsche und ihre Schlussfolgerungen zu $er{\ddot{o}}rtern$. Kants Kritik der Urteilskraft hat eine enorme Rolle in der Geschichte der ${\ddot{A}}sthetik$ gespielt. $F{\ddot{u}}r$ Kant sollen ${\ddot{a}}sthetische$ Urteile ebenso wie Erkenntnis- und Moralurteile $allgemeing{\ddot{u}}ltig$ sein, obwohl sie auf einem $pers{\ddot{o}}nlichen$ Geschmack beruhen. Die $Allgemeing{\ddot{u}}ltigkeit$ des $Sch{\ddot{o}}nen$ sei $m{\ddot{o}}glich$, weil sie nicht auf dem Gegenstand, sondern auf dem transzendentalen Subjekt basiere. Die $sch{\ddot{o}}ne$ Kunst als Kunst des Genies soll uns wie die $Natursch{\ddot{o}}nheit$ ohne Interesse wohlgefallen. Nietzsches Stellungnahme zu Kants ${\ddot{A}}sthetik$ ist sehr kritisch. Nietzsches erster Kritikpunkt richtet sich gegen das 'interesselose Wohlgefallen'. Gegen Kant behauptet Nietzsche, dass die $Sch{\ddot{o}}nheit$ sehr wohl mit Interesse verbunden ist. Grund $daf{\ddot{u}}r$ ist, dass das $Sch{\ddot{o}}ne$ wesentlich aus dem Willen zur Macht entspringt. Der zweite Kritikpunk Nietzsches liegt darin, dass in Kants ${\ddot{A}}sthetik$ die Moral im Vordergrund steht. Das $Sch{\ddot{o}}ne$ ist $f{\ddot{u}}r$ Kant durch die Moral gerechtfertigt. Nietzsche dreht diese Stellung der Moral zur Kunst um. Der dritte Kritikpunkt Nietzsches ist, dass Kant statt von der Erfahrung des $K{\ddot{u}}nstlers$ (Schaffenden) aus das ${\ddot{a}}sthetische$ Problem zu betrachten, allein vom Zuschauer (Empfangenden) aus ${\ddot{u}}ber$ die Kunst und das $Sch{\ddot{o}}ne$ nachgedacht habe. $F{\ddot{u}}r$ Nietzsche ist die Kunst $prim{\ddot{a}}r$ vom $K{\ddot{u}}nstler$ aus zu verstehen. Nietzsches Physiologie der Kunst ist mit dem Begriff 'Leib' $verkn{\ddot{u}}pft$, d.h. Nietzsche behauptet, dass physiologische und ${\ddot{a}}sthetische$ Prozesse wesentlich $zusammenh{\ddot{a}}ngen$. Die Schlussfolgerung der Physiologie der Kunst lautet: erstens, jeder Mensch ist $K{\ddot{u}}nstler$, sofern er schaffend ist, und zweitens, die Welt selbst ist nichts als Kunst. Nietzsches Physiologie der Kunst hat einen $gro{\ss}en$ Einfluss auf die $gegenw{\ddot{a}}rtige$ Kunst $ausge{\ddot{u}}bt$ und kein anderer Philosoph hat auf die $gegenw{\ddot{a}}rtige$ Kunst nachaltiger gewirkt.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.114-133
• /
• 2013

This study aims to identify the natural damage of the Samcheonsaji Temple Site in Bukhansan National Park and to suggest the plans to minimize damage for the remains. The types of natural damage are classified into direct vegetation damage, indirect topographical damage, and artificial damage. The most popular causes of damage to temple sites include the roots of trees as direct vegetation damage and the soil erosion by rain or stream as topographical damage. Direct vegetation damage includes burial remains damaged by the root of trees and vines, but it is often observed that some trees have contributed to protection against collapse. Indirect topographical changes have damaged the ruins by soil erosion caused by floods or typhoons. Vegetation changes due to topographical reasons have also caused damage. Artificial reasons of damage include forestry operations and compaction by hikers. Based on the analysis of the findings, the following could be suggested as plans to resolve these problems: 1. Natural damage occurs slowly due to negligence. Therefore, it could be reduced by forestry improvement, including forest density control through thinning, planting to prevent landslides, maintaining grasslands nearby. 2. Deciduous broadleaf trees can be planted to reduce soil erosion by rainfall. It is necessary to maintain the density of forests at around $0.02{\sim}0.18trees/m^2$. 3. It would be good to grow Quercus spp and Carpinus spp or weaken the community of Robinia pseudoacacia and Pueraria lobata which disturb the ecosystem. Samcheonsaji Temple Site is located in Mt. Bukhan National Park that is a publicly owned property. Therefore, it is constantly maintained for natural preservation and vegetation management could be considered for the preservation of historical remains.

• Journal of the Korean Electrochemical Society
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2023

The cathode, which is one of the four major components of a lithium secondary battery, is an important component responsible for the energy density of the battery. The mixing process of active material, conductive material, and polymer binder is very essential in the commonly used wet manufacturing process of the cathode. However, in the case of mixing conditions of the cathode, since there is no systematic method, in most cases, differences in performance occur depending on the manufacturer. Therefore, LiMn₂O₄ (LMO) cathodes were prepared using a commonly used THINKY mixer and homogenizer to optimize the mixing method in the cathode slurry preparation step, and their characteristics were compared. Each mixing condition was performed at 2000 RPM and 7 min, and to determine only the difference in the mixing method during the manufacture of the cathode other experiment conditions (mixing time, material input order, etc.) were kept constant. Among the manufactured THINKY mixer LMO (TLMO) and homogenizer LMO (HLMO), HLMO has more uniform particle dispersion than TLMO, and thus shows higher adhesive strength. Also, the result of the electrochemical evaluation reveals that HLMO cathode showed improved performance with a more stable life cycle compared to TLMO. The initial discharge capacity retention rate of HLMO at 69 cycles was 88%, which is about 4.4 times higher than that of TLMO, and in the case of rate capability, HLMO exhibited a better capacity retention even at high C-rates of 10, 15, and 20 C and the capacity recovery at 1 C was higher than that of TLMO. It's postulated that the use of a homogenizer improves the characteristics of the slurry containing the active material, the conductive material, and the polymer binder creating an electrically conductive network formed by uniformly dispersing the conductive material suppressing its strong electrostatic properties thus avoiding aggregation. As a result, surface contact between the active material and the conductive material increases, electrons move more smoothly, changes in lattice volume during charging and discharging are more reversible and contact resistance between the active material and the conductive material is suppressed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.

• Bangmulgwan gwa yeongu (The National Museum of Korea Journal)
• /
• v.1
• /
• pp.96-119
• /
• 2024

Some inscribed bricks excavated from the western region of North Korea have been found bearing an era name used after 314 when the Nangnang and Daebang Commanderies had been completely ousted from the region. Others have been found with an era name used in the early fifth century. This indicates that the tradition of constructing brick chamber tombs was sustained for a century after the disappearance of the two commanderies. However, brick chamber tombs were never adopted as a burial system for the ruling class of the Goguryeo Kingdom. The Tomb of Jang Mui built in 348 and the Tomb of Dongni built in 353 both departed from the typical brick chamber tomb style of the region, and elements associated with stone chamber tombs were added to them. The Tomb of Dongsu (Anak Tomb No. 3), which is similar to the other two tombs in that its occupant is of Chinese descent, was constructed in 357 not as a brick chamber tomb, but as an earthen mound tomb with a stone chamber. Still, the continuation of brick chamber tomb tradition in the next half century has been somewhat puzzling. Although dated inscribed bricks have served as important evidence for understanding the continuation of the brick chamber tomb tradition, there has been a problem of continually repeating previous studies. It has also been pointed out that there was an error in the interpretation of era names in some of the dated inscribed bricks that had been believed to have been produced in or after 357. For example, "second year of Taean" (Taian in Chinese), which had been understood to correspond to 386 (during the Former Qin Dynasty), in fact refers to 303 (during the reign of Emperor Hui of the Western Jin Dynasty). In the case of "first year of Geonsi" (Jianshi in Chinese), which had been believed to indicate 407 (during the Later Yan Dynasty), it actually refers to 301. "Geonsi" is the era name used during the period when Sima Yun ousted Emperor Hui of the Western Jin Dynasty and briefly occupied imperial throne. Outside these two cases, the remaining dated inscribed bricks thought to have been produced in or after 357 are those dated to the "third year of Wonheung" (Yuanxing in Chinese). However, a reexamination of these bricks reveals that what is really "Yeongheung" (Yongxing in Chinese) has been misread as "Wonheung." The third year of Yeongheung corresponds to either 306 during the Western Jin Dynasty or 352 during the Later Zhao Dynasty, but it is highly probable that it refers to 306. This means that there is no conclusive evidence to support the hypothesis that brick chamber tombs were built in the area until the late fourth century and even into the early fifth. Accordingly, the Tombs of Jang Mui and Dongni should be viewed as the latest known brick chamber tombs to be constructed in the western region of North Korea. Moreover, brick chamber tombs appear to have been no longer built in the area around the time when the Tomb of Dongsu was constructed. These speculations accord with the historical circumstances of the time.